16 Slots Dual Power Supply 19' 4U rack-mount chassis for 4V /8V /16V cards

The 16 Slots Dual Power Supply 19' 4U rack-mount chassis for 4V /8V /16V cards can akes your installation easier. The chassis employs a 220 VAC/48 VDC Switch Mode Power Supply(SMPS) design, which reduces the possibility of a single module failure causing a shutdown or a major failure of other modules within the chassis. The high reliability and stability ensures that if one module shuts down, the operation of the other modules remains unimpaired. 0ne or two air-cooling fans are installed inside to further strengthen the superior performance of the system and eliminate the necessity for periodic maintenance. Status information can be read through the LED indicators on the installed modules. All of the modules installed in the chassis are hot swappable, which makes it unnecessary to power-down.

Key Features

Panel material: Iron
It can support 16 pcs of 4 Channel Optic Video Multiplexer .
Standard:IEEE802.3 10/100 Base T Ethernet, IEEE802.3U, 100Base V TX/FX Fast Ethernet, IEEE802.3 x Flow control, IEEE802.3.1q VLAN, IEEE802.1p QoS, IEEE802.1d Spanning Tree
Power configuration: Dual power supply for warm backup mode
Hot Swap Support for the Multiplexers to ensure a flexible connection
Equipped with a second, redundant Power Supply for maximum stability and reliability

Number of slots	16
Video Multiplexers adapter	16 Slots chassis Card Type Video Multiplexers
Power in	AC 100V~260V, 50~60Hz; OR DC 48V
Power out	DC + 5V, 24A(dual power)
Diameter of DC plug	2.5/5.5mm
Pipple	≤50Mv
Noise	≤50Mv
Protection of power supply	circuit-breaker when over voltage, circuit-breaker when over flow,circuit-breaker when short circuit
Operating Temperature	0ºC~50ºC
Storage Temperature	0ºC~85ºC
LCD Displaying	160×32 Pixels
Relative Humidity	5%~95%
Dimensions	L485, W231,H90 mm; 19 inches 2U