EnglishEspañolFrançaisDeutschPortuguês日本語한국인
4-Port 10/100/1000M POE Switch with 1-Port 1000M Fx

Press Esc key to close this popup
  • 4-Port 10/100/1000M POE Switch with 1-Port 1000M Fx

4-Port 10/100/1000M POE Switch with 1-Port 1000M Fx

Product Item: #3576
P/N: FM-POE3603
US$75.83



Order Today, Ship before 04/02/2024, from U.S. or HK
  • Description
  • Datasheet
  • Tags

4-Port 10/100/1000M POE Switch with 1-Port 1000M Fx

 

Modern business networks are used for increasingly diverse applications – traditional data streams, VoIP voice traffic, video output from digital security cameras and remote control devices to name a few. The range of devices attached to today’s converged network often need to be supported not just in terms of data –equipment such as VoIP IP telephones and Wireless Access Points frequently need to be powered in physical locations where mains power is not available or difficult to deliver. Providing power to such devices via an Ethernet UTP cable is an elegant and easy to implement solution.
FM-POE3603 is a 5 port (1FX+4TP) 10/100/1000M PoE (PSE) Ethernet Switch. The optical fiber port can greatly extend the transmission distance limitation of normal CAT5e UTP cable. All the four 10/100/1000Mbps UTP RJ-45 ports supports full duplex 10/100/1000M connectivity (half duplex only supported in 10/100M mode). Complied with IEEE802.3at and IEEE802.3af standard, the PoE(PSE) Ethernet Switch is a Power Sourcing Equipment (PSE) which combines data transfered over cable with 48V (typical) power supply, providing power to IEEE802.3at /IEEE802.3af powered device (PD) over CAT5e UTP cable (cable length up to 100meters /330feets). All the four UTP RJ-45 ports are organized to be PoE output port and each PoE port can output up to 60Watts (DC 48V/1.2A) power into CAT5e twisted-pair cable.

 

Key Features

  • Support one 1000Base-FX fiber optical port and four 10/100/1000Base-T UTP RJ-45 ports
  • 4 ports IEEE802.3at /IEEE802.3af PoE/PSE output
  • high power output up to 60Watts per port
  • Support IEEE 802.3z/AB 10/1001000Base-T and 1000Base-SX/LX/ZX standards
  • Supports IEEE 802.3x flow control - Supports 9216 bytes jumbo packet length
  • Built-in 1Mbits SRAM for packet buffer, with 4K-entry lookup table
  • Low power consume, low heat, and good reliability
  • Choice of SC, SFP, BiDi or other connectors for multimode and singlemode

Specifications

Data Rates 10/100/1000Mbps(IEEE802.3z/AB 10/100/1000Base-T)
1000Mbps (1000Base- SX/LX/ZX)
Input Power Requirements
Input voltage Input voltage
Power over Ethernet Output
Pin Assignment and Polarity 1/2 (V+),3/6 (V-) output power ≤30Watts
1/2 /4/5(V+),3/6/7/8 (V-) output power >30Watts
Environmental Conditions
Operating temperature 0℃ to 40℃
Cooling free air convection
Storage temperature -20℃ to +85℃
Operating Humidity 90% max, non-condensing
Mechanical Specifications
Case Material Iron
Case Color Silver grey
Net Weight 410g approx. /unit
(Do not include external power adaptor)
Dimensions 158(W) x 27(H) x 95(L) (mm)
(Do not include transceiver length)
Connectors
DC Inlet DC470-2.0
LAN 4 port Shielded RJ-45

 

Ordering Information

Part Number Description X X X X X X X
FM-POE3603-XX-XXXX 4-Port 10/100/1000M POE Switch with 1-Port 1000M Fx T: 1:15.4W 2: 2port POE S: Duplex Single-mode 3: TX 1310nm S: SC 05: 550M
IEEE802.3at 2: 25W 4: 4port POE M: Duplex Multi-mode 4: TX 1490nm F: FC 2: 2KMM
F: 3: 30W   B: Simplex Single-mode 5: TX 1550nm T: ST 20: 20KM
IEEE802.3af 5: 50W   SFP: SFP Slot 8: TX 850nm L: LC 40: 40KM
N:            
Non-standard            

Data Rates 10/100/1000Mbps(IEEE802.3z/AB 10/100/1000Base-T)
1000Mbps (1000Base- SX/LX/ZX)
Input Power Requirements
Input voltage Input voltage
Power over Ethernet Output
Pin Assignment and Polarity 1/2 (V+),3/6 (V-) output power ≤30Watts
1/2 /4/5(V+),3/6/7/8 (V-) output power >30Watts
Environmental Conditions
Operating temperature 0℃to 40℃
Cooling free air convection
Storage temperature -20℃to +85℃
Operating Humidity 90% max, non-condensing
Mechanical Specifications
Case Material Iron
Case Color Silver grey
Net Weight 410g approx. /unit
(Do not include external power adaptor)
Dimensions 158(W) x 27(H) x 95(L) (mm)
(Do not include transceiver length)
Connectors
DC Inlet DC470-2.0
LAN 4 port Shielded RJ-45


Datasheet to Download

Add your Tags



Please tell us what you think and share your opinions with others. Be sure to focus your comments on the product.



Copyright © 2009-2024 Fiber-MART.COM All Rights Reserved. Privacy Notice. Terms of Service
Fibermart ISO9001Fibermart Secure Certificate
Product Tags: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Email us