How to Use Field Assembly Connector?

How to Use Field Assembly Connector?

 

The expansion of FTTH application has brought prosperity to the manufacturing of field assembly connectors for fast field termination. This type of connector gains its popularity due to the applicability to cable wiring and compact bodies which are easily stored in optical fiber housings. With excellent features of stability and low loss, field assembly connector has now become a reliable and durable solution for fiber optic systems. However, do you really know the field assembly process of the connector? This article provides an easy guide to show you the way of using field assembly connector.

 

Introduction to Field Assembly Connector

 

Before getting to know the instruction process, let’s have a look at the basic knowledge about field assembly connector. Field assembly connector or fast connector is an innovative field installable optical fiber connector designed for simple and fast field termination of single fibers. Without using additional assembling tools, field assembly connector can be quickly and easily connected to the drop cable and indoor cable, which saves a lot of required termination time. It is specially designed with the patented mechanical splice body that includes a factory-mounted fiber stub and a pre-polished ceramic ferrule. Field assembly connector is usually available for 250 µm, 900 µm, 2.0 mm and 3.0 mm diameter single-mode and multimode fiber types. The whole installation process only takes about 2 minutes which greatly improves the working efficiency.

 

Internal Structure of Field Assembly Connector

 

From the following figure, we can see the specific internal structure of field assembly connector. The ferrule end face of the connector is pre-polished in a factory for later connection with the fiber. A mechanical splice is also formed at the end of the ferrule for mechanical fixation of optical fiber. The mechanical splice consists two plates, one with a V groove, another with flat surface above the V groove, and a clamp for the insertion of the two plates. When inserting the fiber, a wedge clip will keep the V groove open for easier installation. After the fiber insertion, the wedge clip can be extracted from the V groove.

 

Features and Applications

 

Key Features

Field-installable, cost-effective, user-friendly

No requirement for epoxy and polishing

Quick and easy fiber termination in the field

No need for fusion splicer, power source and tool for pressure

Visual indication of proper termination

Applications

Fiber optic telecommunication

Fiber distribution frame

FTTH outlets

Optical cable interconnection

Cable television

 

Conclusion

Fiber assembly connector enables quick termination to improve reliable and high connector performance in FTTH wiring and LAN cabling systems. All the above solutions provided by fiber-mart.com are available to meet your requirements. Please visit the website for more information.