16E1+10/100M PDH Fiber Optical Multiplexers Singlemode Dual Fiber 20KM 19 Inch Rack(with the orderwire phone)
The 16E1+10/100M PDH Fiber Optical Multiplexers is a fiber media transport for 16E1 + 1 10/100BaseT transmission. The BNC model provides unbalanced 75 Ohm coaxial connections while the RJ-45 model provides balanced 120 Ohm connections over twisted pair wiring. All media converters are available with either multi-mode or single-mode optical tranceivers and with connectors for SC, ST, or FC. In single mode they are available in up to 120 km versions reach, which will provide the ability to transmit and receive data using only a single optical fiber pair.
Specifications
-
Single mode dual optical port-16 channels of E1 ports
-
Low power consumption
-
ISO certification
-
Optional Power redundancy to ensure stable system
-
Optional fiber redandancy are provided
-
Optional function of ALS and SNMP
-
With the orderwire phone
Main Feature :
-
The 16E1 to fiber multiplexer
-
1 Enthernet port share 10M or 100M bandwidth
-
Provide function of 16E1 remote loop,fiber local loop,and 1 interface phone
-
Optional power 1+1 to ensure stable system
-
Two fiber two direction and single fiber two direction
-
1+1 power, orderwire phone and the ALS and SNMP are optinal,Please state the requirement when in order
-
16E1 PDH multiplexer realizes 1~16E1 transmission over fiber
-
E1 spur track loop back testing features, easy to be installed and maintenance
-
External dimensions: 19-inch rack (with distribution frames rack)
-
Provided the 1+1 fiber back up
-
Optical optional by customer 's requirement
Interface
E1 interface |
16E1 interface for 16E1 |
E1 rate: 2.048Mb/s±50ppm |
Code type: HDB3 |
E1 Style: Pinfet
|
E1 comply with ITU-T G.703 |
Jitter compl y with ITU-T G.823 and G.742 |
E 1 with DB37. Be ab le to be with 75Ω (BNC) or 120Ω (RJ45) by adaptor in the accessory |
Fiber |
Optical rate: 42.240Mbit/s |
optical style:4B5B
|
Default: dual fiber, single mode, 20km (40km optional) |
connector: FC /SC/ST |
wavelength:1310nm |
Receiver sensitivity:≤ -38dBm(BER ≤ 10-11) |
Ethernet |
1 Ethernet ports with RJ45 connector |
MAC address table capability : 1024
|
MAC address table aging time |
The minimum frame length : 64bytes |
The maximum frame length : 1916 bytes |
Working mode : full/half duplex configurable |
Support VLAN, Stream control |
Bandwidth : 1 Ethernet ports shared 10 or 100M bandwidth |
Power Requirements
-
Power Input: AC /DC optional
-
AC180V~240V
-
DC-36V~DC-72V
-
DC+20V~DC+36V
-
Power Consumption: <6Walt
Working Environment
-
Operating Temperature: 0℃ ~+50℃
-
Storage Temperature: -40℃ ~+70 ℃