19 inch, MTP/MPO Panel, 1U Rack Chassis, LGX - MTP/MPO Cassette Holder
MTP/MPO 1U 19"Rack Mount is an integrated unit for fiber management with a protection function, to hold 3 pieces of Fiber-MART's MTP/MPO LGX cassettes.
The type of MTP which have became the tendency in Europe&America fiber communications area at present
Mount to standard EIA 19 " rack railsSteel construction with Black Powder CoatingEnsure signal integrity, proper cable routing, bend radius control and cable protection
Provide higher patch field density in fewer rack units saving valuable spaceAssures flexibility and ease of network deployment and moves, adds, and changesProvides a complete system solution for connectivity
Fiber-MART's MTP/MPO Rack Mount with high technology requirements as follows
a. Sandblasting surface treatment, and black anodized.
b. Remove all burrs and oil pollution.
c. All sharp edge chamfer (C 0.5).
d. The surface must be not scratch, grooves, and loss color, the hole is also not deformation, gaps and sawtooth.
e. Once complete installation, there is no buckling and deformation phenomenon.
The Assembly Diagram of MTP/MPO LGX Cassette and Rack Mount
In the picture, 12 fibers LC MTP/MPO LGX Cassette can be replaced with 24 fibers LC MTP/MPO LGX Cassette, or 12 fibers SC/ST/FC MTP/MPO LGX Cassette.
Fiber-MART provides the custom MTP/MPO Rack Mount, for example
1 U Rack Mount to hold 3 pieces of MTP/MPO LGX Cassette.
4U Rack Mount to hold 12 pieces of MTP/MPO LGX Cassette.
Other size requirements, please kindly contact us at [email protected]
1 LGX Cassette=156x102x29mm Standard MTP/MPO Casset