Recent Order
|
High Power 1550nm Amplifier for FTTH 23 dBm Output 8 ports
Fiber-Mart FTTH-EYDFA-XDB-8P series is a Er/Yb Doped Fiber Amplifier that utilizes multimode laser pumping, all-fiber combiner and Erbium/Ytterbium double-clad, large-core fiber technologies to provide high RF output power over wide frequency bands with low distortion and high efficiency in low cost. Features
Application
Simple Diagram
Epon System
Block Diagram
|
Category | APP | Mechanical | Configure | Input Power | Power/CH | Ports | Power1 | Power2 | Connector | WDM |
HA | 1 | 2 | 2 | 0 | 17 | 32 | 2 | 2 | 2 | 0 |
HA: High Power Amplifier | 1:CATV | 1:1U | 1:Normal | 0:-3~+10dBm | 17:17dBm | 1:1 port | 1:110VAC | 1:110VAC | 1:SC/UPC | 1:w/ WDM |
2:2U | 2:High End | 1:+5~+15dBm | 18:18dBm | 16:16 ports | 2:220VAC | 2:220VAC | 2:SC/APC | 0:w/o WDM | ||
2:0~+10dBm | …… | 24:24 ports | 3:110~220VAC | 3:110~220VAC | 3:FC/UPC | |||||
3:-8~+10dBm | 33:33dBm | 32:32ports | 4:-48VDC | 4:-48VDC | 4:FC/APC | |||||
4:Others | 0: None | 5:LC/UPC | ||||||||
6:LC/APC |
Note 1: 1U rack, Maxim ports number: 4(SC/APC), or 8(LC/APC); 2U rack, Maxim ports number: 16(w/WDM), or 32(w/o WDM)
Note 2: High End configure with SNMP Net management, with standby switch function by RS485 connect.
Parameters | Symbol | Min | Typ | Max | Unit |
Operation Wavelength | λc | 1540 | 1550 | 1565 | nm |
Saturated output power (1) | Po | 13 | 33 | dBm | |
Input power | Pi | -3 | 10 | dBm | |
Gain | G | 30 | dB | ||
Noise Figure (2) | NF | 6 | dB | ||
Output Power Stability | ΔPo | ±0.05 | ±0.2 | dB | |
Input Isolator | ISOi | 30 | dB | ||
Output Isolator | ISOo | 30 | dB | ||
Input Pump Leakage | PumpLin | -35 | dBm | ||
Output Pump Leakage | PumpLout | -45 | dBm | ||
Return Loss | RL | -45 | dB | ||
Polarization Dependent Gain | PDG | 0.3 | dB | ||
Polarization Mode Dispersion | PMD | 0.5 | ps | ||
Operating Temperature | Tw | -5 | 60 | ℃ | |
Storage Temperature | Ts | -40 | 80 | ℃ | |
Humidity (3) | 10 | 85 | % | ||
Power Supply | Vps | 170 | 264 | VAC | |
Power Consumption | P | 50 | W |
(1): Customer optional
(2): Test at +5dBm input
(3): No condensation