36 Fibers OM3 12 Strands MPO Trunk Cable 3.0mm LSZH/Riser

36 Fibers, MPO to MPO, 50um OM3 Fiber, 12 Strands - MPO Backbone Trunk Cable

MPO is the high dense degree of optical fiber pre-connect system,which is generally use in three areas.

The Data Center application with high dense degree environment The optical fiber to the building The internal connector application in fiber equipment.

Fiber-MART's MPO fiber patch cable is compliant to IEC-61754-7 and TIA-604-5(FOCIS-5) standard. It can be widely used for10G upgrade to 40G/100G data center.

MPO Connector Types

MPO Male with Pins	MPO Female without Pins
Two other clearly visible features are the noses and guide grooves (keys) on the top side.(Note: Female connector need to connect with male connector type.)

Pre-terminated MPO Technology-Polarity

The three polarity methods Type A, Type B and Type C are used to guarantee the right bi-directional allocation.

Assembly Structure Illustration

The picture above is a 72 fibers trunk cable which is for your reference only.

MPO Trunk Fiber Patch Cables are terminated with MPO connector on both end.
1.The default diameter of the MPO cable is 3.0mm.
2.The default color of the single mode MPO connector is Blue.
3.The diameter of branch cable could be choose as 0.9mm,2.0mm,please kindly contact us at [email protected] for other diameter standard.
4.Due to Inventory was Changed frequently,36 fiber cable will be instead of by 3x12Fiber cable when the total order volume is less than 1000m.
5.Fiber-MART can also custom the pulling eyes, welcome to contact us if you need.

MTP&MPO Difference

The term MTP is a registered trademark of US Conec, it has been the main trend in European and American areas.

MTP/MPO Machinery & Testing Equipment

1	Our adopt industry's leading high-performance polishing machine, and complemented by precision plates holders designed for MT ferrules.
2	The industry leading device of 3D interferometer provides verification of MTP/MPO polishing process, the interferometer making all parameters of hte polished MT ferrule complies and exceeds industry standards.
3	After the 3D interference detection, the flexibility of the tester provides the the complete spectrum of optical testing required for complex and high fiber count cable assemblies.

Parameter Reference

Type	Single mode		Single mode		Multi mode
	(APC polish)		(PC polish)		(PC polish)
Fiber count	8, 12, 24 etc.		8, 12, 24 etc.		8, 12, 24 etc.
Fiber type	G652D, G657A1 etc.		G652D, G657A1 etc.		OM1, OM2, OM3 etc.
Maximum Insertion Loss	Elite	Standard	Elite	Standard	Elite	Standard
	Low Loss		Low Loss		Low Loss
	≤0.35 dB	≤0.75 dB	≤0.35 dB	≤0.75 dB	≤0.35dB	≤0.60dB
Return Loss	≥55 dB		≥45 dB		≥20 dB
Durability	≥200 times		≥200 times		≥200 times
Operating Temperature	-10 ~ +70		-10 ~ +70		-10 ~ +70
Test Wavelength	1310nm		1310nm		850nm

Note: Maximum Bandwidths of Different Multimode Fibers
OM1 – 62.5 um Core – 10GBit up to 33 meters, gigabit up to 300m
OM2 – 50 um Core – 10GBit up to 82 meters,gigabit up to 500m
OM3 – 50 um Core, Laser Optimized – 10GBit up to 300 meters,gigabit up to 1000m
OM4 – 50 um Core, Laser Optimized – 10GBit up to 550 meters,gigabit up to 1000m

Make To Order

Fiber Type	Cable Type	Fiber Count	Termination	Cable Length	Breakout Length (Inches)	Breakout Termination	Polarity	Lableing
OM4 OM3 OS1/2 OM2 OM1	LSZH Bunch Riser Bunch LSZH Ribbon Riser Ribbon	12 24 36 48 72 96 144	First Connector MPO Female MPO Male APC MPO Female APC MPO Male	1~999	12~99 (36" is typical)	0.9mm (standard) 2.0mm 3.0mm	Style A Style B Style C	Standard Custom
			Second Connector MPO Female MPO Male APC MPO Female APC MPO Male

About Part Number: FS=Fiber-MART; 12= 12 Fiber; SM= Single-mode; 2=12 standard; M=MPO; x= Length.