4E1 10/100M 1+1 Fiber Back up Fiber Optical Multiplexers Singlemode Dual Fiber 20KM 19 Inch Rack
1+1 series fiber optical MUX is point-to-point optical transmission equipment developed based on ultra large scale integrated circuit.Have 1 ethernet interface,share 10 or 100M bandwidth. Have perfect alarm, high reliability and stabilization, low power consumption, high integration, easy installation and maintenance. The device is popularly with telecommunication operator. It is suitable in business for communication operator, government and kinds of entities.
Specifications
-
Single mode dural optical port-4 channels of E1 ports
-
Enthernet port share 10M or 100M bandwidth
-
Low power consumption
-
ISO certification
-
1+1 fiber back up are provided
-
Optional Power redundancy to ensure stable system
-
Optional function of ALS and SNMP
-
Optional orderwire phone are provided
Main Feature
-
The 4E1 to fiber multiplexer
-
1 Ethenet ports share 10 or 100M bandwidth
-
Provide function of 4E1 remote loop,fiber local loop,and 1 interface phone
-
Optional power 1+1 to ensure stable system
-
Two fiber two direction and single fiber two direction
-
1+1 power,orderwire phone and the ALS and SNMP are optinal,Please state the requirement when in order
-
4E1 PDH multiplexer realizes 1~4E1 transmission over fiber
-
E1 spur track loop back testing features, easy to be installed and maintenance
-
External dimensions: 19-inch rack (with distribution frames rack)
-
Provide the 1+1 fiber back up
-
Optical optional by customer 's requirement
Interface
E1 interface |
4E1 interface for 4E1 |
E1 rate: 2.048Mb/s±50ppm |
Code type: HDB3 |
E1 Style: Pinfet
|
E1 comply with ITU-T G.703 |
Jitter compl y with ITU-T G.823 and G.742 |
E 1 with DB37. Be ab le to be with 75Ω (BNC) or 120Ω (RJ45) by adaptor in the accessory |
Fiber |
Optical rate: 16.896Mbit/s |
optical style:1B1H
|
Default: dual fiber, single mode, 20km (40km optional) |
connector: LC |
wavelength:1310nm |
Receiver sensitivity:≤ -38dBm(BER ≤ 10-11) |
Ethernet |
1 Ethernet ports with RJ45 connector |
MAC address table capability : 1024
|
MAC address table aging time |
The minimum frame length : 64bytes |
The maximum frame length : 1916 bytes |
Working mode : full/half duplex configurable |
Support VLAN, Stream control |
Bandwidth : 1 Ethernet ports shared 10 or 100M |
Power Requirements
-
Power Input: AC /DC optional
-
AC180V~240V
-
DC-36V~DC-72V
-
DC+20V~DC+36V
-
Power Consumption: <6Walt
Working Environment
-
Operating Temperature: 0℃ ~+50℃
-
Storage Temperature: -40℃ ~+70 ℃