96 Fibers FM-S018 Series Fiber Optic Splitter Closures 5 Entries Vertical/Dome
FM-S018 type of Fiber Optic Splice Closure (FOSC) is a member of dome closure series, the product adopts fully-mechanical sealing structure, only using silicone rubber sealing gasket to ensure the good sealing performance of fiber cable with the diameter within 13mm. The function of the product is in the optical transmission link, to provide through, branching connection and related connecting protection.
Key Features
1. It could be installed 36pcs SC/PC Pigtails of 1.5
2. It applies to PLC splitter with Max ratio 2:32 or 2*2:16.
3. This model has four small round ports and one large round port.
4. The Max quantity of SC adaptor is 36pcs. (Other types of adaptor could be customized).
5. The sealing component is made from vulcanized rubber.
6. The sealing method adopts screw pressure, sealing performance is excellent, convenient to re-open, especially suitable for optical splitter used.
7. Adopt modified PP material with high strength and anti-corrosion to make the closure have a longer lifetime and excellent sealing performance.
8. There are various sealing accessories of soft cable to be chosen
Main Technical Parameters
The application of temperature : -40℃~65℃
Atmospheric pressure: 70~106KPa
Resist pull: >1000N
Resist pressure: >2000N/10cm2pressure, time 1min
Insulation resistance: >2×104MΩ
Dielectric strength: 15KV (DC)/1 min spark-over and no flying arc.
Specifications
Applies to PLC splitter
Fully-mechanical sealing structure
IP safety rate is IP68
The sealing method adopts screw pressure
This model is suitable for different methods of branch connection, including branching of uncut cable.
It could be used for aerial, pole-mounting, wall-mounting and underground application.
The model is excellent in sealing performance, easy for installation, wide application and is prior choice of fiber connection equipment.
Number of fibers:96
Length:420 mm ,Diameter:190 mm
Weight: 3.5kg
Note: This Fiber Splice Closure belongs to Fiber Optic Splitter type and the charges do not include Fiber Adapter, but we provide it to our customers, please contact [email protected]
Sample Pictures
Basic structure and configuration
Dimension and capacity;
Outside dimension (LxD) |
420mm×190mm |
Weight (excluding outside box) |
2300g-2500g |
Number of inlet/outlet ports |
5 |
Diameter of fiber cable |
Φ8mm - Φ25mm |
Capacity of FOSC |
Bunchy: 24—96(fibers) |
Ribbon: 144(fibers) |
Main components
No. |
Name of components |
Quantity |
Usage |
Remarks |
1 |
FOSC cover |
1 piece |
Protecting fiber cable splices in whole |
Internal diameter: |
|
|
|
|
355 ×150(mm) |
2 |
Fiber optic splitter |
2 trays for 1x16, 3 trays for 1x32 |
Fixing heat shrinkable protective sleeve and holding fibers |
Suitable for: 24 cores |
3 |
Fiber holding tray |
1 pcs |
Holding fibers with protective coat |
|
4 |
Foundation |
1 set |
Fixing fiber cable, reinforced core and FOST |
|
5 |
Base |
1 set |
Fixing internal and external structure |
|
6 |
Seal fitting |
1pieces |
Sealing between FOSC cover and base |
|
7 |
Pressure testing valve |
1 set |
After injecting air, it is used for pressure testing and sealing testing |
Configuration as per requirement |
8 |
Earthing deriving device |
1 set |
Deriving metallic parts of fiber cable in FOSC for earthing connection |
Configuration as per requirement |
Main accessories and special tools
No. |
Name of accessories |
Quantity |
Usage |
Remarks |
1 |
Heat shrinkable protective sleeve |
|
Protecting fiber splices |
Configuration as per capacity |
2 |
Nylon tie |
|
Fixing fiber with protective coat |
Configuration as per capacity |
3 |
Heat shrinkable fixing sleeve (single) |
|
Fixing and sealing single fiber cable |
Configuration as per requirement |
4 |
Seal tape |
|
Fixing and sealing mass of fiber cable |
Configuration as per specification |
5 |
Branching clip |
|
Branching fiber cables |
Configuration as per requirement |
6 |
Earthing wire |
1 piece |
Putting through between earthing devices |
|
7 |
Desiccant |
1 bag |
Put into FOSC before sealing for desiccating air |
|
8 |
Labeling paper |
1 piece |
Labeling fiber |
|
9 |
Special wrench |
1 pieces |
Tightening nut of reinforced core |
|
10 |
Metal hoop |
1 set |
For wall mounting and pole hugging |
|
11 |
Buffer tube |
To be decided by customers |
Hitched to fibers and fixed with FOST, managing buffer |
Configuration as per requirement |
12 |
Aluminum-foil paper |
1 piece |
Protect the bottom of FOS |
|