12 Fasern, MTP zu MTP, 9/125 Einspielermodus Faser, 12 Standard - MTP Backbone-Stammkabel
MTP ist der hohe Dichtegrad des optischen Faservorverbindungssystems, das allgemein in drei Bereichen verwendet wird.
Die Daten-Center-Anwendung mit hoher Dichte Umgebung
Die Glasfaser zum Gebäude
Die interne Steckeranwendung in Glasfasergeräten wie Splitter, 40G / 100G SFP und SFP +.
Das MTP-Glasfaser-Patchkabel von Fiber-Mart entspricht dem IEC-61754-7- und TIA-604-5-Standard (FOCIS-5). Es kann weit verbreitet sein für
10G upgrade to 40G/100G data center.
MTP-Verbindungstypen
|
|
MTP Male with Pins |
MTP Female without Pins |
Two other clearly visible features are the noses and guide grooves (keys) on the top side.(Note: Female connector need to connect with male connector type.) |
Vorkonfektionierte MTP-Technologie-Polarität
Die drei Polaritätsmethoden Typ A, Typ B und Typ C werden verwendet, um die richtige bidirektionale Zuordnung zu gewährleisten.
Montagestruktur Illustration
MTP-Trunk-Glasfaser-Patchkabel sind an beiden Enden mit MTP-Anschlüssen abgeschlossen.
1.Der Standarddurchmesser des MTP-Kabels beträgt 3,0 mm.
2. Die Standardfarbe des Single-Mode-MTP-Anschlusses ist Grün.
3.Der Durchmesser der Abzweigkabel könnte als 0,9 mm, 2,0 mm, bitte kontaktieren Sie uns bei
[email protected] für andere Durchmesser Standard.
4.Wir stützen auch kundenspezifische ziehende Augen für das Kabel, willkommen, mit mir für Details in Verbindung zu treten.
MTP & MPO Unterschied
Der Begriff MTP ist ein eingetragenes Warenzeichen von US Conec, es war der Haupttrend in europäischen und amerikanischen Gebieten.
MTP / MPO Maschinen und Prüfgeräte
1 |
Our adopt industry's leading high-performance polishing machine, and complemented by precision plates holders designed for MT ferrules. |
|
2 |
The industry leading device of 3D interferometer provides verification of MTP/MPO polishing process, the interferometer making all parameters of hte polished MT ferrule complies and exceeds industry standards. |
|
3 |
After the 3D interference detection, the flexibility of the tester provides the the complete spectrum of optical testing required for complex and high fiber count cable assemblies. |
Parameterreferenz
Type |
Single mode |
Single mode |
Multi mode |
(APC polish) |
(PC polish) |
(PC polish) |
Fiber count |
8, 12, 24 etc. |
8, 12, 24 etc. |
8, 12, 24 etc. |
Fiber type |
G652D, G657A1 etc. |
G652D, G657A1 etc. |
OM1, OM2, OM3 etc. |
Maximum Insertion Loss |
Elite |
Standard |
Elite |
Standard |
Elite |
Standard |
Low Loss |
Low Loss |
Low Loss |
≤0.35 dB |
≤0.70 dB |
≤0.35 dB |
≤0.70 dB |
≤0.35dB |
≤0.60dB |
Return Loss |
≥55 dB |
≥45 dB |
≥20 dB |
Durability |
≥200 times |
≥200 times |
≥200 times |
Operating Temperature |
-10℃ ~ +70℃ |
-10℃ ~ +70℃ |
-10℃ ~ +70℃ |
Test Wavelength |
1310nm |
1310nm |
850nm |
Note: Maximum Bandwidths of Different Multimode Fibers
OM1 – 62.5 um Core – 10GBit up to 33 meters, gigabit up to 300m
OM2 – 50 um Core – 10GBit up to 82 meters,gigabit up to 500m
OM3 – 50 um Core, Laser Optimized – 10GBit up to 300 meters,gigabit up to 1000m
OM4 – 50 um Core, Laser Optimized – 10GBit up to 550 meters,gigabit up to 1000m
Zur Bestellung machen
Fiber Type |
Cable Type |
Fiber Count |
Termination |
Cable Length |
Breakout Length (Inches) |
Breakout Termination |
Polarity |
Lableing |
OM4
OM3
OS1/2
OM2
OM1 |
LSZH Bunch
Riser Bunch
LSZH Ribbon
Riser Ribbon |
12
24
36
48
72
96
144 |
First Connector
MTP Female
MTP Male
APC MTP Female
APC MTP Male |
1~999 |
12~99
(36" is typical) |
0.9mm
(standard)
2.0mm
3.0mm |
Style A
Style B
Style C |
Standard Custom |
Second Connector
MTP Female
MTP Male
APC MTP Female
APC MTP Male |