EnglishEspañolFrançaisDeutschPortuguês日本語한국인
1X2 1310nm Polarisationserhaltender optischer Zirkulator

Press Esc key to close this popup
  • 1X2 1310nm Polarisationserhaltender optischer Zirkulator
  • 1X2 1310nm Polarisationserhaltender optischer Zirkulator
  • 1X2 1310nm Polarisationserhaltender optischer Zirkulator
  • 1X2 1310nm Polarisationserhaltender optischer Zirkulator
  • 1X2 1310nm Polarisationserhaltender optischer Zirkulator

1X2 1310nm Polarisationserhaltender optischer Zirkulator

SKU: #1875
P/N: FM-PMCIR-XS-1310-3-X
ab US$242.00

Bitte wählen Sie:










Order Today, Ship before 04/02/2024, from U.S. or HK
  • Beschreibung
  • Datenblatt
  • Tags

1X2 1310nm Polarisationserhaltender optischer Zirkulator 1M

 

Die Polarisationserhaltenden (PM) optischen Zirkulatoren von Fiber-Mart sind nicht-hin- und herbewegende, unidirektionale Drei-Port-Geräte, die in einer Vielzahl von optischen Aufbauten verwendet werden. Diese Zirkulatoren sind mit einer Mittenwellenlänge von 1064, 1310 (O-Band) oder 1550 nm (C-Band) erhältlich und arbeiten mit Licht, das in die langsame Achse eingeleitet wird.
Wählen Sie aus Versionen ohne Anschlüsse, FC / ST / SC / LC PC & APC-Anschlüsse und so weiter.
 

Eigenschaften

Niedrige Rückreflexion
Hohes Extinktionsverhältnis
Geringe Einfügedämpfung
Hohe Rückflussdämpfung
Ausgezeichnete Umweltstabilität und Zuverlässigkeit
 

Anwendungen

DWDM-System
Add-Drop-Multiplexing
Faserverstärker
Faser-Sensor
Chromatische Dispersionskompensationsgeräte
Faser-Bragg-Gitter
Polarisationserhaltendes optisches System
 

Anwendungsdiagramm

As the picture shows: The input DWDM channels are coupled into Port 1 of the device with a FBG device connected to Port 2. The single wavelength reflected from the FBG then reenters the Circulator in Port 2 and is routed accordingly to Port 3. The remaining signals pass through the FBG and exit on the top fiber.
Circulator used to drop an optical channel from a DWDM system using a Fiber Bragg Grating.
As the picture shows: A Circulator is located at both ends of the fiber. Each Circulator functions to add a signal in one direction while removing the signal in the other.
Circulator can be used to send optical signals through a single fiber in two directions.

Abmessungen


Bestellinformationen

Product Description(PMCIR) Port Type Stage Operating
Wavelength
Pigtail Type Fiber Type Connector Type Fiber Length
P=Polarization
M=Maintaining
CIR=Circulator
1X2
2X2
Dual
Single
1064nm
1310nm
1550nm
250um
900um
PM98
PM15
PM13
others
None
FC UPC/APC
LC UPC/APC
SC UPC/APC
ST UPC/APC
0.5m
0.8m
1.0m
1.2m
Custom

Note:
1. Operating Wavelength: Fiber-Mart can customize any other wavelengths according to your requirement.
2. Length: The default length for the cable is 1M, Fiber-Mart could also provide 0.5M,0.8M,1.5M, 2.0M, etc.
3. Connector: Each port of the Circulator could be with any connector such as FC/LC/SC/ST,etc. Please contact us by email to [email protected] or call at +1-205-282-9089 if you have any requirement for it.

Beispielbild





Parameter Unit Value
Type - Type A Type B
Center Wavelength nm 1310& 1550 1310 &1550 1064
Operating Wavelength Range nm ±30 ±20 ±5
Typ.Peak Isolation 23℃ dB 46 30 30
Min.Isolation at 23℃ dB 40 20 25
Typ.Insertion Loss at 23℃ dB 0.7 0.6 1.8
Max.Insertion Loss at 23℃ dB 0.9 0.8 2.1
Min.Extinction Ratio dB 22 20 20
Min.Cross Talk dB 50
Min.Return Loss dB 50
Max.Optical Power(CW) mW 300
Max.Tensile Load N 5
Fiber Type - PM Panda Fiber
Operating Temperature -5~+70
Storage Temperature -40~+85
For device with connector, IL is 0.3dB higher, RL is 5dB lower, ER is 2dB lower;
The default connector key is aligned to slow axis;


Fibermart PM Circulator Datasheet

 

 

 

Datasheet to Download



Bewertung:



Copyright © 2024 Fiber-MART.COM. All Rights Reserved. Privacy Notice. Terms of Service
Fibermart ISO9001Fibermart Secure Certificate
Produkt Tags: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Email us