EnglishEspañolFrançaisDeutschPortuguês日本語한국인
Bestellte Artikel
EOC - Ethernet über Coax Master Side Unit

Press Esc key to close this popup
  • EOC - Ethernet über Coax Master Side Unit

EOC - Ethernet über Coax Master Side Unit

SKU: #7406
P/N: sku7406
US$169.00



Order Today, Ship before 04/03/2024, from U.S. or HK
  • Beschreibung
  • Datenblatt
  • Tags

FM SKU#:SKU01600H
Model#:EOC-M- FM
MFG PART#:EOC-M- FM

EOC - Ethernet over Coax Master Side Unit

EOC solutions for broadcast and TV can make a full use of current network coaxial cable, which can decrease the cost of net-building. And the solution has advantages of easy construction, less operation and fast reconstruction. The noise in coaxial network cannot influence the system transmission quality. Low cost of terminal equipment can decrease the investment of customers.

The EOC head is high bandwidth bridge equipment from Ethernet to coaxial network. It takes charge in modulating the Slave terminal equipment (EOC series) linked with it. It is often located in the position of AMP or receiver in district. Single Master can link with 10 to 253 terminal slaves, and the concurrency can reach 128 customers. The system can adapt to Chinese current HFC, and coexist with CATV, DVB digital TV.

Functional Features

  • TV and bidirectional data can be transmitted over one coaxial cable at the same time, so it simplifies the bidirectional reconstruction of HFC network
  • Uses current broadcast and TV HFC network to provide the customers with digital TV, interactive TV and broadband service
  • Easy construction, plug-and-play, fast deployment, no need for repaving cable and interrupting persons
  • Bidirectional maximum bandwidth can be 100M; the ability of anti-noise is much higher than Cable Modem; can operate under the abominable network environment
  • Small volume, low weight, adapts to family, corridor and district construction
  • Safe and reliable, stable operation, economy and practical
  • TV port can be compliant with all the mainstream CATV equipment such as splitter, TV set and optical emitter, etc.
  • Data port can be compliant with all the Ethernet equipment such as switch, router, IP set-top box, PC and etc.
  • Embedded system, which can set all the management configuration, such as setting IP and password, through HTTP landing

Specification

System Parameter Technical Index
Standard Ethernet Standard IEEE 802.3, IEEE802.3x, IEEE802.3u
Protocol CSMA/CA, TDMA(In the Future)
Transmission Rate 200Mbps
Modulation Technology OFDM anti-noise modulation, 1024/256/128/64 QAM, DQPSK,DQPSK ROBO
Number of Customers 253 Slave terminal
MAX RF Attenuation Distance <500m(<60dB attenuation)
Frequency Range 5~35MHz
Emitting Power ≥ -50dBm
Safety 128-bit AES data encryption
QoS IEEE 802.1 Q (VLAN tagging);ToS (Type of Service);MAC Address Routing
Requirement/td> Operating Temperature: -10℃ ~ 60℃
Storage Temperature: -40℃ ~ 80℃
Relative Humidity: 5% ~ 95% (noncondensing)
and EMC Follows the standard of FCC,UL,CE,TUV,CSA
Power Supply(standard) 60V/AC(feeding);220V/AC(mains)(optional)
Consumption ≤ 10W



Add your Tags

EoC Systems |



Bewertung:



Copyright © 2024 Fiber-MART.COM. All Rights Reserved. Privacy Notice. Terms of Service
Fibermart ISO9001Fibermart Secure Certificate
Produkt Tags: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Email us