2RU 19” FM-P-OTP800-11S Packet-Optical Transport Platform with 8 Slots Available for a Mixed Insertion of System Control, OEO, OLP, TMUX Service Cards
Fiber-Mart’s Packet Optical Transport Platform 800 family(FM-P-OTP800 family) is a portfolio of Packet Optical Transport Platforms that offers
operators multi-service delivery solution for a vigorous demands of emerging consumer and business applications without additional costly
fiber optic routes.
The FM-P-OTP800 family mainly includes a series rack mounts and service cards. The rack mounts, based on the latest innovations in packet
and optical technologies, provide tremendous capacity and flexibility that enable a coexistence of different service cards (2.5G/10G OEO, OLP
and 2.5G/10G TMUX ). With a mixed configuration of different service cards, the FM-P-OTP800 family can be the core of a WDM/SDH network
for the extension of transmission distance and management of whole systems .
This model FM-P-OTP800-11S is a 19-inch 2U rack mount design with eight slots, including slot 1 for a system control card; slot 2 to slot 7
for service cards; slot 9 and slot 10 only for housing power supply cards; slot 11 only for housing the fan card. It supports a single redundant
power supply (AC/DC optional).
Key Features
-
High-compact P-OTP optimized for deployment as an optical transport-only platform
-
Supports a mixed and hot-swap insertion of OEO, OLP, 2.5G/10G TMUX service cards.
-
Supports wavelength conversion or optical power amplification of 56 2.5G ports and 28 10G ports in full configuration.
-
Simplify end-to-end service deployment and orchestration across multi-vendor, multi-domain networks.
-
Supports the service flexibility required in today’s rapidly evolving networks.
-
Supports unidirectional transmission over one single fiber, bidirectional transmission over one single fiber or over two fibers etc.
Application
-
WDM systems
-
Sonnet/SDH systems
-
High-speed transmission systems
Rack Mount Specification
Parameter |
FM-P-OTP800-2S |
FM-P-OTP800-4S |
FM-P-OTP800-11S |
Dimensions
(Width x Depth x Height) |
Standard 1U Rack Mount
(442mmx220mmx44mm) |
Standard 1U Rack Mount
(442mmx220mmx44mm) |
Standard 2U Rack Mount
(442mmx220mmx88mm) |
Weight
(Empty Chassis) |
2.6 kg |
2.6 kg |
3..6 kg |
Power Consumption
(Maxi.) |
20W |
50W |
100W |
Rated Current |
0.2A |
0.4A |
1A |
Power Supply |
built-in AC220/DC48V(optional) |
built-in AC220/DC48V(optional) |
built-in AC220/DC48V(optional) |
Slots Note 1 |
2 slots |
4 slots |
11 slots |
Fans |
2-built-in fans |
1 pluggable fan |
Relative Humidity
(Non- condensation) |
-10℃~50℃ |
Storage Temperature |
-40℃~85℃ |
Relative Humidity
(Non-condensation) |
5%~95%℃ |
MTBF |
140127 hours |
Notes:
1. For FM-P-OTP-11S, Slot 9 and Slot 10 are fixed to house the power supply cards; Slot 11 is fixed to house a pluggable fan card.
2. Fiber-Mart provides freely customized rack mounts in accordance with your special requirements. You can email [email protected] or call us at +1-86-2786-1199 for detailed drawing.
FM-P-OTP800 Service Cards Series
Categories |
Part NO. |
Description |
System Control Card |
FM-P-OTP800 |
2x100Mbit/s Ethernet ports and 2xSFP module slots |
OEO card |
FM-P-OTP800-OEO(2G5) |
8x42M/622M/1.25G/2.5GE Wavelength Conversion Board |
FM-P-OTP800-OEO(10G) |
4x10 Gbit/s Wavelength Conversion Board |
CWDM DWDM TMUX Card |
FM-P-OTP800-TMUX (10G) |
8x1.25GE services converged to 1x10G link |
FM-P-OTP800-TMUX (2G5) |
4x1.25GE services converged to 2x2.5G link with 1+1 protection |
Optical Line Protection Card |
FM-OBP-C |
1:1, 1+1, 1-1 node protection |
Warm Tips:
1. The specification may be slightly changed without notice
2. Fiber-Mart offers Customize Service Cards for any signals that you need to transport. For more details, please email [email protected] or call us at +1-86-2786-1199.
FM-P-OTP800-11S Platform for Diverse Service Cards
Mechanical Figure of FM-P-OTP800-11S Front Panel
Attention:
1. All the service cards must be installed horizontally in FM-P-OTP800-11S transport platforms.
2. System control card must be installed in slot 1 of FM-P-OTP800-11S.
Typical Application Case
Solution details: 120KM Transmission without any relay stations
The application figure shows the 12 channels of 10G optical signals can be transmitted as unidirectional up to 120km distance through a single standard optical fiber.
1. In location A, standard wavelengths of 12 channels of 10G optical signals are converted into DWDM wavelengths by three FM-P-OTP800-OEO(10G) cards in a FM-P-OTP800-11S platform.
2. Then, 12 channels of 10G DWDM optical signals are multiplexed to a standard single-mode optical fiber by connecting to a DWDM MUX(XMS-1RU-1-FMDWDM)
3. After the 12 channels of optical signals reach Location B, a pre-amplifier ( DWDM-EDFA-PA-XX) will be used to amplify optical power and a DCM( FM-DCM-XX) will be used to compensate the dispersion.
4. The 12 channels of DWDM optical signals will be de-multiplexed by a DWDM DEMUX(XDS-1RU-1-FMDWDM)
5. 12 channels wavelengths of 10G DWDM optical signals are converted to standard wavelengths by three FM-P-OTP800-OEO(10G) cards and received respectively by end devices.
Warm Tips:
a. The above scheme just shows the transmission of one-way data.
b. A system control card (FM-P-OTP800-SC) must be installed in the slot 1 and a optical protection card (FM-OEO800-OLP-1+1) in the slot 2 of FM-P-OTP800-4S platform to manage and protect the whole system.
c. "X" in XMS-RU-1-FMDWDM and XDS-RU-1-FMDWDM means the number of channels; "XX" in DWDM-EDFA-PA-XX indicates the gain value; "XX" in FM-DCM-XX refers to the physical compensation distance.
Rack Mount Specification
Parameter |
FM-P-OTP800-2S |
FM-P-OTP800-4S |
FM-P-OTP800-11S |
Dimensions
(Width x Depth x Height) |
Standard 1U Rack Mount
(442mmx220mmx44mm) |
Standard 1U Rack Mount
(442mmx220mmx44mm) |
Standard 2U Rack Mount
(442mmx220mmx88mm) |
Weight
(Empty Chassis) |
2.6 kg |
2.6 kg |
3..6 kg |
Power Consumption
(Maxi.) |
20W |
50W |
100W |
Rated Current |
0.2A |
0.4A |
1A |
Power Supply |
built-in DC48V/220V (optional) |
built-in DC48V/220V (optional) |
AC220/DC48V 1+1 redundant power |
Slots |
2 slots |
4 slots |
11 slots |
Fans |
2-built-in fans |
1 pluggable fan |
Relative Humidity
(Non- condensation) |
-10℃~50℃ |
Storage Temperature |
-40℃~85℃ |
Relative Humidity
(Non-condensation) |
5%~95%℃ |
MTBF |
140127 hours |
Notes:
1. Fan Board is only for FM-P-OTP800-11S
2. Fiber-Mart provides freely customized rack mounts in accordance with your special requirements. You can email [email protected] or call us at +1-86-2786-1199 for detailed drawing.