EnglishEspañolFrançaisDeutschPortuguês日本語한국인
Fujikura FSM-80S Kernausrichtung  LWL-Spleißgerät

Press Esc key to close this popup
  • Fujikura FSM-80S Kernausrichtung  LWL-Spleißgerät

Fujikura FSM-80S Kernausrichtung LWL-Spleißgerät

SKU: #9064
P/N: FMM-80S
US$8,500.00



Order Today, Ship before 04/02/2024, from U.S. or HK
  • Beschreibung
  • Datenblatt
  • Tags

Fujikura FSM-80S Fusionsspleißgerät mit Kernausrichtung

 

Beschreibung

Der FMM-80S ist ein Single-Fiber-Spleißgerät mit Kern-zu-Kern-Ausrichtung, das zum Spleißen von Single-Count-Lichtwellenleitern für die Telekommunikation entwickelt wurde. Stoßfestigkeit, Staubbeständigkeit und Regenbeständigkeit....


Besonderheit

Der FMM-80S ist ein Einzelfaser-Spleißgerät mit Kern-zu-Kern-Ausrichtung, das dem FMM-60S nachfolgt. Neben dem robusten Konzept, das 60S geschaffen hat, bietet das 80S eine Reihe neuer Funktionen, wie "Automatischer Windschutz und Rohrheizer" für schnellere Spleißzyklen sowie weniger Arbeitsschritte, "innovatives Kofferdesign" für
schnellere Vorbereitung, "leistungsstarker Li-Ionen-Akku" für längeren Betrieb, hochauflösender größerer LCD-Monitor und "eingebaute Bedienungsanleitungen" in verschiedenen Sprachen. Der Markt reicht von der Installation von Backbone-Netzwerken bis hin zur Herstellung von optoelektronischen Komponenten für hochwertige Spleißvorgänge.


Spezifikationen

Diese Funktionen maximieren die Produktivität und Bedienbarkeit beim Spleißen vor Ort.
Automatisierter Windschutz/Rohrheizung
Reduzierte Spleißschritte und die schnellsten Spleiß-/Heizzeiten der Welt.
Innovatives Tragetaschen-Design
Im Inneren befindet sich ein abnehmbarer integrierter Arbeitstisch für einen schnellen Beginn des Spleißens
Umweltbeständigkeit
Der weltweit erste 6-Richtungs-Sturzschutz, staub- und wasserabweisend.
Breitbild-LCD-Monitor
Hochauflösender 4,7 Zoll Monitor mit besserer Sichtbarkeit bei Tageslicht.
Leistungsstarker Lithium-Ionen-Akku
200 Spleiß- und Heizzyklen pro Vollladung.
Vorinstalliertes Handbuch
Handbücher mit Bedienung, Fehlerbehebung und anderen sind erhältlich über
der Monitor.


Bestellinformationen
 

Applicable fibres SM (ITU-T G.652 & G.657), MM (ITU-T G.651),DS (ITU-T G.653), NZDS (ITU-T G.655),Others
Fibre Count Single
Cladding diameter 80 to 150μm
Coating diameter 100 to 1000μm
Fibre cleaved length 5 to 16mm using Sheath Clamp A, B or 5 to13mm using FH-60-250, FH-60-900
Actual average splice loss 0.02dB with SM, 0.01dB with MM, 0.04dB with DS, 0.04dB with NZDS
Splice time 7sec:SM FAST mode, 12sec :SM AUTO mode, 15sec:AUTO mode
Return loss 60dB or greater
Splicing modes 100 splicer modes are available
Splice loss estimate Several types of core deformations as well as core axis offset are taken into account for accurate loss estimate
Attenuation splice function Intentional high splice loss of 0.1dB to 15dB (0.01dB step) can be made for an inline fixed attenuator
Storage of splice result The last 2000 results to be stored in the internal memory
Magnification X /Y (300X magnification), or both X and Y simultaneously (160X magnification)
Viewing method By two CMOS cameras for intersecting fiber viewing and 4.73 inches TFT colour LCD monitor
Tension test 1.96 to 2.25N
Operating condition 0-5000m above sea level, 0-95% RH and -10 to 50°C respectively
Tube heater Built-in auto-start tube heater with 10 heating modes and up to 20 for reference
Tube heat time 13-15sec. with FP-03 protection sleeve. Total memory of 30 heating modes are available
Applicable protection sleeve length 60mm, 40mm and a series of micro sleeves
No. of splice/heating with battery 200 times of splicing and heat shrinking under with BTR-09
Power supply Auto voltage selection from 100 to 240Va.c. or 10 to 15Vd.c. with ADC-18. 14.8Vd.c. with BTR-09
Terminals USB2.0 ( Mini-B) for data and video signal transfer to PC
Wind protection Up to 15m/s wind velocity
Dimensions

146(W) x 159(D) x 150(H) mm
Including wind protector, monitor, and rubber protector
Excluding rubber foot

Weight 2.5 kg, with ADC-18 AC adaptor
2.7 kg, with BTR-09 battery
Electrode life 3000 arc-discharges


Einzelheiten


Standardpaket
 

Item Description Model No. Qty
1 Fusion Splicer FMM-80S with CLAMP-S70A 1 pc
2 AC adaptor/battery charger ADC-18 1 pc
3 AC power cord ACC-XX 1 pc
4 Spare Electrodes ELCT2-20A 1 pair
5 Cleaver CT-30A 1 pc
6 Battery Pack BTR-09 1 pc
7 USB cable USB-01 1 pc
8 Quick reference guide M-80S/19S-E 1 pc
9 Warning and cautions W-70-E 1 pc
10 Instruction Manual M-70 1 pc
11 Alcohol Pot AP-01 1 pc
12 Battery charge cord DCC-18 1 pc
13 Carrying Case CC-30 1 pc
14 Screw Driver SD-01 1 pc


Extras

Description Model No. Note
Fiber holder FH-60-250 For 250um coating
FH-60-900 For 900um coating
FH-60-LT900 For 900um Loose Tube Fiber
FH-60-DC250 For Drop Cable
FH-60-IDC250 For Indoor Cable
FH-FC-20/30 For 2mm/3mm cord
Sheath clamp CLAMP-S70A Coating diameter from 100um to 1000um
(5mm to 16mm cleave)
Included in standard package
CLAMP-S70B 900um diameter loose tube fiber (16mm cleave)
DC power cord DCC-12 For ADC-11/ADC-13/ADC-18
Cigarette lighter socket type
DCC-12 For ADC-11/ADC-13/ADC-18, Alligator clamp type
Primary Coat Stripper PS-02 For single 250um fiber
Hot Jacket Stripper HJS-02 Standard

 


Datasheet to Download



Bewertung:



Copyright © 2024 Fiber-MART.COM. All Rights Reserved. Privacy Notice. Terms of Service
Fibermart ISO9001Fibermart Secure Certificate
Produkt Tags: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Email us