Cisco QSFP-100G-PSM4-S Compatible 100GBASE-PSM4 QSFP28 Optical Transceiver Module (SMF, 1310nm, 500m, MTP/MPO, DOM)
The Cisco QSFP-100G-PSM4-S Compatible QSFP28 Optical Transceiver Module is designed for use in 100GBASE Ethernet throughput up to 500m over single mode fiber (SMF) using a wavelength of 1310nm via a MTP/MPO-12 connector. This transceiver is compliant with IEEE 802.3bm 100GBASE-PSM4 standard. Digital diagnostics functions are also available via the I2C interface, as specified by the QSFP28 MSA, to allow access to real-time operating parameters. With these features, this easy to install, hot swappable transceiver is suitable to be used in various applications, such as data centers, high-performance computing networks,enterprise core and distribution layer applications.
Product Specification
Cisco Compatible |
QSFP-100G-PSM4-S |
Vendor Name |
Fibermart |
Form Factor |
QSFP28 |
Max Data Rate |
103.125Gbps (4x 25.78Gbps) |
Wavelength |
1310nm |
Max Cable Distance |
500m |
Connector |
MTP/MPO-12 |
Cable Type |
SMF |
Transmitter Type |
4x DFB |
Receiver Type |
PIN |
DDM/DOM |
Supported |
Commercial Temperature Range |
0 to 70°C (32 to 158°F) |
TX Power |
-9.4~2dBm |
Receiver Sensitivity |
<-12.66dBm |
Powerbudget |
3.2dB |
Receiver Overload |
2dBm |
Power Consumption |
≤3.5W |
Extinction Ratio |
>3.5dB |
Modulation Format |
NRZ |
CDR (Clock and Data Recovery) |
TX & RX Built-in CDR |
Packaging Technology |
COB (chip on board) Packaging |
Host FEC |
Supported |
EMC (Electro Magnetic Compatibility) |
Supported |
Bit Error Ratio (BER) |
1E-12 |
Protocols |
QSFP28 MSA Compliant |
Transmit and Dispersion Penalty |
2.9dB |
Application |
100GBASE Ethernet, Data Center |
Warranty |
5 Years |
Datasheet
Product Spotlights
-
-
High Performance and Reliability
≤3.5W low power consumption
Dual CDR (TX and RX)
Stainless steel material, anti-corrosion, and salt spray resistance
-
-
Wide Application
Fully compatible with almost all Cisco devices
Widely used on 100G switches, routers, servers, NICs and other transmission equipment
Suitable for data center, high-performance computing networks, etc.
-
-
Protocols and Safety Standards
IEC60825-1 Class 1 laser safety compliant
UL 94 V-0 Flammability Rating
Class B EMC, IEC 61000-4-2 Anti Electro-Static Discharge and IEC61000-4-3 Radiation Resistant
Compliant with QSFP28 MSA, IEEE 802.3bm 100GBASE-PSM4 standard
Quality Testing Program
Take a look at our optics test program and see what truly sets us apart.
Quality Certifications
Please Note: Installing a third party transceiver does not void your network equipment warranty. Network equipment manufacturers all have guidelines stating that warranty support on their products will not be affected.