Caja de empalme de fibra óptica horizontal serie FM034 de 12 fibras 2 en 2 salidas
Descripción
Los cierres de empalme de fibra óptica horizontales (en línea) están hechos de excelentes plásticos de ingeniería. Fiber-Mart suministra diferentes tipos de puertos, accesorios y diferentes números de núcleo de fibra óptica para cierres de empalme de fibra óptica horizontal.
El cierre de empalme de Fiber-Mart es adecuado para proteger empalmes de fibra óptica en aplicaciones directas y ramificadas, y se puede usar en proyectos de cables de fibra óptica aéreos, de conductos y directamente enterrados.
Características clave
Adecuado para fibra ordinaria y fibra de cinta.
Completamente equipado con todas las piezas para una operación conveniente.
Estructura superpuesta en bandeja de empalme para una fácil instalación.
Radio de flexión de fibra garantizado más de 40 mm.
Fácil de instalar y volver a ingresar con una llave común para latas.
Excelente tipo de apertura de tornillo antirremovible para proteger la fibra y el empalme asegurando la durabilidad.
Resiste condiciones severas de humedad, vibración y temperaturas extremas.
Parámetros técnicos principales
Item |
FM-F034 |
Cable ports |
4 Entires(2 on each side) |
Number of fiber fusion |
12 (bunchy) |
Splice tray cores |
24 (bunchy) |
Number of splice trays(max) |
8 |
Dimension (mm) |
655x215x185 |
Cable diameter(mm) |
Ф10~Ф22 |
Max capacity of fiber |
192 (bunchy) |
Working temperature |
-40℃~65℃ |
Insulation resistance |
>2×104MΩ |
Opening Type |
Anti-removable Screw-Type |
Installation Type |
Aerial |
Sealing structure |
Sticky cincture |
Notas: La instalación de la antena es predeterminada en Fiber-Mart, la otra también se puede personalizar de acuerdo con sus requisitos, comuníquese con [email protected] para obtener más detalles.
Solicitud
Ser adecuado para aplicaciones aéreas, de conductos y directamente enterradas.
Entorno CATV, Telecomunicaciones, Entornos locales del Cliente, Redes Carrier y redes de fibra óptica.
Cierre de empalme óptico horizontal (en línea)
Componentes principales
No. |
Name of components |
Quantity |
Usage |
Remarks |
1 |
Housing |
1 set |
Protecting fiber cable splices in whole |
|
2 |
Insert plate |
2 pairs |
Fixing the housing |
175x56x30(mm) |
3 |
Fiber optic splice tray (FOST) |
Max 8 trays(bunchy) |
Fixing heat shrinkable protective sleeve and holding fibers |
Suitable for: Bunchy:12,24,36,48,72,96,144,192(cores) |
4 |
Foundation |
1 set |
Fixing fiber cable, reinforced core and FOST |
|
5 |
Seal fitting |
1 set |
Sealing between FOSC cover and FOSC bottom |
|
6 |
Port plug |
6pieces |
Sealing empty ports |
|
7 |
Pressure testing valve |
1 set |
After injecting air, it is used for pressure testing and sealing testing |
Configuration as per requirement |
8 |
Earthing deriving device |
1 set |
Deriving metallic parts of fiber cable in FOSC for earthing connection |
Configuration as per requirement |
Accesorios opcionales y herramientas especiales
No. |
Name of accessories |
Quantity |
Usage |
Remarks |
1 |
Heat shrinkable protective sleeve |
|
Protecting fiber splices |
Configuration as per capacity |
2 |
Nylon tie |
|
Fixing fiber with protective coat |
Configuration as per capacity |
3 |
Insulation tape |
1 roll |
Enlarging diameter of fiber cable for easy fixing |
|
4 |
Seal tape |
1 roll |
Enlarging diameter of fiber cable which fits in with seal fitting |
Configuration as per specification |
5 |
Hanging hook |
1 set |
For aerial use |
|
6 |
Earthing wire |
1 piece |
Putting through between earthing devices |
To put through as per actual requirement |
7 |
Abrasive cloth |
1 piece |
Scratching fiber cable |
|
8 |
Labeling paper |
1 piece |
Labeling fiber |
|
9 |
Special wrench |
3 pieces |
Fixing bolts, tightening nut of reinforced core |
|
10 |
Measuring paper |
1 piece |
To measure perimeter of fiber cable, of which the diameter is enlarged with seal tape |
To measure perimeter with the corresponding measuring paper |
11 |
Buffer tube |
To be decided by customers |
Hitched to fibers and fixed with FOST, managing buffer |
Configuration as per requirement |
12 |
Desiccant |
1 bag |
Put into FOSC before sealing for desiccating air. |
|
Nota: Este precio no incluye los accesorios y herramientas opcionales, si los necesita, contáctenos en [email protected] para obtener más detalles.