Polarización 1X2 1310nm Mantenimiento del circulador óptico 1M
Los circuladores ópticos de mantenimiento y polarización (PM) de Fiber-Mart son dispositivos unidireccionales y de tres puertos no recíprocos que se utilizan en una amplia gama de configuraciones ópticas. Disponible con una longitud de onda central de 1064, 1310 (banda O) o 1550 nm (banda C), estos circuladores están diseñados para funcionar con luz que se inicia en el eje lento.
Elija entre versiones sin conectores, conectores FC / ST / SC / LC para PC y APC, etc.
Características
Reflexión de espalda baja
Alta relación de extinción
Baja pérdida de inserción
Pérdida de alto retorno
Excelente estabilidad y confiabilidad ambiental
Aplicaciones
Sistema DWDM
Multiplexación por adición y extracción
Amplificador de fibra
Sensor de fibra
Dispositivos de Compensación de Dispersión Cromática
Fibra Bragg Grating
Polarización manteniendo el sistema óptico
Diagrama de aplicación
|
As the picture shows: The input DWDM channels are coupled into Port 1 of the device with a FBG device connected to Port 2. The single wavelength reflected from the FBG then reenters the Circulator in Port 2 and is routed accordingly to Port 3. The remaining signals pass through the FBG and exit on the top fiber. |
El circulador solía soltar un canal óptico desde un sistema DWDM usando una Fiber Bragg Grating.
|
|
As the picture shows: A Circulator is located at both ends of the fiber. Each Circulator functions to add a signal in one direction while removing the signal in the other. |
El circulador se puede usar para enviar señales ópticas a través de una única fibra en dos direcciones. |
Dimensión
información del pedido
Product Description(PMCIR) |
Port Type |
Stage |
Operating
Wavelength |
Pigtail Type |
Fiber Type |
Connector Type |
Fiber Length |
P=Polarization
M=Maintaining
CIR=Circulator |
1X2
2X2 |
Dual
Single |
1064nm
1310nm
1550nm |
250um
900um |
PM98
PM15
PM13
others |
None
FC UPC/APC
LC UPC/APC
SC UPC/APC
ST UPC/APC |
0.5m
0.8m
1.0m
1.2m
Custom |
Nota:
1. Longitud de onda de funcionamiento: Fiber-Mart puede personalizar cualquier otra longitud de onda de acuerdo con sus necesidades.
2. Longitud: la longitud predeterminada para el cable es 1M, Fiber-Mart también podría proporcionar 0.5M, 0.8M, 1.5M, 2.0M, etc.
3. Conector: cada puerto del circulador podría estar con cualquier conector como FC / LC / SC / ST, etc. Póngase en contacto con nosotros por correo electrónico a [email protected] o llame al +1-205-282-9089 si tiene algún requisito para ello.
Imagen de muestra
Parameter |
Unit |
Value |
Type |
- |
Type A |
Type B |
Center Wavelength |
nm |
1310& 1550 |
1310 &1550 |
1064 |
Operating Wavelength Range |
nm |
±30 |
±20 |
±5 |
Typ.Peak Isolation 23℃ |
dB |
46 |
30 |
30 |
Min.Isolation at 23℃ |
dB |
40 |
20 |
25 |
Typ.Insertion Loss at 23℃ |
dB |
0.7 |
0.6 |
1.8 |
Max.Insertion Loss at 23℃ |
dB |
0.9 |
0.8 |
2.1 |
Min.Extinction Ratio |
dB |
22 |
20 |
20 |
Min.Cross Talk |
dB |
50 |
Min.Return Loss |
dB |
50 |
Max.Optical Power(CW) |
mW |
300 |
Max.Tensile Load |
N |
5 |
Fiber Type |
- |
PM Panda Fiber |
Operating Temperature |
℃ |
-5~+70 |
Storage Temperature |
℃ |
-40~+85 |
For device with connector, IL is 0.3dB higher, RL is 5dB lower, ER is 2dB lower; |
The default connector key is aligned to slow axis; |