EnglishEspañolFrançaisDeutschPortuguês日本語한국인
Ethernet POE Switch with 24 100M ports and 4 gigabit ports

Press Esc key to close this popup
  • Ethernet POE Switch with 24 100M ports and 4 gigabit ports

Ethernet POE Switch with 24 100M ports and 4 gigabit ports

SKU: #7410
P/N: FM-2024SMP
US$510.25



Order Today, Ship before 04/03/2024, from U.S. or HK
  • Detalles
  • Ficha datos
  • Tags

FM SKU#:SKU00036L1
Model#:FM-2024SMP
MFG PART#:

Fast Ethernet POE switch Series

FM 2000 switch series is a new generation of L2 switches with high performance, multiservice, high reliability and high security that are independently developed by FM. They support all kinds of connections varying from 10/100M to 1000M, so the network can be configured flexibly according to actual needs. The switches can access all Ethernet or fast-Ethernet devices, so they can be very compatible with the existing devices.

Properties
Excellent performance

  • 32Gbps backplane bandwidth, hardware forwarding and wire-speed L2 packet forwarding rate
  • Gigabit optical-fiber transmission with up to 80Km distance and directly connecting the MAN backbone network

High security and reliability

  • Providing multiple user authentication modes such as 802.1x authentication
  • Powerful ACL and hardware supporting L2 to L7 data filtration

Port-MAC-IP bind
Special ARP invasion detection to effectively stop ARP cheat

  • Hardware IPv6 ACL

Flexible and various management modes

  • Automatically identifying the straight-through cable and the intercrossed cable
  • Adopting the cluster technology; supporting device cascading; managing uniquely through a unique IP address; saving address resources
  • Multiple management modes such as Console port, Telnet, Web and SNMP are supported

Powerful flow and broadcast management

  • Detecting and limiting broadcast storms automatically and supporting IGMP snooping to limit broadcast flooding
  • Supporting flow control in full-duplex mode or half-duplex mode
  • The rate limitation in a minimum step of 64K is supported on the Ethernet interface
  • Supporting IP multicast and QoS
  • Flexible QinQ realizes the QinQ function based on the five-element group

Varied protocols

  • POE switches support 802.3af power supply on all their ports.
  • POE switches already support 802.3at power supply. The maximum power supply on each port can reach up to 30W.
  • POE switches support the configuration of power-supply priority, guaranteeing continuous power supply at those key network nodes.
  • The POE switches support configuring the power consumption of power supply on their ports, saving the power and reducing users’ cost.



Technical Indexes

  2008SMP 2016SMP 2024SMP
Standard configuration 8 10/100M RJ-45 MDI/MDI-X auto-adaptable interfaces 16 10/100M RJ-45 MDI/MDI-X auto-adaptable interfaces 24 10/100M auto-adaptable electric ports
2 gigabit optical/electrical ports 2 gigabit optical/electrical ports 4 gigabit optical/electrical ports
One Console port One Console port One Console port
Processor RISC 200MHz
Flash 8MB
Memory 32MB
Forwarding rate 8.3Mpps 10.7Mpps 19.1Mpps
Backplane bandwidth 32Gbps
Switching mode Store forwarding
Address table 8K
Queue buffer 64MB
Size 340*200*44mm 442*315*44mm 442*315*44mm
Power source’s characteristics 110-240VAC (auto-adaptable), 47-63Hz, 1A/230V
Supporting POE power supply or supporting POE plus power supply
Power consumption 2008SMP:Up to 170W (including POE power supply) and supporting the 802.3af power supply on 8 ports or the 802.3at power supply on 5 ports;
2016SMP: Up to 400W (including POE power supply) and supporting the 802.3af power supply on 16 ports or the 802.3at power supply on 12 ports;
2024SMP: Up to 400W (including POE power supply) and supporting the 802.3af power supply on 24 ports or the 802.3at power supply on 12 ports;
Indicator Power indicator, system indicator, connection/data forwarding indicator, 10/100M indicator
Temperature and humidity Working temperature: 0-50℃
Storage temperature: -40-70℃
Humidity: 0-90% no condensation
STP IEEE 802.1D STP
IEEE 802.1w RSTP
IEEE 802.1S MSTP
VLAN Supporting port-based VLAN
802.1Q-tagged VLAN
QinQ, flexible QinQ
Private Vlan
Dynamic VLAN configuration through GVRP
Flow control Backpressure is adopted for half-duplex, while IEEE802.3x is adopted for full-duplex.
CAR is supported; a 64K step limitation is conducted to the 100M port, and a 8M step limitation is conducted to the gigabit port.
Broadcast control The broadcast storm is constrained. When the threshold value for controlling the broadcast storm is reached, the broadcast packets are stopped from being forwarded.
Multicast control IGMP Snooping of multicast packets, IGMP v1/v2/v3
Interface binding Each port binding group contains up to 8 ports, and 6 port binding groups are supported meanwhile.
Dynamic LACP or static aggregation is supported.
Port Mirror Supporting flow-based mirroring and the or port
Cascading Stacking 32 switches
Adopting the cluster technology; managing uniquely through a unique IP address; saving address resources
Security features IEEE 802.1x port authentication
Port security
Supporting IP ACL, MAC ACL and Vlan ACL on hardware
Supporting dhcp snooping on the hardware
Supporting DAI and static/dynamic ARP prevention on the hardware
Supporting user authentication through Web page
Supporting remote RADIUS and “TACACS+authentication”
Supporting hierarchical user management and password protection
QoS Head Of Line (HOL) mechanism
Four transmission queues on each port are mapped to eight priority values of 802.1p.
WRED, WFQ, SP and FIFO
Best-effort service
Differentiated service
Strict priority
Weighted round robin
First come first served
TOS re-labeling
RTS
Network management SNMP v1/v2
RMON (groups 1, 2, 3, 9)
Telnet
CLI window
WEB page
Supporting NTP
Supporting SSH
Supporting PDP (compatible with Cisco CDP)



Ordering Information

2008SMP Enhanced full-managed Ethernet switch with 8 100M ports and 2 gigabit ports (1 console port, 8 10/100M electric ports, 2 gigabit TX/SFP ports, AC power supply, POE power supply)
2016SMP Enhanced full-managed Ethernet switch with 16 100M ports and 2 gigabit ports (1 console port, 16 10/100M electric ports, 2 gigabit TX/SFP ports, AC power supply, POE power supply)
2024SMP Ethernet switch with 24 100M ports and 4 gigabit ports (1 console port, 24 10/100M electric ports, 4 gigabit TX/SFP ports, AC power supply, POE power supply)

  2008SMP 2016SMP 2024SMP
Standard configuration 8 10/100M RJ-45 MDI/MDI-X auto-adaptable interfaces 16 10/100M RJ-45 MDI/MDI-X auto-adaptable interfaces 24 10/100M auto-adaptable electric ports
2 gigabit optical/electrical ports 2 gigabit optical/electrical ports 4 gigabit optical/electrical ports
One Console port One Console port One Console port
Processor RISC 200MHz
Flash 8MB
Memory 32MB
Forwarding rate 8.3Mpps 10.7Mpps 19.1Mpps
Backplane bandwidth 32Gbps
Switching mode Store forwarding
Address table 8K
Queue buffer 64MB
Size 340*200*44mm 442*315*44mm 442*315*44mm
Power source’s characteristics 110-240VAC (auto-adaptable), 47-63Hz, 1A/230V
Supporting POE power supply or supporting POE plus power supply
Power consumption 2008SMP:Up to 170W (including POE power supply) and supporting the 802.3af power supply on 8 ports or the 802.3at power supply on 5 ports;
2016SMP: Up to 400W (including POE power supply) and supporting the 802.3af power supply on 16 ports or the 802.3at power supply on 12 ports;
2024SMP: Up to 400W (including POE power supply) and supporting the 802.3af power supply on 24 ports or the 802.3at power supply on 12 ports;
Indicator Power indicator, system indicator, connection/data forwarding indicator, 10/100M indicator
Temperature and humidity Working temperature: 0-50℃
Storage temperature: -40-70℃
Humidity: 0-90% no condensation
STP IEEE 802.1D STP
IEEE 802.1w RSTP
IEEE 802.1S MSTP
VLAN Supporting port-based VLAN
802.1Q-tagged VLAN
QinQ, flexible QinQ
Private Vlan
Dynamic VLAN configuration through GVRP
Flow control Backpressure is adopted for half-duplex, while IEEE802.3x is adopted for full-duplex.
CAR is supported; a 64K step limitation is conducted to the 100M port, and a 8M step limitation is conducted to the gigabit port.
Broadcast control The broadcast storm is constrained. When the threshold value for controlling the broadcast storm is reached, the broadcast packets are stopped from being forwarded.
Multicast control IGMP Snooping of multicast packets, IGMP v1/v2/v3
Interface binding Each port binding group contains up to 8 ports, and 6 port binding groups are supported meanwhile.
Dynamic LACP or static aggregation is supported.
Port Mirror Supporting flow-based mirroring and the or port
Cascading Stacking 32 switches
Adopting the cluster technology; managing uniquely through a unique IP address; saving address resources
Security features IEEE 802.1x port authentication
Port security
Supporting IP ACL, MAC ACL and Vlan ACL on hardware
Supporting dhcp snooping on the hardware
Supporting DAI and static/dynamic ARP prevention on the hardware
Supporting user authentication through Web page
Supporting remote RADIUS and “TACACS+authentication”
Supporting hierarchical user management and password protection
QoS Head Of Line (HOL) mechanism
Four transmission queues on each port are mapped to eight priority values of 802.1p.
WRED, WFQ, SP and FIFO
Best-effort service
Differentiated service
Strict priority
Weighted round robin
First come first served
TOS re-labeling
RTS
Network management SNMP v1/v2
RMON (groups 1, 2, 3, 9)
Telnet
CLI window
WEB page
Supporting NTP
Supporting SSH
Supporting PDP (compatible with Cisco CDP)


Datasheet to Download

Add your Tags

Gigabit Switch |



Calificación:



Derechos © 2024 Fiber-MART.COM. All Rights Reserved. Privacy Notice. Terms of Service
Fibermart ISO9001Fibermart Secure Certificate
Etiquetas de productos: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Email us