96 Fibers Single Mode 24 Strands MTP Harness Cable 3.0mm LSZH/Riser
MTP is the high dense degree of optical fiber pre-connect system,which is generally use in three areas:The Data Center application with high dense degree environmentThe optical fiber to the buildingThe internal connector application in fiber equipment.
Fiber-MART's MTP fiber patch cable is compliant to IEC-61754-7 and TIA-604-5(FOCIS-5)standard.It can be widely used for
10G upgrade to 40G/100G data center.
MTP Connector
 |
 |
|
MTP Male with Pins |
MTP Female without Pins |
|
Two other clearly visible features are the noses and guide grooves(keys)on the top side.The Female and Male need to be used together. |
Pre-terminated MTP Technology-Polarity Type B(Cross)
The application above is for the MTP-LC harness cable connecting a QSFP+port to(4)SFP+ports directly.
In many existing DC environments,LC-MTP cables are used to support high density fiber trunks between switches,rack patch panels and main distribution cabling panels(MDA).
For example:
The above is the Eight-Fiber MTP-LC Assembly uses a pinless connector on one end for interfacing with the QSFP port on the Cisco Nexus 6000series,The other end contains four LC uniboot connectors,which provide connectivity to the SFP+ports on the switch.The polarity of the assembly pairs the fibers from the MTP Connector from the outside to the inside;thus,fiber 1 and fiber 12 are a duplex pair,as are fiber 2 and fiber 11,etc.
MTP&MPO Difference
The term MTP is a registered trademark of US Conec,which have became the tendency inEurope&Americanfiber communications areas at present.
Assembly Structure Illustration
12-Fiber Mini-Core Cable structure
MTP Hybrid Harnesses Fiber Patch Cables are terminated with MTP connector on one end and other end with LC,FC,SC,ST,or MTRJ connectors to meet a variety of fiber cabling requirements.
1.The default diameter of the MTP cable is 3.0mm.
2.The diameter of branch cable could be choose as 0.9mm,2.0mm,please kindly contact us at [email protected] for other diameter standard.
3.Fiber-MART can also custom the pulling eyes,welcome to contact us if you need.
MTP/MPO Machinery&Testing Equipment
|
1 |
Our adopt industry's leading high-performance polishing machine,and complemented by precision plates holders designed for MT ferrules. |
|
|
|
2 |
The industry leading device of 3D interferometer provides verification of MTP/MPO polishing process,the interferometer making all parameters of hte polished MT ferrule complies and exceeds industry standards. |
|
|
|
3 |
After the 3D interference detection,the flexibility of the tester provides the the complete spectrum of optical testing required for complex and high fiber count cable assemblies. |
MTP Termination
|
Type |
Single mode |
Single mode |
Multi mode |
|
(APC polish) |
(PC polish) |
(PC polish) |
|
Fiber count |
8, 12, 24 etc. |
8, 12, 24 etc. |
8, 12, 24 etc. |
|
Fiber type |
G652D, G657A1 etc. |
G652D, G657A1 etc. |
OM1, OM2, OM3 etc. |
|
Maximum Insertion Loss |
Elite |
Standard |
Elite |
Standard |
Elite |
Standard |
|
Low Loss |
Low Loss |
Low Loss |
|
≤0.35 dB |
≤0.75 dB |
≤0.35 dB |
≤0.75 dB |
≤0.35dB |
≤0.60dB |
|
Return Loss |
≥60 dB |
≥60 dB |
N/A |
|
Durability |
≥500 times |
≥500 times |
≥500 times |
|
Operating Temperature |
-40 ~ +80 |
-40 ~ +80 |
-40 ~ +80 |
|
Test Wavelength |
1310nm |
1310nm |
850nm |
Common Termination
|
Type |
Single mode |
Multi mode |
|
(UPC APC polish) |
(UPC polish) |
|
Insertion Loss |
≤0.30dB |
≤0.30dB |
|
Return Loss |
≥55 dB |
≥60 dB |
≥25 dB |
|
Durability |
≥1000 times |
≥1000 times |
|
Operating Temperature |
-40 ~ +80 |
-40 ~ +80 |
|
Test Wavelength |
1310nm |
850nm |
Note: Maximum Bandwidths of Different Multimode Fibers
OM1 – 62.5 um Core – 10GBit up to 33 meters, gigabit up to 300m
OM2 – 50 um Core – 10GBit up to 82 meters,gigabit up to 500m
OM3 – 50 um Core, Laser Optimized – 10GBit up to 300 meters,gigabit up to 1000m
OM4 – 50 um Core, Laser Optimized – 10GBit up to 550 meters,gigabit up to 1000m
Make To Order
|
Fiber Type |
Fiber Standard |
Fiber Count |
Cable Type |
Termination |
Cable Length(m) |
Breakout Length 1&2(Inches) |
Breakout Termination |
Polish Type |
OM4
OM3
OS1/2
OM2
OM1 |
12 Fibers |
8~144 Fibers |
LSZH Bunch
LSZH Ribbon
Riser Bunch
Riser Ribbon |
First Connector:
MTP Female
MTP Male |
1~999 |
12~99
(36" is typical) |
3.0mm |
UPC
APC |
|
24 Fibers |
24~144 Fibers |
Second Connector:
LC Duplex/LC Simplex
SC Duplex/SC Simplex
ST Duplex/ST Simplex
FC Duplex/FC Simplex |
0.9μm (standard)
2.0mm
3.0mm |
Note:
Polishing connector (A): PC (multimode), APC 8° (single-mode)
Polishing connector (B) : PC (multimode/single-mode), APC 8° (single-mode)
Furcation length (B): 0.8m
Type of protection connector: IP20
Patch cord Type: Minicore cable, round
.webp "Séparateur de fibre & Mux")
