EDFA Optical Amplifier for SDH Networks Gain 30dB Single Channel Pre-amplifier
Fiber-Mart SDH-EDFA-PA-G30 pre-amplifier designed for the Synchronous Digital Hierarchy (SDH) applications are single channel EDFA which are installed before the receiver to improve the receiving sensitivity, and extend signal transmission distance. The device features wide input power range from -35dBm to -25dBm, 30dB gain and low noise figure. It also includes RS-232 computer interface.
This Rack mountable amplifier work by default in constant signal-gain mode, but they can be configured to constant total output-power mode. These units are used in long-hauls transmission applications, especially for PDH, SDH, SONET and optical Ethernet transmission application. Its ease-of-use and performance make the SDH-EDFA-PA-xx series the ideal solution for Access and Metro optical networks.
Features
-
Service as a pre-amplifier C-Band 1550nm
-
Gain: 30dB
-
Wide input power range: -35dBm to -25dBm
-
Low loise figure: typical is< 4.5dB
-
Connectors: SC/UPC, SC/APC, FC/UPC, FC/APC, LC/UPC, LC/APC, ST/UPC and ST/APC connectors are available
-
Single or dual 110VAC, 220VAC, -48VDC, and/or 100V-240V power supply
-
Serial interface comes with RS232, RS485
-
1U 19” rack mount structure for easy installation
-
All performance compatible with BellcoreGR-1312-CORE request
-
Use for Access and Metro optical networks
-
Works with point-to-point applications
-
High stability and reliability
-
3 years warranty
-
10 years of operation life
-
OEM is available
Highlights
-
Hot Swap Network Management Agent
-
SNMP network management interface: RJ45
-
Support Telnet for optional
-
ASE noise filter & ASE suppression filters
-
High Precise ACC (automatic constant current) Circuit as default, if you need other circuit, please contact at [email protected]
-
ATC (automatic temperature control) function
-
Offering status appearance and diagnosing fault with LCD
Mechanical Structure
Structure Example
NOTE:
-
The SDH EDFA from Fiber-Mart including 1+2+3.
Parameters |
Symbol |
Min |
Typ |
Max |
Unit |
Operation Wavelength |
λc |
1530 |
1550 |
1562 |
nm |
Saturated output power(1) |
Po |
------ |
------ |
------ |
dBm |
Input power (2) |
Pi |
-35 |
------ |
-25 |
dBm |
Gain |
G |
------ |
30 |
------ |
dB |
Noise Figure |
NF |
------ |
4.5 |
------ |
dB |
Input Isolation |
ISOi |
30 |
------ |
------ |
dB |
Output Isolation |
ISOo |
30 |
------ |
------ |
dB |
Input pump leakage |
PumpLin |
------ |
------ |
-35 |
dBm |
Output pump leakage |
PumpLout |
-45 |
------ |
-45 |
dBm |
Return Loss |
RL |
------ |
------ |
-45 |
dB |
Polarization Dependent Gain |
PDG |
------ |
------ |
0.3 |
dB |
PMD |
PMD |
------ |
------ |
0.5 |
ps |
Operation Temperature |
Tw |
-5 |
------ |
60 |
℃ |
Storage Temperature |
Ts |
-40 |
------ |
80 |
℃ |
Humidity (3) |
|
10 |
------ |
85 |
% |
Power Voltage |
Vps |
85/170 |
110/220 |
132/264 |
VAC |
Power Consumption |
P |
|
|
18 |
W |
Serial interface |
RS232, RS485 |
Power supply |
110VAC, 220 VAC, -48VDC, or 100V-240V |
Connectors |
Simplex SC/UPC, SC/APC, FC/UPC, FC/APC, LC/UPC, LC/APC , ST/UPC and ST/APC available |
Warranty |
3 years |
(1): Customer optional
(2): Pre-Amplifier: input power –35~-25dBm; Inline-Amplifier: input power –25~-10dBm, Booster: input power –10~+6dBm
(3): No condensation