12本のファイバー、MP / LC / SC / ST / FC、OM4ファイバー、12本標準 - MPOブレイクアウトハーネスケーブル
MPOは、高密度の光ファイバプリコネクトシステムであり、一般に3つの領域で使用されます。
高密度環境でのデータセンタアプリケーション
建物への光ファイバー
スプリッタ、40G / 100G SFP、SFP +などのファイバ機器の内部コネクタアプリケーション。
Fiber-MartのMTPファイバパッチケーブルは、IEC-61754-7およびTIA-604-5(FOCIS-5)規格に準拠しています。
10G upgrade to 40G/100G data center.
MTPコネクタ
|
|
MPO Male with Pins |
MPO Female without Pins |
Two other clearly visible features are the noses and guide grooves (keys) on the top side. The Female and Male need to be used together. |
予め終端されたMTP技術 - 極性タイプB(クロス)
上記のアプリケーションは、QSFP +ポートを(4)SFP +ポートに直接接続するMTP-LCハーネスケーブル用です。
多くの既存のDC環境では、LC-MTPケーブルを使用して、スイッチ、ラックパッチパネル、およびメイン分配ケーブルパネル(MDA)間の高密度ファイバトランクをサポートしています。
例えば:
上記の8ファイバMTP-LCアセンブリは、一方の端にピンレスコネクタを使用してCisco Nexus 6000シリーズのQSFPポートに接続し、もう一方の端に4つのLC unibootコネクタを搭載して、スイッチ上のSFP +ポートに接続します。 組立体の極性は、MTPコネクタからのファイバを外側から内側に対にするので、ファイバ1およびファイバ12は、ファイバ2およびファイバ11などと同様に二重対である。
アセンブリ構造図
12ファイバミニコアケーブル構造
MTPハイブリッドハーネスファイバパッチケーブルは、LC、FC、SC、ST、またはMTRJコネクタを使用して一端と他端をMPOコネクタで終端し、さまざまなファイバケーブル要件に対応します。
1. MTPケーブルのデフォルト直径は3.0mmです。
3.Fiber-Martはカスタムを引っ張ることもできます。必要ならば私達に連絡してください。
MTP / MPO機械および試験装置
1 |
Our adopt industry's leading high-performance polishing machine, and complemented by precision plates holders designed for MT ferrules. |
|
2 |
The industry leading device of 3D interferometer provides verification of MTP/MPO polishing process, the interferometer making all parameters of hte polished MT ferrule complies and exceeds industry standards. |
|
3 |
After the 3D interference detection, the flexibility of the tester provides the the complete spectrum of optical testing required for complex and high fiber count cable assemblies. |
MPO終了
Type |
Single mode |
Single mode |
Multi mode |
(APC polish) |
(PC polish) |
(PC polish) |
Fiber count |
8, 12, 24 etc. |
8, 12, 24 etc. |
8, 12, 24 etc. |
Fiber type |
G652D, G657A1 etc. |
G652D, G657A1 etc. |
OM1, OM2, OM3 etc. |
Maximum Insertion Loss |
Elite |
Standard |
Elite |
Standard |
Elite |
Standard |
Low Loss |
Low Loss |
Low Loss |
≤0.35 dB |
≤0.70 dB |
≤0.35 dB |
≤0.70 dB |
≤0.35dB |
≤0.60dB |
Return Loss |
≥60 dB |
≥60 dB |
N/A |
Durability |
≥500 times |
≥500 times |
≥500 times |
Operating Temperature |
-40℃ ~ +80℃ |
-40℃~ +80℃ |
-40℃~ +80℃ |
Test Wavelength |
1310nm |
1310nm |
850nm |
共通の終了
Type |
Single mode |
Multi mode |
(UPC APC polish) |
(UPC polish) |
Insertion Loss |
≤0.30dB |
≤0.30dB |
Return Loss |
≥55 dB |
≥60 dB |
≥25 dB |
Durability |
≥1000 times |
≥1000 times |
Operating Temperature |
-40℃ ~ +80℃ |
-40℃ ~ +80℃ |
Test Wavelength |
1310nm |
850nm |
Note: Maximum Bandwidths of Different Multimode Fibers
OM1 – 62.5 um Core – 10GBit up to 33 meters, gigabit up to 300m
OM2 – 50 um Core – 10GBit up to 82 meters,gigabit up to 500m
OM3 – 50 um Core, Laser Optimized – 10GBit up to 300 meters,gigabit up to 1000m
OM4 – 50 um Core, Laser Optimized – 10GBit up to 550 meters,gigabit up to 1000m
オーダーメイド
Fiber Type |
Fiber Standard |
Fiber Count |
Cable Type |
Termination |
Cable Length(m) |
Breakout Length 1&2(Inches) |
Breakout Termination |
Polish Type |
OM4
OM3
OS1/2
OM2
OM1 |
12 Fibers |
8~144 Fibers |
LSZH Bunch
LSZH Ribbon
Riser Bunch
Riser Ribbon |
First Connector:
MPO Female
MPO Male |
1~999 |
12~99
(36" is typical) |
3.0mm |
UPC
APC |
24 Fibers |
24~144 Fibers |
Second Connector:
LC Duplex/LC Simplex
SC Duplex/SC Simplex
ST Duplex/ST Simplex
FC Duplex/FC Simplex |
0.9μm (standard)
2.0mm
3.0mm |
注:研磨コネクタ(A):PC(マルチモード)、APC 8°(シングルモード)
研磨コネクタ(B):PC(マルチモード/シングルモード)、APC 8°(シングルモード)
分岐長(B):全長1mあたり0.5m / 0.3m
保護コネクタのタイプ:IP20
パッチコードの種類:ミニコアケーブル、丸