EnglishEspañolFrançaisDeutschPortuguês日本語한국인
96 Fibers Single Mode 12 Strands MTP Harness Cable 3.0mm LSZH/Riser

Press Esc key to close this popup
  • 96 Fibers Single Mode 12 Strands MTP Harness Cable 3.0mm LSZH/Riser

96 Fibers Single Mode 12 Strands MTP Harness Cable 3.0mm LSZH/Riser

Item de produto: #13104
P/N: 12FMTPLCSMF
Começar por: US$270.00

Seleccione:













Order Today, Ship before 06/28/2024, from U.S. or HK
  • Descrição
  • Ficha dados
  • Tags

96 Fibers Single Mode 12 Strands MTP Harness Cable 3.0mm LSZH/Riser

 

MTP is the high dense degree of optical fiber pre-connect system,which is generally use in three areas:The Data Center application with high dense degree environmentThe optical fiber to the buildingThe internal connector application in fiber equipment.


Fiber-MART's MTP fiber patch cable is compliant to IEC-61754-7 and TIA-604-5(FOCIS-5)standard.It can be widely used for10G upgrade to 40G/100G data center.

MTP Connector

MTP Male with Pins MTP Female without Pins
Two other clearly visible features are the noses and guide grooves(keys)on the top side.The Female and Male need to be used together.

Pre-terminated MTP Technology-Polarity Type B(Cross)

The application above is for the MTP-LC harness cable connecting a QSFP+port to(4)SFP+ports directly.

In many existing DC environments,LC-MTP cables are used to support high density fiber trunks between switches,rack patch panels and main distribution cabling panels(MDA).


For example:

The above is the Eight-Fiber MTP-LC Assembly uses a pinless connector on one end for interfacing with the QSFP port on the Cisco Nexus 6000series,The other end contains four LC uniboot connectors,which provide connectivity to the SFP+ports on the switch.The polarity of the assembly pairs the fibers from the MTP Connector from the outside to the inside;thus,fiber 1 and fiber 12 are a duplex pair,as are fiber 2 and fiber 11,etc.


MTP&MPO Difference

The term MTP is a registered trademark of US Conec,which have became the tendency inEurope&Americanfiber communications areas at present.

Assembly Structure Illustration

12-Fiber Mini-Core Cable structure

MTP Hybrid Harnesses Fiber Patch Cables are terminated with MTP connector on one end and other end with LC,FC,SC,ST,or MTRJ connectors to meet a variety of fiber cabling requirements.
1.The default diameter of the MTP cable is 3.0mm.
2.The diameter of branch cable could be choose as 0.9mm,2.0mm,please kindly contact us at [email protected] for other diameter standard.
3.Fiber-MART can also custom the pulling eyes,welcome to contact us if you need.

MTP/MPO Machinery&Testing Equipment



1 Our adopt industry's leading high-performance polishing machine,and complemented by precision plates holders designed for MT ferrules.
 
2 The industry leading device of 3D interferometer provides verification of MTP/MPO polishing process,the interferometer making all parameters of hte polished MT ferrule complies and exceeds industry standards.
 
3 After the 3D interference detection,the flexibility of the tester provides the the complete spectrum of optical testing required for complex and high fiber count cable assemblies.

 

 

MTP Termination

 

Type Single mode Single mode Multi mode
(APC polish) (PC polish) (PC polish)
Fiber count 8, 12, 24 etc. 8, 12, 24 etc. 8, 12, 24 etc.
Fiber type G652D, G657A1 etc. G652D, G657A1 etc. OM1, OM2, OM3 etc.
Maximum Insertion Loss Elite Standard Elite Standard Elite Standard
Low Loss Low Loss Low Loss
≤0.35 dB ≤0.75 dB ≤0.35 dB ≤0.75 dB ≤0.35dB ≤0.60dB
Return Loss ≥60 dB ≥60 dB N/A
Durability ≥500 times ≥500 times ≥500 times
Operating Temperature -40 ~ +80 -40 ~ +80 -40 ~ +80
Test Wavelength 1310nm 1310nm 850nm

Common Termination

Type Single mode Multi mode
(UPC APC polish) (UPC polish)
Insertion Loss ≤0.30dB ≤0.30dB
Return Loss ≥55 dB ≥60 dB ≥25 dB
Durability ≥1000 times ≥1000 times
Operating Temperature -40 ~ +80 -40 ~ +80
Test Wavelength 1310nm 850nm

 



Note: Maximum Bandwidths of Different Multimode Fibers
OM1 – 62.5 um Core – 10GBit up to 33 meters, gigabit up to 300m
OM2 – 50 um Core – 10GBit up to 82 meters,gigabit up to 500m
OM3 – 50 um Core, Laser Optimized – 10GBit up to 300 meters,gigabit up to 1000m
OM4 – 50 um Core, Laser Optimized – 10GBit up to 550 meters,gigabit up to 1000m

Make To Order

 

Fiber Type Fiber Standard Fiber Count Cable Type Termination Cable Length(m) Breakout Length 1&2(Inches) Breakout Termination Polish Type
OM4
OM3
OS1/2
OM2
OM1
12 Fibers 8~144 Fibers LSZH Bunch
LSZH Ribbon
Riser Bunch
Riser Ribbon
First Connector:
MTP Female
MTP Male
1~999 12~99
(36" is typical)
3.0mm UPC
APC
24 Fibers 24~144 Fibers Second Connector:
LC Duplex/LC Simplex
SC Duplex/SC Simplex
ST Duplex/ST Simplex
FC Duplex/FC Simplex
0.9μm (standard)
2.0mm
3.0mm

Note:

Polishing connector (A): PC (multimode), APC 8° (single-mode)

Polishing connector (B) : PC (multimode/single-mode), APC 8° (single-mode)

Furcation length (B): 0.8m

Type of protection connector: IP20

Patch cord Type: Minicore cable, round




 


Fibermart MPO Fiber Patch Cable Datasheet

 

 

 

Datasheet to Download

Add your Tags



Por favor, diga-nos o que pensa e compartilhe suas opiniões com os outros. Certifique-se de concentrar os seus comentários sobre o produto.



Copyright © 2024 Fiber-MART.COM. All Rights Reserved. Privacy Notice. Terms of Service
Fibermart ISO9001Fibermart Secure Certificate
Tags de produto: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Email us