4 Ports XFP to XFP 10G OEO Converter Transponder w/full 3R Support
10G WDM Transponder OEO Converter comes with two XFP ports, are linecard that can support the "Three Rs" to Retime, Regenerate and Reshape the optical signal.
Transponders are fiber-to-fiber media converters that convert wavelengths for Wavelength Division Multiplexing (WDM) applications.
Fiber-Mart transponders are protocol and rate-transparent fiber media converters that support SFP, SFP+ and XFP transceivers with data rates up to 11.32 Gpbs, and our transponders provide seamless integration of different fiber types by converting multi-mode fiber to single-mode fiber, and dual fiber to single-fiber.
Fiber-to-Fiber media converters extend network distance by converting wavelengths (1310 to 1550), amplifying optical power. Fiber-MART.Com transponders as re-generators are also an optical – electrical – optical (O-E-O) converter with electrical amplification of the signal by FEC to realize long distances fiber transmission.
Attention: This is a XFP to/from XFP OEO card for 1U Rack Chassis . It could be inserted into our 1U Multi-services unified platform Managed Chassis
Features
-
10G Transparent Transponders for Ethernet, SDH , Fiber Channel, OTN, digital video, others.
-
3R Repeater/Regenaration with FEC(Reed-Solomon Algorithms) for SDH, Ethernet and Fibre Channel.
-
Support DWDM/CWDM transceivers
-
Configurable operation mode.
-
Multiple chassis versions: 1RU chassis with 2 slots and 2RU chassis with 17 slots.
-
Compact chassis design.
-
Redundant and modular power supplies. AC and DC. In-service replaceable.
-
Modular filter and fan unit. In-service replaceable.
-
Powerful Network Management function Web, SNMP, Console, others
10G OEO Card for 2U Unified Platefrom Chassis
The 2U Unified Platefrom Chassis supports the2-port 10G SFP+ to SFP+, 2-port 10G XFP to SFP+, 2-port 10G XFP to XFP, each card can coexist together in this 2U 17-slot Managed chassis.
10G OEO Card for 1U Unified Platefrom Chassis
Fiber-Mart can also provide 10G OEO Card for 1U Unified Platefrom Chassis. This kind of OEO cards has more ports comparing with the 2-port OEO cards which are supported by 2U Unified Platefrom Chassis. The 1U Unified Platefrom Chassis supports 4-port 10G XFP OEO card card and 8-port 10G SFP+ OEO card. Each card can coexist together in this 1U 2-slot Unified Platefrom Chassis.
Specifications
Performance Data |
Technical Indexes |
Equipment function |
3R Repeater |
Transmission Speed |
10Gb/s ( 9.95Gb/s-11.35Gb/s ) |
Protocols |
IEEE802.3ae (10Gbase-SR/LR/ER/ZR/LRM) |
Access Type |
10G LAN/10G WAN |
Interface Type |
A Type: SFP+ To/From SFP+
B Type: XFP To/From XFP |
Transmission Distance |
SFP+ module/XFP module: it depends on the transmission distance of the module |
Maximum Packet Forwarding Rate |
14,880,950/S |
Network management information: |
• Card type information
• SFP+/XFP fiber module detection
• SFP+/XFP fiber module DMI function ( Temperature 、 Voltage 、 Optical power )
• Link status detector
• Enable/Disabled Loopback test function
• Enable/Disable PRBS Generator and checker function
• Rate select (10Gbase-Lan or Wan )
• Remote card´s status monitor ( only in pairs ) |
power requirement |
Rack-mountable : AC 85 ~ 220V OR DC -48V
Standalone: AC 220V OR DC -48V
Power consumption: ≤6W |
Work Environment |
Operating Temp: 0~ 50 ℃
Storage Temp: -10~ 70 ℃
Humidity: 5%~90% ( non-condensing ) |