YOKOGAWA AQ1200 MFT-OTDR Handheld Optical Fiber Test Tool 1310/1550nm

Introduction

The AQ1200 is the newest addition to Yokogawa's OTDR product family offering an even smaller and lighter alternative to the AQ7275 models.
Like the larger AQ7275, it also offers an industry leading 0.8m event dead zone as well as the convenient capability to display a fiber connector inspection probe using one of the unit's standard USB I/O ports.
Tradeoffs compared to the larger AQ7275 include omission of the built-in launch fiber option, limited to SMF fiber only and a reduced dynamic range of 32/30dB.

Features

a. OTDR that supports SM1310/1550nm with a short 80 cm event dead zone
b. Quick power on for faster operations
c. Able to display trace and event information at the same time
d. Full auto mode for novice users and information tips for more experienced users
e. Bright LCD screen for easy viewing inside buildings and outside
f. Includes Fault Locator functions for fast measurements
g. Supports external USB Video fiber inspection probe

Excellent Functionality and Operability

a. 5.7 inch color LCD for easy viewing
b. Multi-language support
c. AQ7275 OTDR-like interface
d. USB port for data storage
e. Quick and easy data exchange with PC through USB connection

Application Drawing

Fiber-Mart is specializing in supplying fiber optic components and network equipment, and we are trying to complete this system. For the OTDR, we provide one year warranty for each domestic and foreign brand product. If you have any problems or special requirement of this YOKOGAWA AQ1200 MFT-OTDR, please feel free to contact us. We will try our best to provide you the best service.

Internal Memory Compliant standards Emissions Immunity

Common Specifications
Horizontal Axis Parameters
Sampling resolution	5cm, 10cm, 20cm, 50cm, 1m, 2m, 4m, 8m, 16m, 32m
Readout resolution	1cm (Min.)
Number of sampled data	Up to 128,000 points (Firmware Rev2.01 or later)
Group refractive index	1.30000 to 1.79999 (in 0.00001 steps)
Unit of distance	km, kf or miles
Distance measurement accuracy	+/- 1m +Measurement distance210 +/- sampling resolution
	Excluding IOR uncertainty
Vertical Axis Parameters
Vertical axis scale	0.2 dB/div, 0.5dB/div, 1dB/div, 2dB/div, 5dB/div, 7.5dB/div
Readout resolution	0.001dB(Min.)
Loss measurement accuracy	+/- 0.05dB/dB (When the measuring loss is 1dB or less, the accuracy is within +/-0.05 dB.)
OTDR Measurement Function
Distance measurement	Displays up to eight digits of the relative one way direction between two arbitrary points on the trace.
Loss measurement	Displays one way loss in steps of 0.01dB to a maximum of 5 digits. Displays the one way loss, loss per unit length, and splice loss between any arbitrary points on the trace.
Return loss measurement	Measurement return loss and total return loss of a fiber cable or between two arbitrary points on the trace.
OTDR Analysis Functions
Analysis functions	Section analysis

Memory capacity	1000 waveforms or more
	Can store measured waveforms and measurement conditions
Display
Display	5.7 inch color TFT LCD
Total number of displayed pixelsa.	640 (horizontal) * 480 (vertical) pixels
a. The LCD may contain some pixels that are always ON or OFF (0.002% or fewer of all displayed pixels including RGB), but this is not indicative of a general malfunction.
External Interface
USB	USB1.1 Type A and Type B, one each
	Type A: For external memory, external printer, and fiber inspection probe
	Type B (mini): For connecting to an external PC for remote control or access to the OTDR'S internal memory
File Formats
File formats	Read: SOR, SET (AQ7270/AQ7275/AQ1200)
	Write: SOR (Telcordia), SET, CSV, BMP, JPG, PNG
General Specifications
Item		Specification
Environmental conditions	Storage temperature	-20 to 60℃
	Operating temperature	0 to 45℃ (0 to 40℃ when AC adapter is being used); (0 to 35℃when battery is being charged)
	Humidity	20 to 85% RH( no condensation)
Power requirements		100 to 240 VAC, 50/60 Hz
Battery pack		Run time: 6 hours, Recharge time : 5 hours
Dimensions		217.5 (W) * 157(H) * 74(D)mm, excluding projections
Mass		Approx. 1KG, including battery pack
Laser safety	Class 1 M (IEC 60825-1:2007)
Safety	EN61010-1
EN61326-1 class A, EN55011 class A, group 1
EN61326-1 Table 2 (for industrial locations)

If any option which is not indicate in your Ordering, please write your option or request in your ORDER to Fiber-Mart, and contact with us.

You can place your Order Online in our website, you can send us a Purchase Order as a company, or you can request a Proforma Invoice Order to make everything clear!

Get All the Support about Purchase

Professional Service & Support is available in three different ways

: Chat live with Fiber-Mart; Offline; Please leave us a message, we'll respond to you as soon.
8 am. to Midnight PST Mon. to Fri. or Leave Message

: Email to Fiber-Mart; E-mail Now; Post a inquiry request and get a quick response from Fiber-Mart.

: Make a Call +1 (707)-702-1573; Or click on the button below to have us call you.; 8 am.- 5 pm. PST. Mon. to Fri.; Get a Call

Shipping Time

: FedEx IP: Within 1-4 business days; FedEx IE: Within 4-6 business days; DHL: Within 2-6 business days; EMS: Within 4-15 business days; UPS: Within 1-3 business days; Hong Kong Post Airmail: Within 10-30 business days