FM SKU#:SKU60152J
Model#:2P-4G-3R-SS-FMOEO-2U
MFG PART#:
100Mb to 4.25G WDM Transponder OEO Converter comes with two SFP ports, are lindcard that can support the "Three Rs" to Retime, Regenerate and Reshape the optical signal.
Transponders are fiber-to-fiber media converters that convert wavelengths for Wavelength Division Multiplexing (WDM) applications.
Fiber-Mart transponders are protocol and rate-transparent fiber media converters that support SFP, SFP+ and XFP transceivers with data rates up to 11.32 Gpbs, and our transponders provide seamless integration of different fiber types by converting multi-mode fiber to single-mode fiber, and dual fiber to single-fiber.
Fiber-to-Fiber media converters extend network distance by converting wavelengths (1310 to 1550), amplifying optical power. Fiber-MART.Com transponders as re-generators are also an optical – electrical – optical (O-E-O) converter with electrical amplification of the signal by FEC to realize long distances fiber transmission.
Features
-
100Mb to 4.25G Transparent Transponders for Ethernet, SDH , Fiber Channel, OTN, digital video, others.
-
3R Repeater/Regenaration with FEC(Reed-Solomon Algorithms) for SDH, Ethernet and Fibre Channel.
-
Support DWDM/CWDM transceivers
-
Configurable operation mode.
-
Multiple chassis versions: 2RU chassis with 17 slots and single chassis.
-
Compact chassis design.
-
Redundant and modular power supplies. AC and DC. In-service replaceable.
-
Modular filter and fan unit. In-service replaceable.
-
Powerful Network Management function Web, SNMP, Console, others
OEO Converter Standalone
OEO Card for 2U Unified Platefrom Chassis
The 2ports OEO card can also compatible with 2U Unified Platefrom Chassis. Each card ( SFP+ to SFP+, XFP to SFP+, XFP to XFP, SFP to SFP ) can coexist together in this 2U 17-slot Managed chassis.
Specifications
Performance Data |
Technical Indexes |
Equipment function |
3R Repeater |
Transmission Speed |
100Mb to 4Gbps |
Protocols |
IEEE802.3ae |
Access Type |
LAN/WAN |
Interface Type |
SFP To/From SFP |
Transmission Distance |
SFP module: it depends on the transmission distance of the module |
Network management information: |
• Card type information
• SFP fiber module detection
• SFP fiber module DMI function (Temperature , Voltage ,Optical power )
• Link status detector
• Enable/Disabled Loopback test function
• Enable/Disable PRBS Generator and checker function
• Rate select
• Remote card´s status monitor ( only in pairs ) |
power requirement |
Rack-mountable : AC 85 ~ 220V OR DC -48V
Standalone: AC 220V OR DC -48V
Power consumption: ≤6W |
Work Environment |
Operating Temp: 0~ 50 ℃
Storage Temp: -10~ 70 ℃
Humidity: 5%~90% ( non-condensing ) |
Dimension |
Card: 11.5mm (W ) × 78mm ( D )
Standalone: 156mm ( W ) × 128mm ( D ) × 32mm ( H ) |