MTP は高密度の光ファイバー プリコネクト システムであり、一般に次の 3 つの分野で使用されます: 高密度環境のデータセンター アプリケーション 建物への光ファイバー ファイバー機器の内部コネクタ アプリケーション。
Fiber-MART の MTP ファイバー パッチ ケーブルは、IEC-61754-7 および TIA-604-5(FOCIS-5) 規格に準拠しています。10G から 40G/100G データセンターへのアップグレードに広く使用できます。
MTPコネクタ
|
|
MTP Male with Pins |
MTP Female without Pins |
Two other clearly visible features are the noses and guide grooves(keys)on the top side.The Female and Male need to be used together. |
終端済みMTPテクノロジー - 極性タイプB(クロス)
上記のアプリケーションは、QSFP+ ポートを (4) SFP+ ポートに直接接続する MTP-LC ハーネス ケーブル用です。
多くの既存の DC 環境では、LC-MTP ケーブルは、スイッチ、ラック パッチ パネル、およびメイン配電ケーブル パネル (MDA) 間の高密度ファイバ トランクをサポートするために使用されます。
例えば:
上記は、8 ファイバ MTP-LC アセンブリで、一方の端にピンレス コネクタを使用して Cisco Nexus 6000 シリーズの QSFP ポートとインターフェイスします。もう一方の端には 4 つの LC ユニブート コネクタが含まれており、スイッチの SFP+ ポートへの接続を提供します。 アセンブリの極性により、MTP コネクタからのファイバが外側から内側にペアになります。したがって、ファイバ 1 とファイバ 12 は二重ペアとなり、ファイバ 2 とファイバ 11 なども同様になります。
MTPとMPOの違い
MTP という用語は、米国 Conec の登録商標であり、現在、欧米の光通信分野でその傾向が見られます。
組立構造図
12心ミニコアケーブル構造
MTP ハイブリッド ハーネス ファイバー パッチ ケーブルは、一方の端が MTP コネクタで終端され、もう一方の端が LC、FC、SC、ST、または MTRJ コネクタで終端され、さまざまなファイバー ケーブル要件を満たします。
1.MTPケーブルのデフォルトの直径は3.0mmです。
2.分岐ケーブルの直径は0.9mm、2.0mmから選択できます。他の直径標準については、[email protected]までお問い合わせください。
3.Fiber-MART は引き目をカスタマイズすることもできます。必要な場合はお問い合わせください。
MTP/MPO 機械&試験装置
1 |
Our adopt industry's leading high-performance polishing machine,and complemented by precision plates holders designed for MT ferrules. |
|
2 |
The industry leading device of 3D interferometer provides verification of MTP/MPO polishing process,the interferometer making all parameters of hte polished MT ferrule complies and exceeds industry standards. |
|
3 |
After the 3D interference detection,the flexibility of the tester provides the the complete spectrum of optical testing required for complex and high fiber count cable assemblies. |
MTP の終了
Type |
Single mode |
Single mode |
Multi mode |
(APC polish) |
(PC polish) |
(PC polish) |
Fiber count |
8, 12, 24 etc. |
8, 12, 24 etc. |
8, 12, 24 etc. |
Fiber type |
G652D, G657A1 etc. |
G652D, G657A1 etc. |
OM1, OM2, OM3 etc. |
Maximum Insertion Loss |
Elite |
Standard |
Elite |
Standard |
Elite |
Standard |
Low Loss |
Low Loss |
Low Loss |
≤0.35 dB |
≤0.75 dB |
≤0.35 dB |
≤0.75 dB |
≤0.35dB |
≤0.60dB |
Return Loss |
≥60 dB |
≥60 dB |
N/A |
Durability |
≥500 times |
≥500 times |
≥500 times |
Operating Temperature |
-40 ~ +80 |
-40 ~ +80 |
-40 ~ +80 |
Test Wavelength |
1310nm |
1310nm |
850nm |
共通の終端
Type |
Single mode |
Multi mode |
(UPC APC polish) |
(UPC polish) |
Insertion Loss |
≤0.30dB |
≤0.30dB |
Return Loss |
≥55 dB |
≥60 dB |
≥25 dB |
Durability |
≥1000 times |
≥1000 times |
Operating Temperature |
-40 ~ +80 |
-40 ~ +80 |
Test Wavelength |
1310nm |
850nm |
注: さまざまなマルチモード ファイバの最大帯域幅
OM1 – 62.5 um コア – 10GBit 最大 33 メートル、ギガビット最大 300m
OM2 – 50 um コア – 10GBit 最大 82 メートル、ギガビット最大 500m
OM3 – 50 um コア、レーザー最適化 – 10Gbit で最大 300 メートル、ギガビットで最大 1000m
OM4 – 50 um コア、レーザー最適化 – 10Gbit で最大 550 メートル、ギガビットで最大 1000m
オーダーメイド
Fiber Type |
Fiber Standard |
Fiber Count |
Cable Type |
Termination |
Cable Length(m) |
Breakout Length 1&2(Inches) |
Breakout Termination |
Polish Type |
OM4
OM3
OS1/2
OM2
OM1 |
12 Fibers |
8~144 Fibers |
LSZH Bunch
LSZH Ribbon
Riser Bunch
Riser Ribbon |
First Connector:
MTP Female
MTP Male |
1~999 |
12~99
(36" is typical) |
3.0mm |
UPC
APC |
24 Fibers |
24~144 Fibers |
Second Connector:
LC Duplex/LC Simplex
SC Duplex/SC Simplex
ST Duplex/ST Simplex
FC Duplex/FC Simplex |
0.9μm (standard)
2.0mm
3.0mm |
注記:
研磨コネクタ(A):PC(マルチモード)、APC 8°(シングルモード)
研磨コネクタ(B):PC(マルチモード/シングルモード)、APC 8°(シングルモード)
分岐長さ(B):0.8m
保護コネクタの種類: IP20
パッチコードタイプ: ミニコアケーブル、丸型