MFG PART#:
Single-mode Tight Buffered Glass Yarn LSZH Jacket Indoor Outdoor Cable
Indoor/Outdoor Tight-Buffered Cables are specified for campus network cabling between buildings where inter-building lengths are short enough. So that the installer can recognize savings from the lower costs of terminating tight-buffered cables.
LSZH (LSZH, Low smoke, Zero halogen, Flame-retardant)) material jacket, good fame retardant performance. Tight-buffered cable design typically offers a smaller package and more flexible cable. The glass yarn improves the cable strength. With a plenum rating, this cable can be used in all environments: plenum, riser, general inside plant, outside plant.
Cable Structure
.jpg) |
Features
Streamlined installation with direct outdoor-to-indoor cable transitions. Low Smoke Zero Halogen available, good fame retardant performance. Low shrinkage and high tensile strength. High density, easy installation in transitional aerial and duct applications. Enhances system performance by avoiding additional splice point attenuation. Lower costs of terminating tight-buffered cables. Small diameter, light weight and friendly installation.
| | Application
Outside plant, inter-building installations Aerial, duct applications and entrance facilities Local area networks Private networks
|
Package
 |  |
| Package 1 | Package 2 |
Package 1: usually for indoor cable, light weight cables.
Package 2: usually for outdoor cable, heavy weight cables
Usually for each roll, the cable length is 2km, but we could provide customized package for different cable lengths. |
Mark
Usually we only attach Test Report on the out package of the cable, but we could also mark as your requirements, such as:
1. Company Name
2. Cross /Net weight
3. Drum No: XX
4. Cable Length : XX
Cable production throughout the chart
| Cable Count | Outside
Diameter | Tight buffer
fiber OD | Cable Weight
(kg/km) | Tensile Load
（N) | Bend Radius
(mm) | Storage
Temperature |
| （mm) | （mm) | short term | long term | short term | long term | short term | long term | （℃） |
| 4 | 6.3±0.2 | 0.9 | 55 | 1000 | 2000 | 1000 | 20D | 10D | -40~+60 |
| 6 | 6.3±0.2 | 0.9 | 55 | 1000 | 2000 | 1000 | 20D | 10D | -40~+60 |
| 8 | 6.3±0.2 | 0.9 | 55 | 1000 | 2000 | 1000 | 20D | 10D | -40~+60 |
| 12 | 6.3±0.2 | 0.9 | 55 | 1000 | 2000 | 1000 | 20D | 10D | -40~+60 |
| 24 | 6.7±0.2 | 0.9 | 70 | 1000 | 2000 | 1000 | 20D | 10D | -40~+60 |
| G.652 | 50/125µm | 62.5/125µm |
Attenuation
(+20°C) (dB/km) | @850nm | | ≤3.0 | ≤3.0 |
| @1300nm | | ≤1.0 | ≤1.0 |
| @1310nm | ≤0.36 | | |
| @1550nm | ≤0.22 | | |
| Bandwidth (Class A) (MHz·km) | @850nm | | ≥600 | ≥200 |
| @1300nm | | ≥1200 | ≥600 |
| Numerical Aperture | | 0.200±0.015NA | 0.275±0.015NA |
| Cable Cut-off Wavelength λcc (nm) | ≤1260 | | |
.webp)
