12 Fibras 1Entrada-1Salida Serie FM013 Cajas de Empalme de Fibra Óptica Horizontales
Descripción
Los cierres de empalme de fibra horizontales (en línea) se producen para proporcionar espacio y protección para el empalme y la unión del cable de fibra óptica. Están con el diseño sellado perfecto que tiene la función de prueba de agua y polvo. Ahora ofrecemos muchos tipos de cierres de empalme de fibra óptica horizontales que varían en tamaño, tipos de núcleos de fibra y cantidad de fibras fusionadas. Y todos ellos tienen un buen rendimiento y precios competitivos.
Especificaciones
Excelente rendimiento de sellado, reutilizable
Tamaño compacto y resistente
Adecuado para fibra ordinaria y fibra de cinta.
Estructura superpuesta en bandeja de empalme fácil de instalar
El botón interno y externo puede asegurar un buen sellado, requisitos de torsión del cable, estiramiento, presión, flexión
Para aplicaciones aéreas y directamente enterradas
Fácil operación con la gama completa de accesorios incluidos
2 núcleos de fibra: 1in-1out
Para 12 fibras de fusión simple
Ámbito de aplicación
Este manual de instalación es adecuado para el cierre de empalme de fibra óptica (en lo sucesivo abreviado como FOSC), como guía para una instalación adecuada.
El ámbito de aplicación es: aéreo, subterráneo, montaje en pared, montaje en conducto, montaje en pozo de mano. La temperatura ambiente varía de -40 ℃ a +65 ℃
Imagen de muestra
Estructura básica y configuración
Dimensión y capacidad;
Outside dimension (LxWxH) |
340×150×70 (mm) |
Weight (excluding outside box) |
1500g-2000g |
Number of inlet/outlet ports |
2 (pieces) on each side (total 4 pieces) |
Diameter of fiber cable |
Φ8—Φ16 (mm) |
Capacity of FOSC |
Bunchy: 12—48(Cores) |
|
Componentes principales
No. |
Name of components |
Quantity |
Usage |
Remarks |
1 |
Housing |
1 set |
Protecting fiber cable splices in whole |
Internal diameter: |
|
|
|
|
270×100×60(mm) |
2 |
Insert plate |
2 pairs |
Fixing the housing |
175x56x30(mm) |
3 |
Fiber optic splice tray (FOST) |
Max 2 trays(bunchy) Max 2 trays( ribbon) |
Fixing heat shrinkable protective sleeve and holding fibers |
Suitable for: Bunchy:12,24(cores) Ribbon: 3 (pieces) |
4 |
Foundation |
1 set |
Fixing fiber cable, reinforced core and FOST |
|
5 |
Seal fitting |
1 set |
Sealing between FOSC cover and FOSC bottom |
|
6 |
Port plug |
6pieces |
Sealing empty ports |
|
7 |
Pressure testing valve |
1 set |
After injecting air, it is used for pressure testing and sealing testing |
Configuration as per requirement |
8 |
Earthing deriving device |
1 set |
Deriving metallic parts of fiber cable in FOSC for earthing connection |
Configuration as per requirement |
Principales accesorios y herramientas especiales
No. |
Name of accessories |
Quantity |
Usage |
Remarks |
1 |
Heat shrinkable protective sleeve |
|
Protecting fiber splices |
Configuration as per capacity |
2 |
Nylon tie |
|
Fixing fiber with protective coat |
Configuration as per capacity |
3 |
Insulation tape |
1 roll |
Enlarging diameter of fiber cable for easy fixing |
|
4 |
Seal tape |
1 roll |
Enlarging diameter of fiber cable which fits in with seal fitting |
Configuration as per specification |
5 |
Hanging hook |
1 set |
For aerial use |
|
6 |
Earthing wire |
1 piece |
Putting through between earthing devices |
To put through as per actual requirement |
7 |
Abrasive cloth |
1 piece |
Scratching fiber cable |
|
8 |
Labeling paper |
1 piece |
Labeling fiber |
|
9 |
Special wrench |
3 pieces |
Fixing bolts, tightening nut of reinforced core |
|
10 |
Measuring paper |
1 piece |
To measure perimeter of fiber cable, of which the diameter is enlarged with seal tape |
To measure perimeter with the corresponding measuring paper |
11 |
Buffer tube |
To be decided by customers |
Hitched to fibers and fixed with FOST, managing buffer |
Configuration as per requirement |
12 |
Desiccant |
1 bag |
Put into FOSC before sealing for desiccating air. |
|