EnglishEspañolFrançaisDeutschPortuguês日本語한국인
Fujikura FSM-88R 리본 광섬유 융착 접속기 키트

Press Esc key to close this popup
  • Fujikura FSM-88R 리본 광섬유 융착 접속기 키트

Fujikura FSM-88R 리본 광섬유 융착 접속기 키트

제품 항목: #16769
P/N: FUJI-FMM88R
US$11,950.00



Order Today, Ship before 04/02/2024, from U.S. or HK
  • 설명
  • 데이터 시트
  • 태그

Fujikura FSM-88R 코어 정렬 퓨전 스플라이서 키트

 

설명

FSM-88R은 통신용 단일 카운트 광섬유를 접합하도록 설계된 코어-투-코어 정렬 단일 광섬유 접속기입니다. 내충격성, 방진성 및 비 저항, fujikura 88r....


특징

FSM-88R은 FSM-60S의 뒤를 이은 코어 투 코어 얼라인먼트 단섬유 접속기입니다. 60S가 만든 견고한 개념 외에도 80S에는 더 빠른 접합 주기와 더 적은 작업 단계를 위한 "자동 방풍 및 튜브 히터",
더 빠른 준비, 더 긴 작동을 위한 "강력한 리튬 이온 배터리", 더 큰 고해상도 더 큰 LCD 모니터 및 다양한 언어로 된 "내장된 사용 설명서". 시장은 백본 네트워크 설치에서 고품질 접합을 위한 광전자 부품 생산에 이르기까지 다양합니다.


명세서

이러한 기능은 현장에서 접합의 생산성과 작업성을 극대화합니다.
자동 방풍 / 튜브 히터
접합 단계 감소, 세계에서 가장 빠른 접합/가열 시간.
혁신적인 휴대용 케이스 디자인
내부에 착탈식 빌트인 작업대가 있어 접합을 빠르게 시작할 수 있습니다.
환경 저항
세계 최초의 6방향 낙하 방지, 방진 및 방수.
와이드 컬러 LCD 모니터
일광 아래서 더 나은 가시성을 제공하는 고해상도 4.7인치 모니터.
강력한 리튬 이온 배터리
완전 충전당 200회의 접속 및 가열 사이클.
사전 설치된 설명서
작동, 문제 해결 등을 포함한 설명서는 다음을 통해 제공됩니다.
모니터.


주문 정보
 

Applicable fibres SM (ITU-T G.652 & G.657), MM (ITU-T G.651),DS (ITU-T G.653), NZDS (ITU-T G.655),Others
Fibre Count Single
Cladding diameter 80 to 150μm
Coating diameter 100 to 1000μm
Fibre cleaved length 5 to 16mm using Sheath Clamp A, B or 5 to13mm using FH-60-250, FH-60-900
Actual average splice loss 0.02dB with SM, 0.01dB with MM, 0.04dB with DS, 0.04dB with NZDS
Splice time 7sec:SM FAST mode, 12sec :SM AUTO mode, 15sec:AUTO mode
Return loss 60dB or greater
Splicing modes 100 splicer modes are available
Splice loss estimate Several types of core deformations as well as core axis offset are taken into account for accurate loss estimate
Attenuation splice function Intentional high splice loss of 0.1dB to 15dB (0.01dB step) can be made for an inline fixed attenuator
Storage of splice result The last 2000 results to be stored in the internal memory
Magnification X /Y (300X magnification), or both X and Y simultaneously (160X magnification)
Viewing method By two CMOS cameras for intersecting fiber viewing and 4.73 inches TFT colour LCD monitor
Tension test 1.96 to 2.25N
Operating condition 0-5000m above sea level, 0-95% RH and -10 to 50°C respectively
Tube heater Built-in auto-start tube heater with 10 heating modes and up to 20 for reference
Tube heat time 13-15sec. with FP-03 protection sleeve. Total memory of 30 heating modes are available
Applicable protection sleeve length 60mm, 40mm and a series of micro sleeves
No. of splice/heating with battery 200 times of splicing and heat shrinking under with BTR-09
Power supply Auto voltage selection from 100 to 240Va.c. or 10 to 15Vd.c. with ADC-18. 14.8Vd.c. with BTR-09
Terminals USB2.0 ( Mini-B) for data and video signal transfer to PC
Wind protection Up to 15m/s wind velocity
Dimensions

146(W) x 159(D) x 150(H) mm
Including wind protector, monitor, and rubber protector
Excluding rubber foot

Weight 2.5 kg, with ADC-18 AC adaptor
2.7 kg, with BTR-09 battery
Electrode life 3000 arc-discharges


세부


스탠다드 패키지
 

Item Description Model No. Qty
1 Fusion Splicer FSM-80S with CLAMP-S70A 1 pc
2 AC adaptor/battery charger ADC-18 1 pc
3 AC power cord ACC-XX 1 pc
4 Spare Electrodes ELCT2-20A 1 pair
5 Cleaver CT-50 1 pc
6 Battery Pack BTR-09 1 pc
7 USB cable USB-01 1 pc
8 Quick reference guide M-80S/19S-E 1 pc
9 Warning and cautions W-70-E 1 pc
10 Instruction Manual M-70 1 pc
11 Alcohol Pot AP-01 1 pc
12 Battery charge cord DCC-18 1 pc
13 Carrying Case CC-30 1 pc
14 Screw Driver SD-01 1 pc


선택 품목

Description Model No. Note
Fiber holder FH-60-250 For 250um coating
FH-60-900 For 900um coating
FH-60-LT900 For 900um Loose Tube Fiber
FH-60-DC250 For Drop Cable
FH-60-IDC250 For Indoor Cable
FH-FC-20/30 For 2mm/3mm cord
Sheath clamp CLAMP-S70A Coating diameter from 100um to 1000um
(5mm to 16mm cleave)
Included in standard package
CLAMP-S70B 900um diameter loose tube fiber (16mm cleave)
DC power cord DCC-12 For ADC-11/ADC-13/ADC-18
Cigarette lighter socket type
DCC-12 For ADC-11/ADC-13/ADC-18, Alligator clamp type
Primary Coat Stripper PS-02 For single 250um fiber
Hot Jacket Stripper HJS-02 Standard

 


Datasheet to Download

Add your Tags



당신의 생각을 말하고 다른 사람들과 의견을 공유하십시오. 제품에 대한 귀하의 의견에 집중하십시오.



Copyright © 2009-2024 Fiber-MART.COM. All Rights Reserved. Privacy Notice. Terms of Service
Fibermart ISO9001Fibermart Secure Certificate
제품 태그: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Email us