MFG PART#:
Single Jacket Loose Tube FRP Strength Member Outdoor Cable - GYFXTY
These central loose tube optical fiber cables are suitable for installation in aerial, The tube is covered with a layer of aramid yarn as strength member to ensure tensile strength. It is especially suitable for the electromagnetic interfering places because of the non-metal strength member.
Non-metal strength has an excellent anti-electromagnet ability. Loose tube filled with special grease, provide key protection for the fiber. The tube are filled with a water-resistant filling compound to improve the waterproof ability. The cable is completed with a single polyethylene (PE) sheath.
Cable Structure
.jpg) |
Features
Good mechanical and temperature resistant performance. Low dispersion and attenuation. Small diameter, light weight, easy installation. The centrally-situated loose tube minimizes the influence of lateral crush. Two parallel non-metal strength has an excellent anti-electromagnet ability. PE sheath have good ultraviolet radiation resistance.
| | Application
Laying modes: Aerial Electromagnetic interfering places Trunk power transmission system Access network and local network
|
Package
 |  |
| Package 1 | Package 2 |
Package 1: usually for indoor cable, light weight cables.
Package 2: usually for outdoor cable, heavy weight cables
Usually for each roll, the cable length is 2km, but we could provide customized package for different cable lengths. |
Mark
Usually we only attach Test Report on the out package of the cable, but we could also mark as your requirements, such as:
1. Company Name
2. Cross /Net weight
3. Drum No: XX
4. Cable Length : XX
Cable production throughout the chart
| Cable Count | Out Sheath
Diameter | Weight | Minimum Allowable Tensile Strength
(N) | Minimum Allowable Crush Load
（N/100mm) | Minimum Bending Radius
(MM) | Storage
Temperature |
| （MM) | （KG) | short term | long term | short term | long term | short term | long term | （℃） |
| 2 | 7.2 | 75.00 | 1200 | 1500 | 600 | 300 | 20D | 10D | -40+60 |
| 4 | 7.2 | 75.00 | 1200 | 1500 | 600 | 300 | 20D | 10D | -40+60 |
| 6 | 7.2 | 75.00 | 1200 | 1500 | 600 | 300 | 20D | 10D | -40+60 |
| 8 | 7.2 | 75.00 | 1200 | 1500 | 600 | 300 | 20D | 10D | -40+60 |
| 10 | 7.2 | 75.00 | 1200 | 1500 | 600 | 300 | 20D | 10D | -40+60 |
| 12 | 7.2 | 75.00 | 1200 | 1500 | 600 | 300 | 20D | 10D | -40+60 |
| G.652 | 50/125µm | 62.5/125µm |
Attenuation
(+20°C) (dB/km) | @850nm | | ≤3.0 | ≤3.0 |
| @1300nm | | ≤1.0 | ≤1.0 |
| @1310nm | ≤0.36 | | |
| @1550nm | ≤0.22 | | |
| Bandwidth (Class A) (MHz·km) | @850nm | | ≥600 | ≥200 |
| @1300nm | | ≥1200 | ≥600 |
| Numerical Aperture | | 0.200±0.015NA | 0.275±0.015NA |
| Cable Cut-off Wavelength λcc (nm) | ≤1260 | | |
.webp)
