EnglishEspañolFrançaisDeutschPусскийPortuguês日本語한국인
Packet-Optical Transport Platform

Press Esc key to close this popup
  • Packet-Optical Transport Platform

Packet-Optical Transport Platform

Item de produto: #16277
P/N: FM-P-OTP800-11S
US$687.00



Order Today, Ship before 07/11/2022, from U.S. or HK
  • Descrição
  • Ficha dados
  • Outras Observações
  • Tags

2RU 19” FM-P-OTP800-11S Packet-Optical Transport Platform with 8 Slots Available for a Mixed Insertion of System Control, OEO, OLP, TMUX Service Cards

 

Fiber-Mart’s Packet Optical Transport Platform 800 family(FM-P-OTP800 family) is a portfolio of Packet Optical Transport Platforms that offers
operators multi-service delivery solution for a vigorous demands of emerging consumer and business applications without additional costly
fiber optic routes.
The FM-P-OTP800 family mainly includes a series rack mounts and service cards. The rack mounts, based on the latest innovations in packet
and optical technologies, provide tremendous capacity and flexibility that enable a coexistence of different service cards (2.5G/10G OEO, OLP
and 2.5G/10G TMUX ). With a mixed configuration of different service cards, the FM-P-OTP800 family can be the core of a WDM/SDH network
for the extension of transmission distance and management of whole systems .
This model FM-P-OTP800-11S is a 19-inch 2U rack mount design with eight slots, including slot 1 for a system control card; slot 2 to slot 7
for service cards; slot 9 and slot 10 only for housing power supply cards; slot 11 only for housing the fan card. It supports a single redundant
power supply (AC/DC optional).

Key Features

  • High-compact P-OTP optimized for deployment as an optical transport-only platform
  • Supports a mixed and hot-swap insertion of OEO, OLP, 2.5G/10G TMUX service cards.
  • Supports wavelength conversion or optical power amplification of 56 2.5G ports and 28 10G ports in full configuration.
  • Simplify end-to-end service deployment and orchestration across multi-vendor, multi-domain networks.
  • Supports the service flexibility required in today’s rapidly evolving networks.
  • Supports unidirectional transmission over one single fiber, bidirectional transmission over one single fiber or over two fibers etc.

Application

  • WDM systems
  • Sonnet/SDH systems
  • High-speed transmission systems

Rack Mount Specification

Parameter FM-P-OTP800-2S FM-P-OTP800-4S FM-P-OTP800-11S
Dimensions
(Width x Depth x Height)
Standard 1U Rack Mount
(442mmx220mmx44mm)
Standard 1U Rack Mount
(442mmx220mmx44mm)
Standard 2U Rack Mount
(442mmx220mmx88mm)
Weight
(Empty Chassis)
2.6 kg 2.6 kg 3..6 kg
Power Consumption
(Maxi.)
20W 50W 100W
Rated Current 0.2A 0.4A 1A
Power Supply built-in AC220/DC48V(optional) built-in AC220/DC48V(optional) built-in AC220/DC48V(optional)
Slots Note 1 2 slots 4 slots 11 slots
Fans 2-built-in fans 1 pluggable fan
Relative Humidity
(Non- condensation)
-10℃~50℃
Storage Temperature -40℃~85℃
Relative Humidity
(Non-condensation)
5%~95%℃
MTBF 140127 hours

Notes:
1. For FM-P-OTP-11S, Slot 9 and Slot 10 are fixed to house the power supply cards; Slot 11 is fixed to house a pluggable fan card.
2. Fiber-Mart provides freely customized rack mounts in accordance with your special requirements. You can email [email protected] or call us at +1-86-2786-1199 for detailed drawing.

FM-P-OTP800 Service Cards Series

Categories Part NO. Description
System Control Card FM-P-OTP800 2x100Mbit/s Ethernet ports and 2xSFP module slots
OEO card FM-P-OTP800-OEO(2G5) 8x42M/622M/1.25G/2.5GE Wavelength Conversion Board
FM-P-OTP800-OEO(10G) 4x10 Gbit/s Wavelength Conversion Board
CWDM DWDM TMUX Card FM-P-OTP800-TMUX (10G) 8x1.25GE services converged to 1x10G link
FM-P-OTP800-TMUX (2G5) 4x1.25GE services converged to 2x2.5G link with 1+1 protection
Optical Line Protection Card FM-OBP-C 1:1, 1+1, 1-1 node protection

Warm Tips:
1. The specification may be slightly changed without notice
2. Fiber-Mart offers Customize Service Cards for any signals that you need to transport. For more details, please email [email protected] or call us at +1-86-2786-1199.

FM-P-OTP800-11S Platform for Diverse Service Cards


Mechanical Figure of FM-P-OTP800-11S Front Panel


Attention:
1. All the service cards must be installed horizontally in FM-P-OTP800-11S transport platforms.
2. System control card must be installed in slot 1 of FM-P-OTP800-11S.


Typical Application Case




Solution details: 120KM Transmission without any relay stations
The application figure shows the 12 channels of 10G optical signals can be transmitted as unidirectional up to 120km distance through a single standard optical fiber.
1. In location A, standard wavelengths of 12 channels of 10G optical signals are converted into DWDM wavelengths by three FM-P-OTP800-OEO(10G) cards in a FM-P-OTP800-11S platform.
2. Then, 12 channels of 10G DWDM optical signals are multiplexed to a standard single-mode optical fiber by connecting to a DWDM MUX(XMS-1RU-1-FMDWDM)
3. After the 12 channels of optical signals reach Location B, a pre-amplifier ( DWDM-EDFA-PA-XX) will be used to amplify optical power and a DCM( FM-DCM-XX) will be used to compensate the dispersion.
4. The 12 channels of DWDM optical signals will be de-multiplexed by a DWDM DEMUX(XDS-1RU-1-FMDWDM)
5. 12 channels wavelengths of 10G DWDM optical signals are converted to standard wavelengths by three FM-P-OTP800-OEO(10G) cards and received respectively by end devices.
Warm Tips:
a. The above scheme just shows the transmission of one-way data.
b. A system control card (FM-P-OTP800-SC) must be installed in the slot 1 and a optical protection card (FM-OEO800-OLP-1+1) in the slot 2 of FM-P-OTP800-4S platform to manage and protect the whole system.
c. "X" in XMS-RU-1-FMDWDM and XDS-RU-1-FMDWDM means the number of channels; "XX" in DWDM-EDFA-PA-XX indicates the gain value; "XX" in FM-DCM-XX refers to the physical compensation distance.




Rack Mount Specification

Parameter FM-P-OTP800-2S FM-P-OTP800-4S FM-P-OTP800-11S
Dimensions
(Width x Depth x Height)
Standard 1U Rack Mount
(442mmx220mmx44mm)
Standard 1U Rack Mount
(442mmx220mmx44mm)
Standard 2U Rack Mount
(442mmx220mmx88mm)
Weight
(Empty Chassis)
2.6 kg 2.6 kg 3..6 kg
Power Consumption
(Maxi.)
20W 50W 100W
Rated Current 0.2A 0.4A 1A
Power Supply built-in DC48V/220V (optional) built-in DC48V/220V (optional) AC220/DC48V 1+1 redundant power
Slots 2 slots 4 slots 11 slots
Fans 2-built-in fans 1 pluggable fan
Relative Humidity
(Non- condensation)
-10℃~50℃
Storage Temperature -40℃~85℃
Relative Humidity
(Non-condensation)
5%~95%℃
MTBF 140127 hours

Notes:
1. Fan Board is only for FM-P-OTP800-11S
2. Fiber-Mart provides freely customized rack mounts in accordance with your special requirements. You can email [email protected] or call us at +1-86-2786-1199 for detailed drawing.


Datasheet to Download

 

Prazo de entrega

 
FedEx IP: Dentro 1-4 dias úteis
FedEx IE: Dentro 4-6 dias úteis
DHL: Dentro 2-6 dias úteis
EMS: Dentro 4-15 dias úteis
UPS: Dentro 1-3 dias úteis
Hong Kong Post Airmail: Dentro 10-30 dias úteis
 

Forma de pagamento:

 
Paypal or Credit/debit card
Wire Transfer, West Union
20151130134736.jpg
 

Retorna:

 
Retorno satisfatório ou troca de itens
 

Garantia:

 
Garantia de devolução de dinheiro
 

Garantia de qualidade:

 
Garantia limitada
 

Preços por volume:

 
Se você precisar de um grande volume de pedidos, solicite uma conta comercial ou entre em contato conosco para obter políticas preferenciais.
If you need large order volume, please apply for a business account or contact us to enjoy preferential policies.
 
Add your Tags

Optical Transport |


Por favor, diga-nos o que pensa e compartilhe suas opiniões com os outros. Certifique-se de concentrar os seus comentários sobre o produto.




Recently Viewed

Copyright © 2022 Fiber-MART.COM. All Rights Reserved. Privacy Notice
Fiber-MART.COM Secure Certificate
Tags de produto: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9