4 Slots 1RU 19' FM-P-OTP800-4S Packet-Optical Transport Platform

FM SKU#:SKU0388A2
Model#:FM-P-OTP800-4S
MFG PART#:

4 Slots 1RU 19” FM-P-OTP800-4S Packet-Optical Transport Platform for a Mixed Insertion of System Control, OEO, OLP, TMUX Service Cards

Fiber-Mart’s Packet Optical Transport Platform 800 family(FM-P-OTP800 family) is a portfolio of Packet Optical Transport Platforms that offers
operators multi-service delivery solution for a vigorous demands of emerging consumer and business applications without additional costly
fiber optic routes.
The FM-P-OTP800 family mainly includes a series rack mounts and service cards. The rack mounts, based on the latest innovations in packet
and optical technologies, provide tremendous capacity and flexibility that enable a coexistence of different service cards (2.5G/10G OEO, OLP
and 2.5G/10G TMUX ). With a mixed configuration of different service cards, the FM-P-OTP800 family can be the core of a WDM/SDH network
for the extension of transmission distance and management of whole systems .
This model FM-P-OTP800-4S is a 19-inch 1U rack mount design with four slots, including slot 1 for a system control card and other three slots
for service cards. It has 2 built-in fans and supports a single redundant power supply (AC/DC optional).

Key Features

High-compact P-OTP optimized for deployment as an optical transport-only platform

Supports a mixed and hot-swap insertion of OEO, OLP, 2.5G/10G TMUX service cards.

Supports wavelength conversion or optical power amplification of 24 2.5G ports and 12 10G ports in full configuration.

Simplify end-to-end service deployment and orchestration across multi-vendor, multi-domain networks.

Supports the service flexibility required in today’s rapidly evolving networks.

Supports unidirectional transmission over one single fiber, bidirectional transmission over one single fiber or over two fibers etc.

Application

WDM systems

SONNET/SDH systems

High-speed transmission systems

Rack Mount Specification

Notes:
Fiber-Mart provides freely customized rack mounts in accordance with your special requirements. You can email [email protected] or call us at +1-86-2786-1199 for detailed drawing.

FM-P-OTP800 Service Cards Series

Warm Tips:
1. The specification may be slightly changed without notice
2. Fiber-Mart offers Customize Service Cards for any signals that you need to transport. For more details, please email [email protected] or call us at +1-86-2786-1199.

FM-P-OTP800-4S Platform for Diverse Service Cards

Mechanical Figure of FM-P-OTP800-4S Front Panel

Attention:
1. All the service cards must be installed horizontally in FM-P-OTP800-4S transport platforms.
2. System control card must be installed in slot 1 of FM-P-OTP800-4S.

Typical Application Case

Solution details: 120KM Transmission without any relay stations
The application figure shows the 6 channels of 10G optical signals can be transmitted as unidirectional up to 120km distance through a single standard optical fiber.
1. In location A, standard wavelengths of 6 channels of 10G optical signals are converted into DWDM wavelengths by three FM-P-OTP800-OEO (10G) cards in a single FM-P-OTP800-4S platorm.
2. Then, 6 channels of 10G DWDM optical signals are multiplexed to a standard single-mode optical fiber by connecting to a DWDM MUX (XMS-1RU-1-FMDWDM)
3. After the 6 channels of optical signals reach Location B, a pre-amplifier (DWDM-EDFA-PA-XX) will be used to amplify optical power and a DCM( FM-DCM-XX) will be used to compensate the dispersion.
4. The 6 channels of DWDM optical signals will be de-multiplexed by a DWDM DEMUX (XDS-1RU-1-FMDWDM)
5. 6 channels wavelengths of 10G DWDM optical signals are converted to standard wavelengths by three FM-P-OTP800-OEO(10G) cards and received respectively by end devices.
Warm Tips:
a. The above scheme just shows the transmission of one-way data. For bidirectional transmission of data, both Mux in loaction A and DEMUX in location B will be replaced by two MUX DEMUX.
b. A system control card (FM-P-OTP800-SC) must be installed in the slot 1 of FM-P-OTP800-4S platform to manage the whole system.
c. "X" in XMS-RU-1-FMDWDM and XDS-RU-1-FMDWDM means the number of channels; "XX" in DWDM-EDFA-PA-XX indicates the gain value; "XX" in FM-DCM-XX refers to the physical compensation distance.

Rack Mount Specification

Notes:
1. Fan Board is only for FM-P-OTP800-11S
2. Fiber-Mart provides freely customized rack mounts in accordance with your special requirements. You can email [email protected] or call us at +1-86-2786-1199 for detailed drawing.