8 Fasern, MTP zu LC / SC / ST / FC, 9/125 μm Singlemodefaser, 12 Standard - MTP Breakout Harness Cable
MTP ist das hochdichte Glasfaser-Vorverbindungssystem, das im Allgemeinen in drei Bereichen verwendet wird:
Die Daten-Center-Anwendung mit hoher Dichte Umgebung
Die Glasfaser zum Gebäude
Die interne Steckeranwendung in Glasfasergeräten wie Splitter, 40G / 100G SFP und SFP +.
Das MTP-Glasfaser-Patchkabel von Fiber-Mart entspricht dem IEC-61754-7- und TIA-604-5-Standard (FOCIS-5). Es kann weit verbreitet sein für
Fiber-Mart's MTP fiber patch cable is compliant to IEC-61754-7 and TIA-604-5(FOCIS-5) standard. It can be widely used for
10G upgrade to 40G/100G data center.
MTP-Verbindung
|
|
MTP Male with Pins |
MTP Female without Pins |
Two other clearly visible features are the noses and guide grooves (keys) on the top side. The Female and Male need to be used together. |
Vorkonfektionierte MTP Technologie-Polarität Typ B (Cross)
Die obige Anwendung bezieht sich auf das MTP-LC-Kabelbaumkabel, das einen QSFP + -Port direkt mit (4) SFP + -Ports verbindet.
In vielen bestehenden DC-Umgebungen werden LC-MTP-Kabel verwendet, um Glasfaserbündel mit hoher Dichte zwischen Switches, Rack-Patch-Panels und MDA (Main Distribution Cabling Panels) zu unterstützen.
Beispielsweise:
Die oben genannte Acht-Faser-MTP-LC-Baugruppe verwendet an einem Ende einen pinlosen Anschluss für den Anschluss an den QSFP-Anschluss der Cisco Nexus 6000-Serie. Das andere Ende enthält vier LC-Uniboot-Anschlüsse, die die Verbindung zu den SFP + -Ports des Switches ermöglichen. Die Polarität der Baugruppe verbindet die Fasern vom MTP Connector von außen nach innen; somit sind die Faser 1 und die Faser 12 ein Duplex-Paar, ebenso wie die Faser 2 und die Faser 11 usw.
MTP & MPO Unterschied
Der Begriff MTP ist ein eingetragenes Warenzeichen von US Conec, das in Europa derzeit zur Tendenz in den Bereichen der Glasfaser-Kommunikation geworden ist.
MTP 8 Faserverteilung
Notes:
Bitte wählen Sie die beste für Ihr Projekt von oben über die zwei Arten von 8-Faser-MTP Kabelbaum Kabel-Array-Methoden.
Im 40 / 100GbE-Projekt werden 8 optische Fasern benötigt.
Montagestruktur Illustration
12-Fiber Mini-Core Cable structure
MTP-Hybridkabelfaser-Patchkabel sind an einem Ende mit einem MTP-Stecker und am anderen Ende mit LC-, FC-, SC-, ST- oder MTRJ-Anschlüssen versehen, um eine Vielzahl von Glasfaseranforderungen zu erfüllen.
1.Der Standarddurchmesser des MTP-Kabels beträgt 3,0 mm.
2.Der Durchmesser der Abzweigkabel könnte als 0,9 mm, 2,0 mm, bitte kontaktieren Sie uns bei
[email protected] für andere Durchmesser Standard.
3.Fiber-Mart kann auch die ziehen Augen, willkommen, uns zu kontaktieren, wenn Sie brauchen.
MTP/MPO Machinery & Testing Equipment
1 |
Our adopt industry's leading high-performance polishing machine, and complemented by precision plates holders designed for MT ferrules. |
|
2 |
The industry leading device of 3D interferometer provides verification of MTP/MPO polishing process, the interferometer making all parameters of hte polished MT ferrule complies and exceeds industry standards. |
|
3 |
After the 3D interference detection, the flexibility of the tester provides the the complete spectrum of optical testing required for complex and high fiber count cable assemblies. |
MTP Kündigung
Type |
Single mode |
Single mode |
Multi mode |
(APC polish) |
(PC polish) |
(PC polish) |
Fiber count |
8, 12, 24 etc. |
8, 12, 24 etc. |
8, 12, 24 etc. |
Fiber type |
G652D, G657A1 etc. |
G652D, G657A1 etc. |
OM1, OM2, OM3 etc. |
Maximum Insertion Loss |
Elite |
Standard |
Elite |
Standard |
Elite |
Standard |
Low Loss |
Low Loss |
Low Loss |
≤0.35 dB |
≤0.70 dB |
≤0.35 dB |
≤0.70 dB |
≤0.35dB |
≤0.60dB |
Return Loss |
≥60 dB |
≥60 dB |
N/A |
Durability |
≥500 times |
≥500 times |
≥500 times |
Operating Temperature |
-40℃ ~ +80℃ |
-40℃~ +80℃ |
-40℃~ +80℃ |
Test Wavelength |
1310nm |
1310nm |
850nm |
Gemeinsame Kündigung
Type |
Single mode |
Multi mode |
(UPC APC polish) |
(UPC polish) |
Insertion Loss |
≤0.30dB |
≤0.30dB |
Return Loss |
≥55 dB |
≥60 dB |
≥25 dB |
Durability |
≥1000 times |
≥1000 times |
Operating Temperature |
-40℃ ~ +80℃ |
-40℃ ~ +80℃ |
Test Wavelength |
1310nm |
850nm |
Note: Maximum Bandwidths of Different Multimode Fibers
OM1 – 62.5 um Core – 10GBit up to 33 meters, gigabit up to 300m
OM2 – 50 um Core – 10GBit up to 82 meters,gigabit up to 500m
OM3 – 50 um Core, Laser Optimized – 10GBit up to 300 meters,gigabit up to 1000m
OM4 – 50 um Core, Laser Optimized – 10GBit up to 550 meters,gigabit up to 1000m
Zur Bestellung machen
Fiber Type |
Fiber Standard |
Fiber Count |
Cable Type |
Termination |
Cable Length(m) |
Breakout Length 1&2(Inches) |
Breakout Termination |
Polish Type |
OM4
OM3
OS1/2
OM2
OM1 |
12 Fibers |
8~144 Fibers |
LSZH Bunch
LSZH Ribbon
Riser Bunch
Riser Ribbon |
First Connector:
MTP Female
MTP Male |
1~999 |
12~99
(36" is typical) |
3.0mm |
UPC
APC |
24 Fibers |
24~144 Fibers |
Second Connector:
LC Duplex/LC Simplex
SC Duplex/SC Simplex
ST Duplex/ST Simplex
FC Duplex/FC Simplex |
0.9μm (standard)
2.0mm
3.0mm |
Note:Polishing connector (A): PC (multimode), APC 8° (single-mode)
Polishing connector (B) : PC (multimode/single-mode), APC 8° (single-mode)
Furcation length (B): 0.5m/0.3m for 1m total length
Type of protection connector: IP20
Patch cord Type: Minicore cable, round