FM SKU#:SKU00825E2
Model#:200-230SX
MFG PART#:
Large core optical fiber is made from silica glass, which is excellent for transmission of high density optical energy from ultraviolet rays to near infrared rays. Since the core area ratio is larger than telecommunication optical fiber, large light energy such as laser can be transmitted at low attenuation. And since the core diameter is large, inputting the lights to the core can be comparatively easier.
This is a 200/230μm fiber optic indoor cable, the fiber is wrapped by Kevlar Yarn, which could ensure a good performance of tensile strength, and surrounded by 3.0mm outer Jacket.
Item Details
-
Fiber Type: 200/230μm
-
Cable Type: Simplex
-
Cable Diameter: 3.0mm
-
MOQ (Minimum Order Quantity): 2km
Comparison of Large Core Fiber & Traditional Optical Fiber
Large core fiber works in same manner as traditional optical fiber and offers some advantages over some traditional fiber optic designs.
There are physical limitations associated with traditional plastic and glass fibers, both are made in small diameters to maintain flexibility. Therefore, these fibers are gathered in “bunches” to make larger working diameters. Because large core fibers use a single large core, they do a better job coupling light from large focal spot devices. (See illustration below)
Large core fibers are flexible, but not as flexible as the same diameter made from small diameter fibers.
When bent at sharp angles, large diameter fibers are less efficient. (They lose more light than their small diameter fiber counterparts)
Advantages over traditional fiber
In general, large core fiber optic lighting offers the following advantages:
-
More prone to deterioration from UV sources
-
Can be field applied and installed by almost anyone. (no grinding or polishing; but the “cleave” should be uniform and perpendicular to the body of the fiber)
-
More light is transmitted.(within equivalent areas)
-
Better color rendering – more blue light stays in the fiber for longer distances, making the light output look “whiter” and/or “brighter”
-
Approximate the look of neon without the cost
-
Higher temperature resistance than PMMA (Plastic acrylic) fiber (100℃vs 70℃)
-
Available in side emitting type
-
Reduced transmission of IR energy - less heat is transferred.(No filters required)
|
|
Disadvantages
-
More prone to deterioration from UV sources
-
Not so flexible
-
Exposure to water/moisture will corrode the core, making the fiber useless
-
Special jacket is required for outdoor use
-
Prone to chemical metamorphosis within the core; the material becomes less flexible over time
|
Package
 |
 |
|
Package 1 |
Package 2 |
Package 1: usually for indoor cable, light weight cables.
Package 2: usually for outdoor cable, heavy weight cables
Usually for each roll, the cable length is 2km, but we could provide customized package for different cable lengths. |
Mark
Usually we only attach Test Report on the out package of the cable, but we could also mark as your requirements, such as:
1. Company Name
2. Cross /Net weight
3. Drum No: XX
4. Cable Length : XX
Cable production throughout the chart
.webp)
