Tutorial zu Glasfaser-Patchkabeln
Was ist ein Glasfaser-Patchkabel?
Glasfaser-Patchkabel ist ein Glasfaserkabel, das an beiden Enden mit Glasfaseranschlüssen abgeschlossen ist. Es dient zur Verbindung von Geräten und Komponenten in Glasfasernetzwerken und wird auch als Glasfaser-Jumper, Glasfaser-Patchkabel, Glasfaser-Patchkabel usw. bezeichnet. Es gibt viele Arten von Glasfaser-Patchkabeln mit unterschiedlichen Steckertypen, z. B. LC , FC, SC, ST, MU, MTRJ und E2000 usw.
Arten von Glasfaser-Patchkabeln
Es gibt verschiedene Arten von Glasfaser-Patchkabeln, die hauptsächlich nach den Stecker- und Kabeltypen klassifiziert werden können.
Glasfaser-Patchkabel mit verschiedenen Steckertypen
Glasfaser-Patchkabel können nach den Glasfasersteckertypen klassifiziert werden. Beispielsweise wird das LC-Patchkabel nach dem Namen LC-Stecker benannt. Ebenso gibt es SC-, ST-, FC-, MT-RJ-, E2000-, MU- und MPO/MTP-Patchkabel usw. Darüber hinaus gibt es Glasfaser-Patchkabel vom Typ PC, UPC und APC, die sich von den polnischen Typen unterscheiden. Klicken Sie hier für weitere Details: Tutorial zum Glasfaserstecker
LC Patch Cable: LC patch cable is terminated with LC connectors. LC is the short form of Lucent Connector. LC connector is a push and latch structure, with plastic housing and accurate 1.25mm ceramic ferrule. LC type is a popular kind of small form fiber optic patch cable which reduce the space and it is widely used for densely installation. The LC patch cables use a 1.25 mm ferrule, half the size of the ST patch cable. It has good performance and is highly favored for single mode patch cord. LC patch cables comply with IEC, Telcordia, ANSI/EIA/TIA .The connector of LC patch cable is used on 1.6mm/2.0mm as well as 3.0mm cable. There are LC/PC (for multimode), LC/UPC and LC/APC (for single mode) patch cables. An example of LC-LC Patch Cable is shown in the picture on the left. |
ST Patch Cable: ST fiber optic patch cable is terminated with ST connector. ST stands for Straight-Tip and features a Bayonet twist locking mechanism. ST connector has 2.5mm diameter ferrule as in SC connector. It was developed by AT&T and was very popular in the 1980s and 1990s. ST connector has bayonet-style housing and a long spring-loaded ferrule hold the fiber. It is available in both multimode and single mode versions. Horizontally mounted simplex and duplex adapters are available with metal or plastic housing, with a choice of phosphor bronze or zirconia split sleeve. Although there are plastic housing ST connectors, more and more people tend to use metal housing ST. ST fiber optic patch cable has straight tip type terminations and is easy to insert and remove. If you experience high light loss, try to reconnect it. It is rated for 500 mating cycles. ST fiber optic patch cable is one of the older generations, but it is still widely used for multimode networks, including LANs for buildings and campuses. ST-ST Patch Cable is shown in the picture on the left. |
FC Patch Cable: FC fiber optic patch cable is terminated with FC connector, a screw type connection. FC stands for Fixed Connector. Same as SC connector, FC is also invented by NTT. FC is with metal housing, screw structure. FC connector ferrule and sleeves used in FC adaptor are both same as SC ones. FC patch cable is available in both single mode and multimode versions. It is applied in high-vibration environment and can screw on firmly, but you need to have the key aligned in the slot properly before you tighten it. FC-FC Patch Cable is shown in the picture on the left. |
MPO/MTP Patch Cable: MPO patch cable is terminated with MPO connector. The MPO is an high-density multi-fiber connector built around precision molded MT ferrule. It is a push-pull connector compliant IEC 61754-7 and TIA/EIA 604-5A and offers low cost per termination for high density applications. It is usually used in ribbon fiber optic patch cables or ribbon fan out multi fiber assemblies. MPO has multi fiberglass core inside each single connector, that is to say, there are several fiberglass connections in each single MPO patch cable, for example, 12 fiber, 24 fiber, 36 fiber, etc. MTP is upgrade version of MPO. MTP patch cable allows high-density connections between network equipment in telecommunication rooms. It uses a push-pull latching mechanism for easy and intuitive insertion and removal. MTP-MTP Patch Cable is shown in the picture on the left. Click Here For More Details: MPO/MTP Trunk Cables |
Glasfaser-Patchkabel mit verschiedenen Kabeltypen
Glasfaser-Patchkabel können nach verschiedenen Parametern von Glasfaserkabeln klassifiziert werden: Je nach Kabelmaterial gibt es PVC-, Riser-, Plenum-, OFNR-, OFNP-, LSZH- usw. Patchkabel. Entsprechend den Adern der Glasfaser gibt es Simplex- und Duplex-Patchkabel. Simplex-Glasfaser-Patchkabel bestehen aus einer einzelnen Faser, während Duplex-Glasfaser-Patchkabel aus zwei Fasern bestehen. Je nach Art der Glasfaser gibt es Singlemode- und Multimode-Patchkabel. Im Allgemeinen sind Singlemode-Patchkabel mit 9/125 µm Glasfaser gelb, während Multimode-Patchkabel mit OM1 62,5/125 µm oder OM2 50/125 µm Glasfaser orange sind. Darüber hinaus umfassen Multimode-Patchkabel auch die Typen OM3 und OM4. Klicken Sie hier für weitere Details: Single-Mode VS. Multimode-Glasfaserkabel
Darüber hinaus gibt es Multicore-Patchkabel und andere spezielle Glasfaser-Patchkabel wie VF-45-Patchkabel, Glasfaser-Loopback-Kabel, Kunststoff-Glasfaser-Patchkabel, FTTH-Patchkabel, polarisationserhaltende Patchkabel und Mode-Conditioning-Patchkabel.
Glasfaser-Patchkabellösungen von Fiber-Mart
Fiber-Mart bietet alle oben genannten Glasfaser-Patchkabel mit Produkten auf Lager und individuellem Service an. Darüber hinaus bieten wir auch Glasfaser-Pigtails, Tracer-Faser-Patchkabel, Curl-Faser-Patchkabel und andere spezielle Glasfaser-Patchkabel an.
-Beratung für technische Unterstützung oder relevante Kaufratgeber für Produkte
E-Mail an [email protected]
No comments have been posted yet.