Recent Order

12 Fibers Single-Mod...

ship to United States
IP67 MPO Bulkhead Pa...

ship to United States
12 Fibers IP67 MPO t...

ship to United States
FC/APC to LC/APC Sin...

ship to Norway
LC/APC to LC/APC Sin...

ship to United States
LC APC Female to FC ...

ship to Switzerland
12 Fibers ST to ST O...

ship to United States
FC PC Female to FC A...

ship to United States

Optical Fiber Cables
Outdoor Fiber Cables
GYXTW

Custom 24-144 Fibers Outdoor Cable- GYXTW

Description
Datasheet
Tags
FAQ

MFG PART#:

Single Armor Single Jacket Central Loose Tube Waterproof Outdoor Cable- GYXTW

These central loose tube optical fiber ribbon cables are suitable for installation in aerial or duct environment for communication between bureaus, metropolitan network, access network and is especially suitable for the situation where high-density fibers is expected.

The tube is wrapped with a layer of PSP longitudinally,excellent crush-resistant performance. Between the PSP and the loose tube water-blocking material is applied to keep the cable compact and watertight. Two parallel steel wires are placed at the two sides of the steel tape,to ensure tensile strength. The cable is completed with a single polyethylene (PE) sheath.

Cable Structure


Features Light weight, small diameter, easy to lay. Good mechanical and temperature resistant performance. Low dispersion and attenuation. The centrally-situated loose tube minimizes the influence of lateral crush. Good moisture-resistance, water blocking, and flexibility. Two parallel steel wires ensure tensile strength. Good Tensile Strength and Crush Resistance performance, but a little inferior than GYXTW53.		Application Laying modes: Aerial & Conduit/Duct. Bureaus network. Metropolitan network. Access network

Package


Package 1	Package 2
Package 1: usually for indoor cable, light weight cables. Package 2: usually for outdoor cable, heavy weight cables Usually for each roll, the cable length is 2km, but we could provide customized package for different cable lengths.

Mark

Usually we only attach Test Report on the out package of the cable, but we could also mark as your requirements, such as:
1. Company Name
2. Cross /Net weight
3. Drum No: XX
4. Cable Length : XX

Cable production throughout the chart

Cable Count	Out Sheath Diameter	Weight	Minimum Allowable Tensile Strength (N)	Minimum Allowable Crush Load （N/100mm)	Minimum Bending Radius (MM)	Storage Temperature
	（MM)	（KG)	short term	long term	short term	long term	short term	long term	（℃）
2	8.5	85.00	1500	600	1000	300	20D	10D	-40+60
4	8.5	85.00	1500	600	1000	300	20D	10D	-40+60
6	8.5	85.00	1500	600	1000	300	20D	10D	-40+60
8	8.5	85.00	1500	600	1000	300	20D	10D	-40+60
10	8.5	85.00	1500	600	1000	300	20D	10D	-40+60
12	8.5	85.00	1500	600	1000	300	20D	10D	-40+60

	G.652	50/125µm	62.5/125µm
Attenuation (+20°C) (dB/km)	@850nm		≤3.0	≤3.0
@1300nm		≤1.0	≤1.0
@1310nm	≤0.36
@1550nm	≤0.22
Bandwidth (Class A) (MHz·km)	@850nm		≥600	≥200
@1300nm		≥1200	≥600
Numerical Aperture		0.200±0.015NA	0.275±0.015NA
Cable Cut-off Wavelength λcc (nm)	≤1260