Quick Re-Order

fibermart-news_banner_9.jpg

 

Friday 02 August, 2019 | RSS Feed

Chromatic Dispersion in Optical Fibers

by www.fiber-mart.com

Chromatic dispersion is a phenomenon that is an important factor in fiber optic communications.  It is the result of the different colors, or wavelengths, in a light beam arriving at their destination at slightly different times.  The result is a spreading, or dispersion, of the on-off light pulses that convey digital information.  Special care must be taken to compensate for this dispersion so that the optical fiber delivers its maximum capacity.
 
Chromatic dispersion is commonplace, as it is actually what causes rainbows - sunlight is dispersed by droplets of water in the air.  Sir Isaac Newton observed this phenomenon when he passed sunlight through a prism and saw it diverge into a spectrum of different colors.  This dispersion occurs because different colors, or light frequencies, act slightly differently as they pass through a medium such as glass.  In fiber-based systems, an optical fiber, comprised of a core and cladding with differing refractive index materials, inevitably causes some wavelengths of light to travel slower or faster than others.
 
Chromatic dispersion is a serious consideration in long-haul optical fibers.  Its effect is essentially to stretch or flatten the initially sharply-defined binary pulses of information.  This degradation makes the signals (1s and 0s) more difficult to distinguish from each other at the far end of the fiber.  The result is that at any given length, the effective information capacity, or bandwidth, of the fiber optic cable can be significantly reduced.  Dispersion is added as the modulated beam of light, consisting of a number of closely spaced wavelengths, travels down this nearly transparent waveguide.
 
The bottom line is that chromatic dispersion becomes a major consideration and must be accounted for when developing or deploying fiber optic equipment for use in telecommunications, cable TV, or other high-speed optical networks.
 
Fortunately, techniques have been developed that help compensate for the negative effects of chromatic dispersion.  One method involves pre-compensating the signal for the anticipated dispersion before it's sent down the optical fiber.  Another method calls for using dispersion compensating fiber at the end of a length to correct or reverse the dispersion that was realized as the signal traversed the optical fiber.  As a result, these techniques are widely used to help solve the problem of chromatic dispersion.





Other news for Friday 02 August, 2019


View all news for Friday 02 August, 2019 on one page




News for Thursday 01 August, 2019


View all news for Thursday 01 August, 2019 on one page




Recent News




News Archive - See All News from Fiber-Mart.COM


Newsletter
Enter your email for new arrivals, brands and special offers!
Tags: OM3 MPO Cable | OM3 Plastic Adapter | OM3 Patch Cable | OM3 Multimode cable | OM3 MTP Cable | OM3 Loopback Module | OM3 Harness Cable | OM3 MM Cable | OM3 Indoor Cable | OM3 MTP Trunk Cable | OM3 Pigtail | OM3 Loopback Cable | OM3 Cable | OM3 Fiber | OM3 Patch cord | OM3 Multimode Pigtail | OM3 Conditioning Cable | OM3 Fiber Cable | OM3 Duplex Adapter | OM3 Multimode Cable, |
Product Tags: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9