Polarization Maintaining Optical Collimator,PON Laser Source,Polishing Mould,Polishing Epoxy Solvent,PON Optical,Polishing Machine,Polishing Tools,Polarization Maintaining Optical Switch,Polishing Fixture,Polishing Epoxy,PON OLT,Polarization Maintaining Optical Circulator,Polarization Maintaining Polarizer,Polishing Film,Polarization Maintaining Splitter,
CWDM in hybrid access network in the use of the business
With the improvement of people’s living standard, nowadays a single network access gradually cannot satisfy people’s demand for network now, CWDM system support for the characteristics of business more and more get the attention of people, can also provide E, FE, GE, STM 1/4/16 SDH and ATM signaling, CATV video interface and other businesses such as access CWDM system solutions, to meet the requirements of people now.
Radio and television networks in recent business growth is faster in a given area, is the region development education network access project, due to the previous optical fiber network resources is mainly used in cable television network, optical fiber resources is not so rich, many county to the town had no residual fiber resources, to increase the data business, now want to be in the original on the fiber optic cable TV network transmission using again, plus information data signals, or want to lay out the other cable the main work, need to solve as many towns in this area belongs to mountainous area, cable laying is not very convenient, considering various factors such as resources, cost, on the radio and television networks company specialized in CWDM system to conduct a comprehensive performance analysis and product testing.And start in areas such as education network access to a project on each node USES many fiber-mart.com CWDM system equipment.
The radio and television networks of CWDM project at present is mainly used to implement the education network (10/100 MBPS Ethernet) hybrid transmission signals and the cable television network, the current direction of projects with a total of eight different contact, sharing the 3 sets of fiber-mart.com the CWDM system equipment.
In this scenario, A computer room – B node transfer 2 10/100 MBPS data signals and A cable TV signal, which is based on WDM CWDM access, two 10/100 MBPS signals after fiber-mart.com C5002S through fiber-mart.com HA – WDM multiplexer, and cable television signals and reuse all the way to A single fiber, transfer to the access point B region, middle transmission distance of 50 km, implements and Ethernet cable TV signal on the single fiber CWDM module of hybrid transmission.
A room – C nodes use sea pegatron C5002S system combined with high speed and CWDM terminal transceiver effectively cooperate with access, realize two-way 10/100 MBPS of hybrid transmission over A single optical fiber.
A-D-E by fiber-mart.com C5004S system combining various nodes of high speed and the corresponding CWDM transceiver implementation 4 10/100 MBPS signals on A single optical fiber access project, through the high speed connection between each contact, through the terminal CWDM wavelengths optical transceiver connected to A contact switch, after the C5004S system in the computer room 4 different signals, respectively in different wavelengths transmitted to each destination, after D primary school, through high speed download local signal, the remaining 3 to continue down the road signal to the corresponding destination.
Save fiber resources CWDM (Coarse where division multiplexing) Coarse wavelength division multiplexing system, which USES optical multiplexer in the different optical fiber transmission wavelength multiplexing in a single fiber transmission;On the receiving end of A link, using wavelength multiplexer and then revert to the original wavelength, using optical fiber all the way, on the whole link is solved effectively under the condition of the optical fiber resources extremely nervous network access, this scenario, A, D, E, between transmission on A single fiber and four 10/100 MBPS (also can be 1000 MBPS) signal, A room – B node is in the original cable TV signal transmission on A single fiber loading 2 10/100 MBPS signals, save A lot of fiber resources. 2.More business and high bandwidth CWDM is a according to the practical application to the transfer rate of adaptation based transmission platform, support a variety of business transfer.At each wavelength, the support of the business including 10 m / 100 m / 1000 m Ethernet, 155 m / 622 m / 2.5 G of SDH, 155 m / 622 m ATM business, as well as the Fiber Channel business, and so on.The whole system capacity to play a few Gbps data signal.Fully meet user bandwidth requirements in quite some time.This scenario USES is 10/100 MBPS business with cable TV signal for hybrid transmission.
CWDM system than the price of L band DWDM transceiver is relatively low, due to the power of CWDM is small, small volume, easy to use, thus supporting facilities, personnel training and the late maintenance cost is low.Compared with optical cable project: using CWDM device is opened rapidly, low cost, convenient network upgrades, late and increasing need of signal directly, or replace the higher rate of product, don’t need to change the fiber link, convenient network upgrades, reduces the network upgrade costs.The above scenario A-D-E, if change into 1000 MBPS data signals, the capacity of the network directly to upgrade to the 4 GBPS.
CWDM in hybrid access network in the use of the business.
Other news for Saturday 08 December, 2018
News for Friday 07 December, 2018