.webp)
RS485 Converter category:
Passive serial port plate spinning for RS232 to RS485 converter;
Active serial port plate spinning for RS232 to RS485 converter;
The passive photoelectric isolation serial port plate spinning for RS232 to RS485 converter;
Active photoelectric isolation serial port plate spinning for RS232 to RS485 converter;
Address serial port plate spinning for RS232 to RS485 photoelectric isolation converter;
Parameters:
Interface: in accordance with the EIA RS - 232, RS - 485, RS - 422 standard
Working style: asynchronous transmission, point to multipoint, 2 line half duplex, 4 line full duplex
Baud rate: 300 ~ 115200 BPS, automatic detection rate of serial port signals
Direction control: ADDC, automatic identify and control data transmission direction
Photoelectric isolation: 3000 v
Environmental index:
Working temperature: - 20 ℃ to 60 ℃
Humidity: 5% to 95% relative humidity
Appearance index:100mm×69mm×22mm
Shell: the iron shell (wall design, support the DIN- rail installation)
Application Areas:
Industrial automation control systems, remote meter reading system, remote computer monitoring system, entrance guard system, attendance management systems, consumer systems, parking systems, self-service banking system, the bus fee system, highway toll station system, etc.
Recommend products:
1.Fiber Modems Industrial RS-485 to Fiber Converter Single-mode Double-fiber 1310nm SC fiber connector/ST fiber connector/FC fiber connector 20km.
RS-485 fiber optic modem work on 1310nm wavelength using duplex Single-mode optical fibers, SC, ST, FC optical connectors for choice.
Working wavelength: 1310nm
This modems are connected with duplex single-mode fiber
RS-485 port support 32 node ( customers can choice handtailor 128 Node)
Support EIA RS-485 standard
Asynchronous point to point rate up to 500kb/s ( RS-485)
Support 9V~40V DC Volt input, consumption 2W1500W surge protection, 15KV static protection
Auto test signal rate, zero delay auto transmit
Transmit distance: RS-485 port 1.5km, optical port multi-mode 2km, single-mode 20km
2.Fiber Modems Industrial RS-485/RS-422 to Fiber Converter Single-mode Single-fiber 1310nm SC/ST/FC 20KM
RS-422/RS-485 fiber optic modem work on 1310nm wavelength using simplex single-mode optical fibers, SC, ST, FC fiber optic connectors for choice.
RS422/RS485 interfaces fiber modem meet EIA/RS-422 and RS-485 transmission standards at data rates up to 500kb/s.
Passive serial port plate spinning for RS232 to RS485 converter;
Active serial port plate spinning for RS232 to RS485 converter;
The passive photoelectric isolation serial port plate spinning for RS232 to RS485 converter;
Active photoelectric isolation serial port plate spinning for RS232 to RS485 converter;
Address serial port plate spinning for RS232 to RS485 photoelectric isolation converter;
Parameters:
Interface: in accordance with the EIA RS - 232, RS - 485, RS - 422 standard
Working style: asynchronous transmission, point to multipoint, 2 line half duplex, 4 line full duplex
Baud rate: 300 ~ 115200 BPS, automatic detection rate of serial port signals
Direction control: ADDC, automatic identify and control data transmission direction
Photoelectric isolation: 3000 v
Environmental index:
Working temperature: - 20 ℃ to 60 ℃
Humidity: 5% to 95% relative humidity
Appearance index:100mm×69mm×22mm
Shell: the iron shell (wall design, support the DIN- rail installation)
Application Areas:
Industrial automation control systems, remote meter reading system, remote computer monitoring system, entrance guard system, attendance management systems, consumer systems, parking systems, self-service banking system, the bus fee system, highway toll station system, etc.
Recommend products:
1.Fiber Modems Industrial RS-485 to Fiber Converter Single-mode Double-fiber 1310nm SC fiber connector/ST fiber connector/FC fiber connector 20km.
RS-485 fiber optic modem work on 1310nm wavelength using duplex Single-mode optical fibers, SC, ST, FC optical connectors for choice.
Working wavelength: 1310nm
This modems are connected with duplex single-mode fiber
RS-485 port support 32 node ( customers can choice handtailor 128 Node)
Support EIA RS-485 standard
Asynchronous point to point rate up to 500kb/s ( RS-485)
Support 9V~40V DC Volt input, consumption 2W1500W surge protection, 15KV static protection
Auto test signal rate, zero delay auto transmit
Transmit distance: RS-485 port 1.5km, optical port multi-mode 2km, single-mode 20km
2.Fiber Modems Industrial RS-485/RS-422 to Fiber Converter Single-mode Single-fiber 1310nm SC/ST/FC 20KM
RS-422/RS-485 fiber optic modem work on 1310nm wavelength using simplex single-mode optical fibers, SC, ST, FC fiber optic connectors for choice.
RS422/RS485 interfaces fiber modem meet EIA/RS-422 and RS-485 transmission standards at data rates up to 500kb/s.
No comments have been posted yet.