LC to SC Fiber Patch Cords Solution

Fiber-Mart's LC to SC Fiber Patch Cords

Fiber-Mart's LC to SC fiber patch cords are made and customized to order worldwide and are fully tested to guarantee top performance. Each cable assembly is serialized for easy idenfication ANS sealed in individual Ziploc bags. Test results are included in each order. They are constructed with high quality fiber glass abd high grade connectors with ceramic ferrules for increased durability and accuracy.

Fiber-Mart offers all types of LC to SC fiber optic patch cords. These feature various cable jacket types and are normally in stock for immediate shipping. LC/SC jumpers are ready to GO!

Fiber-Mart offer a complete selection of LC to SC fiber optic cable assemblies, these LC-SC fiber cords including single mode and multimode types, in simplex and duplex versions. Cables jacket can be Riser rated or Plenum rated, with LSZH cable and PVC options, and are all RoHS compliant cables.

LC part of the fiber optic cable is the compact small form factor LC fiber optic connector. It feature the RJ-45 style interface with low insertion loss and low back reflection, it is with high precision alignment and is widely used all over the world. We supply both simplex LC cable and duplex LC cable. The connector is with a 1.25mm O.D zirconia ceramic ferrule; LC fiber cable can be 9/125 single mode or 50/125 multimode or 62.5/125 multimode, PC, UPC or APC end face. It is compliant to Telcordia, EIA/TIA and IEC standards.

SC part of the fiber optic cable is the snap-in SC fiber optic connector. SC connector features with low price, involve loss small ripple, high compressive strength and high density installation. It is with a 2.5mm ferrule that is widely used for its excellent performance. The end face of the pin is used more PC or APC model grinding method, fastening way is to use the plug pin bolt type, do not need to rotate.

Options about Our LC-SC Fiber Patch Cords

Common Types

Other Types

LC-SC Armored Patch Cords: Armored fiber optic patch cords retain all the features of standard patch cords, but are much stronger. Armored fiber optic patch cords will not get damaged even if stepped by an adult and they are rodent-resistant. By using an armored patch cord you don't need to worry about rodents like rats that may bite the cables. Armored fiber optic cables are strong; they are actually as flexible as standard fiber optic patch cords. Armored fiber optic patch cords are made a with similar outer diameter to standard patch cords, make them both space saving and strong. What's more, they can be made with different jacket colors and jacket types such as OFNR etc.

LC-SC Multi-Core Patch Cords: Multi core fiber patch cords are individually reinforced fibers terminated with fiber optic connectors. When the optical fber is terminated on both ends it is termed as patch cord. The multi core patch cord is widely used for CATV, LANS, Telecom, Vido, active device termination, telecommunication networks and Gigabit. 2-288 cores are optional and the sub-branch can be 0.9 mm and 2.0 mm.

LC-SC Mode-Conditioning Patch Cords: Mode conditioning patch cords are made to allow Gigabit 1000BASE-LX single mode equipment, such as routers and switches, to be used on existing 62.5µm or 50µm multimode cable plants. Mode conditioning fiber jumpers are used in the 1300nm or 1310nm optical wavelength window, and should not be used for 850nm short wavelength window such as 1000BASE-SX. Also, any attempt to connect 1000BASE-LX/LH equipment over short distances of multimode fiber without the use of mode conditioning fiber will result in a high bit error rate, and eventually damage to the device.

Featured Products

Bulk Fiber Optic Cables OM3, OM4 Fiber, Tight Buffer, Indoor & Outdoor, LSZH, Figure8, ADSS Fiber Cables

CWDM MUX/DEMUX 1-18CH(20nm spaced), Plastic ABS, 19rack, LGX Box, connectors with FC, ST, SC, LC, etc.

Fiber Optic Transceivers SFP, SFP+, XFP, XENPAK, DWDM, CWDM, QSFP+ & CFP Modules