MTP/MPO System Solution

Fibermart
Sunday 24 May, 2015
122
0

Click to Buy Fiber Optic Patch Cables from Fiber-Mart

MTP/MPO system is a truly innovative and amazing group of products that really takes fiber optics into the new millennium. It is ideal for many applications such as disaster recovery, backbones, building fiber optic distribution, quick setup of new wiring hubs, and warehouses etc. For example, it is possible to run a single cable that automatically terminates 12 fibers in one easy plug-in. With MTP/MPO system you can install a 12-strand fiber optic cable from your main distribution location to a sub distribution location. The installation has never been easier!

MTP Connector

MTP connector is a high performance MPO connector engineered for better mechanical and optical performance. The MPO connector is the industry acronym for "Multi-fiber Push On", with push-on insertion release mechanism, provides consistent and repeatable interconnections and available with 4, 8, 12, or 24 fibers. The MTP/MPO is a connector manufactured specifically for a multi-fiber ribbon cable. The MTP/MPO single-mode connectors have an angled ferrule allowing for minimal back reflection, whereas the multimode connector ferrule is commonly flat. The ribbon cable is flat and appropriately named due to its flat ribbon-like structure, which houses fibers side by side in a jacket.

Advantages Of MTP Connectors

There are many advantages of MTP connectors: Its housing is removable. This feature allows the customer to: Re-work and re-polish the MT ferrule; change the gender after assembly or even in the field; scan the ferrule interferometrically after assembly. It offers ferrule float to improve mechanical performance. This allows two mated ferruled to maintain physical contact while under an applied load. It uses tightly held tolerance stainless steel guide pin tips with an elliptical shape. The elliptical shaped guide pin tips improves guidance and reduces guide hole wear. It has a metal pin clamp with features for centering the push spring which eliminates lost pins, centers spring force, and eliminates fiber damage from spring. Its spring design maximizes ribbon clearance for twelve fiber and multi-fiber ribbon applications to prevent fiber damage.

It is offered with 3 standard variations of strain relief boots to meet a wide array of applications and is ideal for use in space limited applications.Round, loose fiber cable constructions oval jacketed cableBare ribbon fiberShort boot which reduces the footprint by 45%

Termination Performance of MTP/MPO Assemblies

Type/Performance	Singlemode(APC polish)		Multimode(PC / Flat Polish)
	Standard	Elite Low Loss	Standard	Elite Low Loss
Maximum Insertion Loss	≤ 0.75dB	≤ 0.35dB	≤ 0.60dB	≤ 0.35dB
Return Loss	≥ 50dB		N/A
Operating Temperature	-40°C to 80°C		40°C to 80°C
Test Wavelength	1310nm		850nm

Fiber-Mart'S MTP/MPO Pre-Terminated High-Density Multi-Fiber Cable Solutions

Fiber-Mart provides a series of MTP/MPO pre-terminated high-density multi-fiber cable solutions. The MTP/MPO cable assemblies include MTP/MPO Trunk Cables, MTP/MPO Harness Cables, and MTP/MPO Easy Plug-and-Play Cassettes.

MTP/MPO Trunk Cables

Fiber-Mart's MTP/MPO trunk cables are available with 12-, 24-, 36-, 48-, 72-, 96-, and 144-fiber options.

MTP/MPO Harness Cables

Fiber-Mart's MTP/MPO harness cables are available with 8-, 12-, 24-, 36-, 48-, 72-, 96- and 144-fiber optionsMPO/MTP on one end, with single-fiber connectors on another end MPO/MTP connector in 8 or 12-fiber interface forchoices Fiber counts available in 8 / 12-fibers Single-fiber connector interface available in FC, SC, ST, LC, MTRJ, E2000 etc. Simplex or Duplex channeling Customized furcation length to cater for differentinstallation situations Ruggedized furcation legs: Round fanout kit with 2.0 mm or 3.0 mm legs to single-fiber connectors

MTP/MPO Plug-and-Play Cassettes

MTP/MPO cassettes are designed for Plug-and-Play applications. Available with single-mode and multimode fiber options Standard cassettes can accommodate 12 and 24 port configurations Available different sizes Available with all fiber modes and connector options

Other Special MTP/MPO Products

MTP/MPO Rack Mount

MTP/MPO 1RU horizontal rack mount cassette holder is manufactured with the following features: Holds 3 LGX Cassettes for 12 or 24 fiber MTP Cassettes Multiple internal mounting holes for cable tie-down, fiber management Rack mounting Available in 1RU, 2RU, 3RU, and 4RU Configurations, height 19" mount converts to 23" frame Hinged front doors, screw down top

MTP/MPO Adapters

Features: MPO style to MPO style With a wide variety of options including Color and Dust Caps Use in Singlemode or Multimode applications Free-hanging or panel-mount design Dust caps protect against debris and contamination RoHS Compliant

MTP/MPO Loopback

Features: MTP/MPO Female Connectors US Connect MTP/MPO connectors with pull-release Fully compliant to MTP/MPO specifications Supports 40/100GbE and InfiniBand applications ROHS Compliant Fiber Type Options: OM3