22m Cat6A Snagless Shielded Twisted Pair Molded Patch Cable

22m Cat6A Snagless Shielded Twisted Pair Molded Patch Cable

Cat6a Ethernet cables are typically used in server/network rooms for plugging between patch panels. This is not to say one cannot use them for other purposes such as connecting a Cable or DSL modem to a router/switch in the home or office.Cat6a was developed to achieve maximum distance of 90 meters for full 10-Gigabit network speeds. This robust spec will afford you the extra headroom across your network that Cat6 can not. The 500 Mhz performance is double that of Category 6 and five times the bandwidth capacity of Category 5e.

Key Features

• Designed to optimize the transmission performance of your equipment
• Improves the signal strength of your high speed network
• Bandwidth up to 650 MHz
• Designed for Network Adapters, Hubs, Switches, Routers, DSL/Cable Modems, Patch Panels and other twisted-pair applications
• For use in networks through 10-Gigabit
• UL certified and meets TIA/EIA standards
• Snagless design

Specifications

• End 1: CAT6a Male Plug
• End 2: CAT6a Male Plug
• Wire: 24 AWG
• Insulation : PVC
• Connector:RJ45 Male
• Conductor Material：Bare Copper

Applications

• Cable features strain relief and a Snagless boot
• Snagless Bubble style boots enable the user to pull a cable without the crimp lever catching on other cables or equipment
• 50 micron gold plating for clean data transmission