Recent Order
|
FM SKU#:SKU0388A2
Model#:FM-P-OTP800-4S MFG PART#: 4 Slots 1RU 19” FM-P-OTP800-4S Packet-Optical Transport Platform for a Mixed Insertion of System Control, OEO, OLP, TMUX Service CardsFiber-Mart’s Packet Optical Transport Platform 800 family(FM-P-OTP800 family) is a portfolio of Packet Optical Transport Platforms that offersoperators multi-service delivery solution for a vigorous demands of emerging consumer and business applications without additional costly fiber optic routes. The FM-P-OTP800 family mainly includes a series rack mounts and service cards. The rack mounts, based on the latest innovations in packet and optical technologies, provide tremendous capacity and flexibility that enable a coexistence of different service cards (2.5G/10G OEO, OLP and 2.5G/10G TMUX ). With a mixed configuration of different service cards, the FM-P-OTP800 family can be the core of a WDM/SDH network for the extension of transmission distance and management of whole systems . This model FM-P-OTP800-4S is a 19-inch 1U rack mount design with four slots, including slot 1 for a system control card and other three slots for service cards. It has 2 built-in fans and supports a single redundant power supply (AC/DC optional). Key FeaturesApplicationRack Mount Specification
Notes: Fiber-Mart provides freely customized rack mounts in accordance with your special requirements. You can email [email protected] or call us at +1-86-2786-1199 for detailed drawing. FM-P-OTP800 Service Cards Series
Warm Tips: 1. The specification may be slightly changed without notice 2. Fiber-Mart offers Customize Service Cards for any signals that you need to transport. For more details, please email [email protected] or call us at +1-86-2786-1199. FM-P-OTP800-4S Platform for Diverse Service CardsMechanical Figure of FM-P-OTP800-4S Front Panel Attention: 1. All the service cards must be installed horizontally in FM-P-OTP800-4S transport platforms. 2. System control card must be installed in slot 1 of FM-P-OTP800-4S. Typical Application CaseSolution details: 120KM Transmission without any relay stations The application figure shows the 6 channels of 10G optical signals can be transmitted as unidirectional up to 120km distance through a single standard optical fiber. 1. In location A, standard wavelengths of 6 channels of 10G optical signals are converted into DWDM wavelengths by three FM-P-OTP800-OEO (10G) cards in a single FM-P-OTP800-4S platorm. 2. Then, 6 channels of 10G DWDM optical signals are multiplexed to a standard single-mode optical fiber by connecting to a DWDM MUX (XMS-1RU-1-FMDWDM) 3. After the 6 channels of optical signals reach Location B, a pre-amplifier (DWDM-EDFA-PA-XX) will be used to amplify optical power and a DCM( FM-DCM-XX) will be used to compensate the dispersion. 4. The 6 channels of DWDM optical signals will be de-multiplexed by a DWDM DEMUX (XDS-1RU-1-FMDWDM) 5. 6 channels wavelengths of 10G DWDM optical signals are converted to standard wavelengths by three FM-P-OTP800-OEO(10G) cards and received respectively by end devices. Warm Tips: a. The above scheme just shows the transmission of one-way data. For bidirectional transmission of data, both Mux in loaction A and DEMUX in location B will be replaced by two MUX DEMUX. b. A system control card (FM-P-OTP800-SC) must be installed in the slot 1 of FM-P-OTP800-4S platform to manage the whole system. c. "X" in XMS-RU-1-FMDWDM and XDS-RU-1-FMDWDM means the number of channels; "XX" in DWDM-EDFA-PA-XX indicates the gain value; "XX" in FM-DCM-XX refers to the physical compensation distance. Rack Mount Specification
Notes: 1. Fan Board is only for FM-P-OTP800-11S 2. Fiber-Mart provides freely customized rack mounts in accordance with your special requirements. You can email [email protected] or call us at +1-86-2786-1199 for detailed drawing. Datasheet to Download Add your TagsOTP800 |Recently ViewedRecommended products |