10/100/1000M Dual Fiber 1550nm 100km Ethernet Fiber Media Converter

Fiber Media Converter 10/100/1000M Dual Fiber 1550nm 100km

Media converters can be used anywhere in the network to integrate newer technology with existing equipment to support new applications, technologies and future growth. Instead of costly, across-the-board upgrades, media converters can extend the productive life of the existing cabling as well as the active equipment.

Fiber-Mart.COM supply 10/100Base Ethernet Fiber Media Converters, 1000Base Gigabit Fiber Media Converter,SFP Fiber Media Converter, Options in singlemode dual fiber, multimode dual fiber and singlemode single fiber. We also supply Media Coverter Chassis, like 14 slot media converter chassis and 16 slot media converter chassis, used to manage the various media converters.

Features

• AutoCross™: Automatically detects and configures the twisted pair port on the converter to the correct MDI or MDI-X configuration.
• Link Pass Through: Link Pass Through is a troubleshooting feature that allows the media converter to monitor both the fiber and copper RX ports for loss of signal.
• Automatic Link Restoration: The media converters will automatically re-establish link in all network conditions.
• Selectable speed setting: The converter can be set to 10Mbps or 100Mbps or 1000Mbps. Both copper and fiber ports are automatically set to the same speed. Devices connect to duplex mode of link partner.
• Jumbo Frames is available for the 10/100/1000M media converter with 1 RJ45 port + 1 fiber port. Any questions, please feel free to contact us at [email protected] for more details.

Key Features

• 10/100/1000Mbps auto-negotiation
• Supports IEEE 802.3x full-duplex flow control and back pressure half-duplex flow control
• Supports MAC self-learning
• Standards: IEEE802.3, IEEE802.3u, IEEE802.3x, 10/100Base-TX, 100Base-FX, 10/100/1000Base-TX, 1000Base-FX/LX
• LED status of Link, activity, Full/half duplex, speed and power on diagnostic function
• Extremely low power consumption and low heat
• Reliable and stable performance

Applications:

10/100/1000 Ethernet Network Distances
It use the 10/100/1000BASE-T to 1000BASE-X speed setting (back-to-back) to extend the distance between two 1000BASE-T devices up to 100km. using single mode fiber without a repeater.

Specifications

Note: Port Base VLAN is optional, please contact [email protected] for more details.
 

• UTP Port: 1-port RJ45
• UTP Rate: 10/100/1000Mbps
• Fiber Port: Duplex SC, ST, FC available
• Fiber Rate: 1000Mbps
• Fiber Wavelength: 1550nm
• Fiber Mode: Single-mode
• Distance: 100km
• LED Indicator: TX LINK, FX LINK, TX ACT, FX ACT, PWR, FDX.
• Power Supply: External or Built-in
• Working Temperature: -20°C~75°C
• Relative Humidity: 5%~90%
• Dimension (mm): 26*70*95 （with external power), 30*110*140 (with built-in power)