Quick Re-Order

fibermart-news_banner_9.jpg

 

Wednesday 27 November, 2019 | RSS Feed

AN INTRODUCTION TO WDM TECHNOLOGY

by www.fiber-mart.com

WDM technology can be a reliable, cost-effective method of solving fiber exhaust problems and expanding bandwidth across campuses, municipalities, school districts, and other networks. In our first installment, we covered the basics behind the technology and how it works. In this installment, we will discuss how to begin deciding which WDM is right for you, as well as addressing some common misconceptions about this incredibly valuable technology.
 
CWDM or DWDM?
Deciding between CWDM and DWDM is a complex issue, with many network- and application-specific variables that need to be considered. While we recommend a consultation with an expert to get a definitive answer, here are some preliminary considerations:
 
Common Misconception 1: WDM is extremely expensive to install.
For many network operators, the concept of “WDM” is inextricably linked with large, complex active line systems that cost hundreds of thousands of dollars. For most applications, this is a case of upselling by their OEMs. In fact, you can reap many of the benefits much more cost-effectively with a passive filter system. Passive CWDM and DWDM systems can be monitored via a tap port on the faceplate of most mux/demuxes.
 
Common Misconception 2: WDM can only cover long distances.
Network operators are often discouraged from adopting passive WDM system because the rated distances of the transceivers are much longer than required. For example, the shortest rated distance for CWDM transceivers is 40km, and 80km for DWDM transceivers. Is it still possible to use these optics if your campus is only, say, 8km, or even 100m apart?
 
The answer is yes! With the proper level of attenuation on the transmitting side of your transceivers, you can still deploy a passive WDM solution to add services and conserve fiber.
 
Further Reading
For more information about different WDM strategies and how to use them, you can check out our coverage on our ZS line of standard passives, this application note on some simple passive architectures, and an overview WDM strategies using a single strand of common fiber.
 
You can also schedule a consultation with our experts, who will walk you through your options step by step and find the perfect solution for your network.





Other news for Wednesday 27 November, 2019


View all news for Wednesday 27 November, 2019 on one page




News for Monday 25 November, 2019


View all news for Monday 25 November, 2019 on one page




Recent News




News Archive - See All News from Fiber-Mart.COM


Newsletter
Enter your email for new arrivals, brands and special offers!
Tags: POF Cord | Polarization Beam | PM coupler | Polarity B Cable | Polarization Circulator | POE Switch | POF Patch Cord | Pliers KS 318 | Plenum Patch Cable | Plenum Fiber Cable | PM Optical Circulator | PM Patchcord | PM SMF | Plenum Cable | PM Filter | PM PLC Splitter | PM Patch Cable | Polarity Tester | PoE APD1200 | PM Patch Cord |
Product Tags: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9