EnglishEspañolFrançaisDeutschPortuguês日本語한국인
Blog Filter
Solutions
See more
See less
Product
See more
See less
Recent Order

Brief introduction of FTTx Network

  • Brief introduction of FTTx Network Fiber-Mart.com
  • Post on Sunday 04 June, 2017
  • 462
  • 0

 As we know, compared to copper or digital radio, fiber’s high bandwidth and low attenuation easily offset its higher cost. To install fiber optics all the way to the home or the users’ working places has always been the goal of fiber optic industry. 


Concept of FTTx
 
A simple understanding of FTTx is Fiber to the x, x here can be replaced such as H for home, B for building, C for curb or even W for wireless etc. It is a new technology used in today’s network. As we know, compared to copper or digital radio, fiber’s high bandwidth and low attenuation easily offset its higher cost. To install fiber optics all the way to the home or the users’ working places has always been the goal of fiber optic industry. Thanks to optical fiber all the way to subscriber, we can get unprecedented higher speed in enjoying more services at home, such as teleworking, tele-medicine, online shopping and so on. It is precisely because the demands for bandwidth keeps spiraling upwards, FTTx technology now is very popular with people and has to be imperative.
 
FTTx Enabling Technologies
 Duplex Fiber Patch Cable FTTH Drop Cable FRP G652D PVC
Architectures
According to the different termination place, the common FTTx architectures include these following types:
 
1. FTTC: Fiber To The Curb (or Node, FTTN)
 
Fiber to the curb brings fiber to the curb, or just down the street, close enough for the copper wiring already connecting the home to carry DSL (Digital Subscriber Line). Actually, FTTC bandwidth depends on DSL performance where the bandwidth declines over long lengths from the node to the home. Though the cost of FTTC is lower than FTTH in the first time installation, it is limited by the quality of the copper wiring currently installed to or near the home and the distance between the node to the home. Thus, in many developed, FTTC is now gradually upgrade to FTTH.
 
2. FTTH Active Star Network
 
FTTH active star network means that a home run active star network has one fiber dedicated to each home. It is the simplest way to achieve fiber to the home and offers the maximum amount of bandwidth and flexibility. However, this architecture generally needs a higher cost, as the requirements of the both in electronics on each end and the dedicated fibers for each home.
 
 
The FTTH architecture consists of a passive optical network (PON) that allows several customers to share the same connection, without any active components (i.e., components that generate or transform light through optical-electrical-optical conversion). In this architecture, it usually needs a PON splitter. PON splitter is bi-directional, that is signals can be sent downstream from the central office, broadcast to all users, and signals from the users can be sent upstream and combined into one fiber to communicate with the central office. The PON splitter is an important passive component used in FTTH networks. There are mainly two kinds of passive optical splitters: one is the traditional fused type splitter as known as FBT coupler or FBT WDM optical splitter, which features competitive price; the other is the PLC splitter based on the PLC (Planar Lightwave Circuit) technology, which has a compact size and suits for density applications. Because it cuts the cost of the links substantially by sharing, this architecture is more prefered by people when choosing the architecture.
 
FTTx/PON Protocols
 
There are two major current PON standards: GPON(gigabit-capable PON) and EPON(Ethernet PON). The fomer uses IP-based protocol, based originally on ATM protocols but in its latest incarnation using a custom framing protocol GEM. EPON is based on the IEEE standard for Ethernet in the First Mile, targeting cheaper optical components and native use of Ethernet. In addition, there is BPON(broadband PON), was the most popular current PON application in the beginning. It also uses ATM as the protocol (BPON digital signals operate at ATM rates of 155, 622 and 1244 Mb/s).
 
Future Trends
 
Doubtless, FTTx technology will continue to spread. With the higher and higher requirement of the network speeds, the requirement of FTTx is also improved both in technology and cost saving. And the next generation of PONs, such as 10G GEPON, WDM PON etc. also play an important role in the FTTx development. Maybe one day, we could enjoy the FTTd, ie. fiber to the desk and enjoy a avariety of modern network services.
Comments: (0)

No comments have been posted yet.

Leave a Comment
You must be logged in to submit a comment.
Copyright © 2009-2024 Fiber-MART.COM All Rights Reserved. Privacy Notice. Terms of Service
Fibermart ISO9001Fibermart Secure Certificate
Product Tags: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Email us