EnglishEspañolFrançaisDeutschPortuguês日本語한국인
Blog Filter
Solutions
See more
See less
Product
See more
See less
Recent Order

Optical Amplifier Tutorial

  • Optical Amplifier Tutorial Fiber-Mart.com
  • Post on Tuesday 12 June, 2018
  • 626
  • 0

Fiber-Mart WDM-Optical-Network-Banner.jpg

 

What Is Optical Amplifier?

 

Optical Amplifier is a device referred to as a repeater accomplished the re-amplification where optical signal is attenuated when traveling through an optical fiber in long-distance applications. While the technology available today eliminates the need for repeaters, the optical amplifiers are now used instead of repeaters. An optical amplifier can amplify optical signal directly without electric and electric optical transformation. The originally dominating application of fiber amplifiers was in optical fiber communications over large distance, where signals need to be periodically amplified, with the developments of optical amplifier, there are more and more types to choose for customers' different needs, even some high-power fiber amplifiers are now used in laser material processin.

Tips: A repeater is basically a receiver and transmitter combined in one package. The receiver converts the incoming optical energy into electrical energy. The electrical output of the receiver drives the electrical input of the transmitter. The optical output of the transmitter represents an amplified version of the optical input signal plus noise.

 

Main Types of Optical Amplifiers

 

Doped fiber amplifier (eg. EDFA (Erbium-Doped Fiber Amplifier)) Semiconductor optical amplifier (SOA) Fiber Raman amplifier (eg. DRMA) Fiber optical parametric amplifier (FOPA)

Doped Fiber Amplifier (eg. EDFA)

 

The first is Doped Fiber Amplifier. Stimulated emission in the amplifier's gain medium causes amplification of incoming light. The most common version is Erbium-Doped Fiber Amplifier (EDFA). EDFA Amplifier is generally used for very long fiber links such as undersea cabling. It uses a fiber that has been treated or "doped" with erbium, and this is used as the amplification medium.

The pump lasers operate at wavelength below the wavelengths that are to be amplified. The doped fiber is energized with the laser pump. As the optical signals is passed through this doped fiber, the erbium atoms transfer their energy to the signal, thereby increasing the energy or the strength of the signal as it passes. With this technique, it is common for the signal to be up to 50 times or 17dB stronger leaving the EDFA than it was when it entered. EDFA may also be used in series to further increase the gain of the signal. Two EDFA amplifiers used in series may increase the input signal as much as 34dB.

Principle: A relatively high-powered beam of light is mixed with the input signal using a wavelength selective coupler. The input signal and the excitation light must be at significantly different wavelengths. The mixed light is guided into a section of fiber with erbium ions included in the core. This high-powered light beam excites the erbium ions to their higher-energy state. When the photons belonging to the signal at a different wavelength from the pump light meet the excited erbium atoms, the erbium atoms give up some of their energy to the signal and return to their lower-energy state. A significant point is that the erbium gives up its energy in the form of additional photons which are exactly in the same phase and direction as the signal being amplified. So the signal is amplified along its direction of travel only. This is not unusual - when an atom "lases" it always gives up its energy in the same direction and phase as the incoming light. Thus all of the additional signal power is guided in the same fiber mode as the incoming signal.There is usually an isolator placed at the output to prevent reflections returning from the attached fiber. Such reflections disrupt amplifier operation and in the extreme case can cause the amplifier to become a laser. The erbium doped amplifier is a high gain amplifier.

 

Semiconductor Optical Amplifier (SOA)

 

SOA Amplifier uses a semiconductor to provide the gain medium. These amplifiers have a similar structure to Fabry–Pérot laser diodes but with anti-reflection design elements at the end faces. Recent designs include anti-reflective coatings and tilted wave guide and window regions which can reduce end face reflection to less than 0.001%. Since this creates a loss of power from the cavity which is greater than the gain, it prevents the amplifier from acting as a laser.

SOA amplifiers are typically made from group III-V compound semiconductors such as GaAs/AlGaAs, InP/InGaAs, InP/InGaAsP and InP/InAlGaAs, though any direct band gap semiconductors such as II-VI could conceivably be used. Such amplifiers are often used in telecommunication systems in the form of fiber-pigtailed components, operating at signal wavelengths between 0.85 µm and 1.6 µm and generating gains of up to 30 dB.

High optical nonlinearity makes SOA amplifiers attractive for all optical signal processing like all-optical switching and wavelength conversion. There has been much research on SOA amplifiers as elements for optical signal processing, wavelength conversion, clock recovery, signal demultiplexing, and pattern recognition.

Compared with EDFA: The SOA amplifier is of small size and electrically pumped. It can be potentially less expensive than the EDFA and can be integrated with semiconductor lasers, modulators, etc. However, the performance is still not comparable with the EDFA. The SOA has higher noise, lower gain, moderate polarization dependence and high nonlinearity with fast transient time. The main advantage of SOA is that all four types of nonlinear operations (cross gain modulation, cross phase modulation, wavelength conversion and four wave mixing) can be conducted. Furthermore, SOA can be run with a low power laser. This originates from the short nanosecond or less upper state lifetime, so that the gain reacts rapidly to changes of pump or signal power and the changes of gain also cause phase changes which can distort the signals. This nonlinearity presents the most severe problem for optical communication applications. However it provides the possibility for gain in different wavelength regions from the EDFA.

 

Raman Amplifier (eg. DRMA)

 

Fiber Raman amplifier scattering of incoming light with phonons in the lattice of the gain medium produces photons coherent with the incoming photons. The most common version is Distributed Multi-pump Raman Amplifier (DMRA). However, unlike EDFA amplifiers, this technique does not use doped fiber, just a high power pumping laser. The laser is operated at wavelengths 60nm to 100nm below the desired wavelength of the signal. The laser signal energy and the photons of the transmitted signal are coupled, thereby increasing the signal strength. The principal advantage of Raman amplification is its ability to provide distributed amplification within the transmission fiber, thereby increasing the length of spans between amplifier and regeneration sites.

The Raman gain spectrum of optical fiber exhibits a broad continuum shapes due to amorphous nature of the material. The peak value of Raman gain coefficient is inversely proportional to pump wavelength. In other word, Raman gain shape is wavelength/frequency dependent. In the Fiber Raman amplifier, when the signal and a high-power pump are injected into a fiber together, and the signal is within the Raman gain region of the pump, the signal will be amplified.

Raman amplifiers have some fundamental advantages:
Raman gain exists in every fiber, which provides a cost-effective means of upgrading from the terminal ends. The gain is nonresonant, which means that gain is available over the entire transparency region of the fiber ranging from approximately 0.3 to 2μm. The gain spectrum can be tailored by adjusting the pump wavelengths. For instance, multiple pump lines can be used to increase the optical bandwidth, and the pump distribution determines the gain flatness. It is a relatively broad-band amplifier with a bandwidth > 5 THz, and the gain is reasonably flat over a wide wavelength range.

However, a number of challenges for Raman amplifiers prevented their earlier adoption:
Compared to the EDFAs, Raman amplifiers have relatively poor pumping efficiency at lower signal powers. Although a disadvantage, this lack of pump efficiency also makes gain clamping easier in Raman amplifiers. Raman amplifiers require a longer gain fiber. However, this disadvantage can be mitigated by combining gain and the dispersion compensation in a single fiber. A third disadvantage of Raman amplifiers is a fast response time, which gives rise to new sources of noise, as further discussed below. There are concerns of nonlinear penalty in the amplifier for the WDM signal channels.

Fiber optical parametric amplifier (FOPA)

 

Fiber optical parametric amplifier in according with the four-wave mixing. In quantum-mechanical terms, FWM occurs when photons from one or more waves are annihilated and new photons are created at different frequencies such that the net energy and momentum are conserved during the parametric interaction. We can see it is s bandwidth of several hundred nanometers by use of silica fibers and just one or two pumps with power of the order of a few watts. Arbitrary center wavelength by changing the zero-dispersion wavelength of the fiber. It is easy to obtain large gain (pump power & fiber length). The noise of a phase-sensitive FOPA can actually approach 0 dB. Wavelength conversion is accompanied by spectral inversion. this is a quite important advantage. The Fiber optical parametric amplifier gain two pump photons annihilate themselves to produce a signal photon and an idler photon. Comparison of other optical amplifiers shown as following figure.

 

Summary

 

Each amplification technique has advantages and disadvantages. Remember to keep in mind the amplification that the amplifier is being used in. For example, if a signal needed amplification but noise was an issue, a DMRA would most likely be the best choice. If the signal needed to be amplified by just a small amount, the SOA might be best.

All of these amplification methods have one big advantage: optical amplifiers will amplify all signals on a fiber at the same time. Therefore, it is possible to simultaneously amplify multiple wavelengths. But it is important to keep in mind that the power levels must be monitored carefully because the amplifiers can become saturated, thereby causing incorrect operation.

 


Fiber-Mart EDFA Solution

 

EDFA is in small volume, low power consumption, and easy to use. What’s more, it is convenient to install all kinds of application systems, such as SDH frame inside, CATV machine box, DWDM system frame. Fiber-Mart.COM mainly provides EDFA optical amplifiers including CATV EDFA, SDH EDFA and DWDM EDFA. These three versions are severally used in CATV, SDH and DWDM networks.

 

CATV EDFA

Fiber-Mart 0de23aec345e4bed91235239e6c2bd27.image.550x550.jpg
CATV Amplifier is increasingly able to get attention with the coexistence of CATV network for hybrid fiber and coax structure of a variety of systems, especially the front-end centralized system, point-to-multipoint light wave structure and long-distance trunk transmission system. For CATV designers most commonly tree distribution network, the efficiency of the system is determined by the cost per user. Therefore, the use of CATV EDFA to improve the optical power can be the the original transmitting equipment on the basis of service for more users, thereby reducing the cost of the transmitter units of milliwatts. CATV optical amplifier is used to increase the output power of the transmitter and prolong the signal transmission distance. It is widely applied for TV signals, digital video, telephone, and data long haul transmission.

Fiber-Mart provides high output power and low noise CATV EDFA optical amplifiers (as shown in the right figure) with range of output power from 13dBm to 23dBm to meet the requirements of a high-density solution for the large-scale distribution of broadband CATV video and data signals to video overlay receivers in a FTTH/FTTP or PON system.

 

Features of Fiber-Mart CATV Optical Amplifier


Low noise figure and high gain Input and output optical isolator Flexible monitoring interface Adopting high-quality pump laser diode and erbium-doped optical fiber Standard rack and easy for installation and maintenance Advanced automatic power control and automatic temperature Control circuit to ensure the performance 13-23dBm output power RS232/RJ45 communication interface optional High efficiency switch power supply RS232/485 interface optional for remote monitoring and control

SDH EDFA

 

SDH Amplifier is a device to amplify light and extend the transmission distance of the digital networks when installed in output terminal of digital network. It is designed for the Synchronous Digital Hierarchy (SDH) applications. (6dB SDH amplifier as shown in the folllowing figure).

Fiber-Mart booster-edfa.jpg

Fiber-Mart provides profitable and reliable SDH EDFA optical amplifiers (including EDFA-BA, EDFA-LA, EDFA-PA) for various kinds of SDH transmission system and they can be also used for Metropolitan Area Network (MAN), Gigabit Ethernet Data Network, and Access Network.

 

Features of Fiber-Mart SDH Optical Amplifier

Low noise figure and typical is less than 4.5 dB 1U 19 inches rack mounts wide Input wavelength range is 1200nm to 1650 nm Supports multi-mode signal input High stability and reliability with the MTBF more than 150000 hours Hot swap for network management and agent perfect network management Includes Ethernet, RS-485 and RS-232 interfaces Supports telnet and standard SNMP network management Output power is adjustable by panel or network management High precision AGC/APC and precision is ±0.05 dB High precision ATC circuit and temperature control accuracy is less than ±0.1℃ With intelligent temperature control system that power consumption and hot radiation reduce 30% than common products OEM is available compatible with BellcoreGR-1312-CORE

DWDM EDFA

Fiber-Mart 5709ed40ea3bad04a7666b938f15ec1d.image.550x550.jpg
DWDM Amplifier is a key component in DWDM network. It uses an optical supervisory channel power adjustment and extends the power link budget for long distance DWDM communication systems. As the operating bandwidth of the EDFA has 30nm, it can zoom back of a plurality of different wavelength optical signals, and so it can be very conveniently used in DWDM systems to compensate for various optical attenuation.

With gain flattening filter (GFF), EDFA offers constant flat gain for multi-channel DWDM systems. The DWDM EDFA works at C-band(1528 to 1603nm) or L-band (1570 to 1604nm), integrates electric driver, remote control, temperature control,and alarm circuits all together in a small package. The DWDM EDFA has assembled up to three pump lasers to meet the different output power levels required by DWDM systems and protect the pump failure.

Fiber-Mart provides DWDM EDFA optical amplifiers in different channel from 40 to 80 channels. These amplifiers offer high optical gain, low noise figure and high saturation optical power which are fully integrated with various kinds of DWDM system.

 
Features of Fiber-Mart DWDM Optical Amplifier

Low noise figure with typical 4.5dB and high flatness with typical 1dB Covers whole C-band and carries 40 or 80 channels Redundancy hot swap power module with 110/220VAC and 48VDC can plug mix Perfect network interfaces includ Ethernet, RS-485 and RS-232 port Supports telnet and SNMP network management Gain can be adjustable by network and manual High precise AGC and ATC circuit High saturation output power Flexible mechanics and circuit structure (including module, 1U rack and gain block structures) OEM is available Compatible with Telecordia GR-1312-CORE


Featured Products
Bulk Fiber Optic Cable

Fiber-MART low price of fiber optic cable

OM3,OM4 Fiber, Tight Buffer, Indoor & Outdoor, LSZH, Figure8, ADSS Fiber Cables
Fiber Optic Patch Cable

Fiber-MART fiber optic patch cable for sale

10G Patch Cable, Single Mode, Multimode, Armored, MPO/MTP Trunk Cables, & Pigtails
Fiber Optic Transceiver

Fiber-MART buy fiber optic transceiver

SFP, SFP+, XFP,XENPARK, DWDM,CWDM 40G QSFP+ &CFP Modules
 
Email for Technical Tips
-consulting for technical supports or relevent product buying guide
Email for [email protected]

 

Comments: (0)

No comments have been posted yet.

Leave a Comment
You must be logged in to submit a comment.
Copyright © 2009-2024 Fiber-MART.COM All Rights Reserved. Privacy Notice. Terms of Service
Fibermart ISO9001Fibermart Secure Certificate
Product Tags: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Email us