Perfect Couple: Fiber Splice Tray and Fiber Enclosure
In the cabinet, we may find many devices and gadgets, such as fiber patch panel, fiber splice tray, fiber enclosure, adapter panel and zip ties which are all little but critical components for cable management. Fiber patch panel, the one we have cued for a lot of times, will give way to fiber splice tray and fiber enclosure, the two subjects that we will introduce today.
Fiber Splice Tray Unveil
As we all know, it is usually unavoidable to match splice fiber optic cables with fiber pigtails in data center, which not only demands lower space requirement but also allows a better network performance compared with other fiber optic termination methods.
Fiber splice tray, very popular in data center and server room, is a plate to store the fiber cables and splices and prevent them from becoming damaged or being misplaced. Splice trays are necessary for holding and protecting individual fusion splices or mechanical splices. One of the important factors of fiber splice tray is the fiber count that it can hold. Most fiber splice tray can hold up to 24 fiber splices. 12-fiber splice trays are the most commonly used fiber splice tray in fiber optic network.
A Closer Look At Fiber Enclosure
It is a box that contains the devices to connect various fiber optic cables. Fiber enclosures can be classified into two configurations, namely rack mount fiber enclosure and wall mount fiber enclosure. And the rack mount fiber enclosure can be further categorized by its height and the design. We have 1U, 2U and 4U choices. The rack mount enclosures come in two flavors. One is the slide-out variety , and the other incorporates a removable lid which requires the user to remove the whole enclosure from the rack to gain internal access.
How The Two Coordinate?
Owning solely a fiber splice tray is far more enough. It should be equipped with a device to provide a safe and easy-to-manage environment for fiber splices. Apart from fiber optic splice closure, fiber distribution box and fiber optic enclosure, we can adopt the fiber enclosure displayed today. Fiber splice tray can be installed in fiber enclosure.
Here takes the example of fiber splice tray used in FHD fiber enclosure of fiber-mart.COM as shown in the following picture. It is a 96-fiber enclosure which has four 24-fiber adapter on the front panel. This 1U fiber enclosure can hold up four 24-fiber splice tray to provide the space for 96 fiber optic splices.
As optical fibers are sensitive to pulling, bending and crushing forces, fiber splice tray and fiber enclosure serve as double protections which are used to provide a safe routing and easy-to-manage environment for the fragile optical fiber splices. Attention! Bare fibers without protection tubes should never be exposed outside of a splice tray. It’s our pleasure to provide you with the best solutions.
Other news for Thursday 09 May, 2019
News for Wednesday 08 May, 2019