10 dBm Output Single Channel In-Line EDFA Optical Amplifier for SDH Networks
Fiber-Mart SDH-EDFA-LA-O10 in-line amplifier designed for the Synchronous Digital Hierarchy (SDH) applications are specifically designed for single wavelength optical transmission system to replace traditional O-E-O repeaters. It operates in the middle of an optical link designed for optical amplification between two network nodes on the main optical link. The device features wide input power range from -25dBm to -10dBm, output power up to 10dBm and low noise figure. It also includes RS-232 computer interface.
This Rack mountable amplifier work by default in constant signal-gain mode, but they can be configured to constant total output-power mode. These units are used in long-hauls transmission applications, especially for PDH, SDH, SONET and optical Ethernet transmission application. Its ease-of-use and performance make the SDH-EDFA-LA-xx series the ideal solution for Access and Metro optical networks.
Features
-
Service as a In-Line amplifier C-Band 1550nm
-
Tunable output power: 10dBm
-
Wide input power range: -25dBm to -10dBm
-
Low loise figure: typical is< 4.5dB
-
Connectors: SC/UPC, SC/APC, FC/UPC, FC/APC, LC/UPC, LC/APC, ST/UPC and ST/APC connectors are available
-
Single or dual 110VAC, 220VAC, -48VDC, and/or 100V-240V power supply
-
Serial interface comes with RS232, RS485
-
1U 19” rack mount structure for easy installation
-
All performance compatible with BellcoreGR-1312-CORE request
-
Use for Access and Metro optical networks
-
Works with point-to-point applications
-
High stability and reliability
-
3 years warranty
-
10 years of operation life
-
OEM is available
Highlights
-
Hot Swap Network Management Agent
-
SNMP network management interface: RJ45
-
Support Telnet for optional
-
ASE noise filter & ASE suppression filters
-
High Precise ACC (automatic constant current) Circuit as default, if you need other circuit, please contact at [email protected]
-
ATC (automatic temperature control) function
-
Offering status appearance and diagnosing fault with LCD
Mechanical Structure
Structure Example
NOTE:
-
The SDH EDFA from Fiber-Mart including 1+2+3.
Parameters |
Symbol |
Min |
Typ |
Max |
Unit |
Operation Wavelength |
λc |
1530 |
1550 |
1562 |
nm |
Saturated output power (1) |
Po |
|
|
10 |
dBm |
Input power (2) |
Pi |
-25 |
|
-10 |
dBm |
Gain |
G |
------ |
|
------ |
dB |
Noise Figure |
NF |
|
4.5 |
|
dB |
Input Isolation |
ISOi |
30 |
|
|
dB |
Output Isolation |
ISOo |
30 |
|
|
dB |
Input pump leakage |
PumpLin |
|
|
-35 |
dBm |
Output pump leakage |
PumpLout |
-45 |
|
-45 |
dBm |
Return Loss |
RL |
|
|
-45 |
dB |
Polarization Dependent Gain |
PDG |
|
|
0.3 |
dB |
PMD |
PMD |
|
|
0.5 |
ps |
Operation Temperature |
Tw |
-5 |
|
60 |
℃ |
Storage Temperature |
Ts |
-40 |
|
80 |
℃ |
Humidity (3) |
|
10 |
|
85 |
% |
Power Voltage |
Vps |
85/170 |
110/220 |
132/264 |
VAC |
Power Consumption |
P |
|
|
18 |
W |
Serial interface |
RS232, RS485 |
Power supply |
110VAC, 220 VAC, -48VDC, or 100V-240V |
Connectors |
Simplex SC/UPC, SC/APC, FC/UPC, FC/APC, LC/UPC, LC/APC , ST/UPC and ST/APC available |
Warranty |
3 years |
(1): Customer optional
(2): Pre-Amplifier: input power –35~-25dBm; Inline-Amplifier: input power –25~-10dBm, Booster: input power –10~+6dBm
(3): No condensation