4E1+1*10/100/1000M PDH Fiber Optical Multiplexers Singlemode Dual Fiber 20KM 19 Inch Rack(with the orderwire phone)
The 4E1+1*10/100/1000M PDH Fiber Optical Multiplexers is designed as point to point optical transmission system based on Application Specific Integrated Circuit (ASIC). It integrates the traditional PDH multiplexer and 1000Mbps Ethernet optical transceiver, and can realize the 4 E1s and 1000Mbps wire-speed Ethernet transmission over fiber.
Specifications
-
Single mode dural optical port-4 channels of E1 ports
-
1 Enthernet port share 10M or 100M or 1000M bandwidth
-
Low power consumption
-
ISO certification
-
Optional Power redundancy to ensure stable system
-
Optional function of ALS and SNMP
-
Optional fiber redandancy are provided
-
Optional orderwire phone are provided
Main Feature
-
The 4E1 to fiber multiplexer
-
1 Enthernet port share 10M or 100M or 1000M bandwidth
-
Provide function of 4E1 remote loop,fiber local loop,and 1 interface phone
-
Optional power 1+1 to ensure stable system
-
Two fiber two direction and single fiber two direction
-
1+1 power,orderwire phone and the ALS and SNMP are optinal,Please state the requirement when in order
-
4E1 PDH multiplexer realizes 1~4E1 transmission over fiber
-
E1 spur track loop back testing features, easy to be installed and maintenance
-
External dimensions: 19-inch rack (with distribution frames rack)
-
Optical optional by customer 's requirement
Interface
E1 interface |
4E1 interface for 8E1 |
E1 rate: 2.048Mb/s±50ppm |
Code type: HDB3 |
E1 Style: Pinfet
|
E1 comply with ITU-T G.703 |
Jitter compl y with ITU-T G.823 and G.742 |
E 1 with DB37. Be ab le to be with 75Ω (BNC) or 120Ω (RJ45) by adaptor in the accessory |
Fiber |
Optical rate: 21.120Mbit/s |
optical style:1B1H
|
Default: dual fiber, single mode, 20km (40km optional) |
connector: FC /SC |
wavelength:1310nm |
Receiver sensitivity:≤ -38dBm(BER ≤ 10-11) |
Ethernet |
1 Ethernet ports with RJ45 connector |
MAC address table capability : 1024
|
MAC address table aging time |
The minimum frame length : 64bytes |
The maximum frame length : 1916 bytes |
Working mode : full/half duplex configurable |
Support VLAN, Stream control |
Bandwidth : 1 Ethernet ports shared 10 or 100M or 1000M bandwidth |
Power Requirements
-
Power Input: AC /DC optional
-
AC180V~240V
-
DC-36V~DC-72V
-
DC+20V~DC+36V
-
Power Consumption: <6Walt
Working Environment
-
Operating Temperature: 0℃ ~+50℃
-
Storage Temperature: -40℃ ~+70 ℃